The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A mixture proportioning method for the development of performance-based alkali-activated slag-based concrete
Open accessAbstract
Abstract This paper reports a general mixture design procedure for alkali-activated slag concrete, which is an essential step towards industrial application. The procedure involves three steps: 1) the determination of coarse and fine aggregate ratio according to close packing model; 2) the determination of liquid phase (water content and activator) based on compressive strength; and 3) the determination of excess paste content by workability requirement and measurement. Effects of mixture proportional factors, including activator composition, water content, fly ash content, and binder/aggregate ratio are examined on consistency, setting time and compressive strength. The relationship between performance and precursor composition is established using simplex centroid design method. Using the mixture proportioning method, alkali-activated concretes with compressive strength grades of C40, C60, and C80 are successfully prepared with initial setting time of 1–3 h and slump of more than 200 mm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Role of carbonates in the chemical evolution of sodium carbonate-activated slag binders
Bernal, S. A., Provis, J. L., Myers, R. J., San Nicolas, R., & van Deventer, J. S. J. (2015) · Materials and Structures · doi:10.1617/s11527-014-0412-6 · Cited by 334
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationA review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials
Sun, B., Ye, G., & de Schutter, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126843 · Cited by 386
A review on mixture design methods for geopolymer concrete
Li, N., Shi, C., Zhang, Z., Wang, H., & Liu, Y. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107490 · Cited by 351
Self-citationLiu, Y., Shi, C., Zhang, Z., Li, N., & Shi, D. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103665 · Cited by 351
Self-citationLiu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103670 · Cited by 286
Self-citation
Metadata
- Authors
- Li, N., Shi, C., Zhang, Z., Zhu, D., Hwang, H.-J., Zhu, Y., & Sun, T.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 93
- Pages
- 163-174
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2884549249
- Cited by
- 238
- References
- 1
- FWCI
- 12.57
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A mixture proportioning method for the development of performance-based alkali-activated slag-based concrete. https://app.cochat.ai/papers/10.1016/j.cemconcomp.2018.07.009
- The paper
- Li, N., Shi, C., Zhang, Z., Zhu, D., Hwang, H.-J., Zhu, Y., & Sun, T. (2018). A mixture proportioning method for the development of performance-based alkali-activated slag-based concrete. Cement and Concrete Composites. https://doi.org/10.1016/j.cemconcomp.2018.07.009
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.