The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Compressive strength and hydration process of wet-grinded granulated blast-furnace slag activated by sodium sulfate and sodium carbonate
Abstract
In this study, the super-fine ground granulated blast furnace slag was obtained by wet grinding (i.e. WGBBS), and an attempt to activate the super-fine ground granulated blast furnace slag by sodium sulfate (SS) and sodium carbonate (SC) was made. SS/SC-activated WGGBS samples were prepared and cured at the room temperature. The compressive strength at the age of 3 d, 7 d, 28 d, and 56 d was tested. Hydration heat was assessed, and micro structure and hydrates were also characterized with XRD, TG-DTG, SEM-EDS, and NMR; the pore structure was assessed with MIP. The results showed that SS and SC efficiently activated the hydration of WGGBS with D50 = 3.87 μm at the room temperature, and such high activating efficiency of SS and SC under room temperature was seldom reported in the literature. The mechanism behind was mainly because of the super-fine particles of slag with greater amounts of hydration points, which were produced in the process of wet grinding. Difference in activating efficiency between SS and SC was mainly because the anionic groups acted as different roles in hydration process: SS could induce the formation of ettringite while SC could induce the formation of calcite. Such results were expected to provide guidance on designing weak base-activated slag system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Durability of Alkali‐Activated Materials: Progress and Perspectives
Bernal, S. A., & Provis, J. L. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12831 · Cited by 547
Ke, X., Bernal, S. A., & Provis, J. L. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.11.012 · Cited by 328
The Role of Al in Cross‐Linking of Alkali‐Activated Slag Cements
Myers, R. J., Bernal, S. A., Gehman, J. D., van Deventer, J. S. J., & Provis, J. L. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13360 · Cited by 287
Structural evolution of an alkali sulfate activated slag cement
Mobasher, N., Bernal, S. A., & Provis, J. L. (2016) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2015.11.016 · Cited by 186
Cited by
Hydration Characteristics and Microstructure of Alkali-Activated Slag Concrete: A Review
Fu, Q., Bu, M., Zhang, Z., Xu, W., Yuan, Q., & Niu, D. (2023) · Engineering · doi:10.1016/j.eng.2021.07.026 · Cited by 272
Recent progress in understanding setting and hardening of alkali-activated slag (AAS) materials
Jiang, D., Shi, C., & Zhang, Z. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104795 · Cited by 165
Lao, J.-C., Xu, L.-Y., Huang, B.-T., Zhu, J.-X., Khan, M., & Dai, J.-G. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1142237 · Cited by 86
Luo, Y., & He, D. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-15254-x · Cited by 79
Metadata
- Authors
- Tan, H., Deng, X., He, X., Zhang, J., Zhang, X., Su, Y., & Yang, J.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 97
- Pages
- 387-398
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2913333821
- Cited by
- 206
- References
- 5
- FWCI
- 18.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.