Ambient temperature cured ‘just-add-water’ geopolymer for 3D concrete printing applications
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
This paper aims to enhance the printability performance (namely open time and buildability) and mechanical properties (namely compressive strength) of a recently developed ‘one-part’ (just-add-water) geopolymer for 3D-concrete-printing (3DCP) applications. A combination of slag and fly ash was activated with two different grades of sodium silicate powders with different combinations. The influences of type and dosage of solid activators and the retarder content on the resultant geopolymers in fresh and hardened states were investigated using several mixtures to identify an optimum mixture. Subsequently, the printability performance (including open time, extrudability, buildability and shape-retention-ability), along with the rheological properties (including static yield stress evolution, dynamic yield stress, plastic viscosity and thixotropy) of the optimum mixture were evaluated. In addition, the printed specimens made of the optimum mixture were tested in compression and flexure in different directions. Based on the results, the optimum mixture exhibited a combination of long open time, and excellent extrudability, buildability, shape-retention-ability and thixotropic behavior, all of which are desirable for large-scale 3DCP applications. In addition, the high mechanical properties of the printed specimens ascertained the optimum mixture can be used for 3DCP of structural members. Moreover, the material sustainability indicators showed production of the optimum 3D-printable geopolymer mixture requires 14% less energy and emits 61% less CO2 than those of a 3D-printable Portland cement-based mixture with comparable compressive strength. It is anticipated that development of such 3D-printable ‘one-part’ geopolymers considerably promote large-scale applications and commercial viability of geopolymers in the context of 3DCP.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Recent update on the environmental impact of geopolymers
Habert, G., & Ouellet-Plamondon, C. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.6 · Cited by 330
Activating solution chemistry for geopolymers
Provis, J. L. (2009) · Geopolymers · doi:10.1533/9781845696382.1.50 · Cited by 184
Cited by
Factors Affecting the Compressive Strength of Geopolymers: A Review
Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021) · Minerals · doi:10.3390/min11121317 · Cited by 231
Metadata
- Authors
- Bong, S. H., Xia, M., Nematollahi, B., & Shi, C.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 121
- Pages
- 104060
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W3159240220
- Cited by
- 193
- References
- 3
- FWCI
- 12.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ambient temperature cured ‘just-add-water’ geopolymer for 3D concrete printing applications. https://app.cochat.ai/papers/10.1016/j.cemconcomp.2021.104060
- The paper
- Bong, S. H., Xia, M., Nematollahi, B., & Shi, C. (2021). Ambient temperature cured ‘just-add-water’ geopolymer for 3D concrete printing applications. Cement and Concrete Composites. https://doi.org/10.1016/j.cemconcomp.2021.104060
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.