Effect of elevated temperatures on geopolymer paste, mortar and concrete

Properties of concrete

Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444

Geopolymer technology: The current state of the art

Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742

Geopolymers

Davidovits, J. (1991) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01912193 · Cited by 4,305

Alkali-activated fly ashes

Palomo, A., Grutzeck, M. W., & Blanco‐Varela, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,408

On the Development of Fly Ash-Based Geopolymer Concrete

Hardjito, D., Wallah, S. E., Sumajouw, D. M. J., & Rangan, B. V. (2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,256

Geopolymeric materials prepared using Class F fly ash and elevated temperature curing

Bakharev, T. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.031 · Cited by 953

Fire-resistant geopolymer produced by granulated blast furnace slag

Cheng, T., & Chiu, J. P. (2003) · Minerals Engineering · doi:10.1016/s0892-6875(03)00008-6 · Cited by 850

Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures

Kong, D., Sanjayan, J., & Sagoe‐Crentsil, K. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.021 · Cited by 809

The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applications

Jaarsveld, J. G. S. V., van Deventer, J. S. J., & Lorenzen, L. (1997) · Minerals Engineering · doi:10.1016/s0892-6875(97)00046-0 · Cited by 685

Damage behavior of geopolymer composites exposed to elevated temperatures

Kong, D., & Sanjayan, J. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.08.001 · Cited by 582

Durability Behaviour of Geopolymer Concrete with Metakaolin and GGBS

(2019) · International Journal of Innovative Technology and Exploring Engineering · doi:10.35940/ijitee.b1019.1292s219

Alkali Activated Black Cotton Soil with Partial Replacement of Class F Fly Ash and Areca Nut Fiber Reinforcement

Chethan, B. A., Shankar, A. U. R., Chinnabhandar, R. K., & Kumar, D. H. (2022) · Lecture notes in civil engineering · doi:10.1007/978-981-19-2145-2_88

Influence of Synthesizing Parameters on the Compressive Strength of Geo-Polymer Mortar

Rao, J. V., & Rao, K. S. (2012) · International Journal of Advanced Materials Science · doi:10.37622/ijams/3.3.2012.147-152

A Review of Microstructural and Mechanical Properties of Geopolymer Concrete

(2019) · International Journal of Advances in Structural and Geotechnical Engineering · doi:10.21608/asge.2019.271037

Corrosion Resistance of Geopolymer Based Materials

(2017) · International Journal of Advances in Structural and Geotechnical Engineering · doi:10.21608/asge.2017.262544

Study on Mechanical and Durability Characteristics of Sustainable Geopolymer Concrete

Sankaranarayanan, R., & Vivekanandan, G. (2023) · International Journal for Research in Applied Science and Engineering Technology · doi:10.22214/ijraset.2023.49473

Effect of Fine Aggregate and PVA Fiber Content on the Properties of Metakaolin-Based Engineered Geopolymer Composites

AbuFarsakh, R. (2022) · doi:10.31390/gradschool_theses.5661

Reação álcali agregado em cimentos álcali ativados: uma revisão bibliográfica

Programa de Pós Graduação em Engenharia Civil, U., Frare, A., Silva, D. A., Coordenação de Engenharia Civil, U., da Luz, C. A., rograma de Pós Graduação em Engenharia Civil, U., de Medeiros, M. H. F., & Programa de Pós Graduação em Engenharia Civil, U. (2023) · Congreso Latinoamericano de Patología de la Construcción (CONPAT) · doi:10.21041/conpat2023/v1cc1306

EFFECT OF CALCINATION ON THE CHLORINE CONTENT IN THE SIDOARJO MUD-BASED GEOPOLYMERS

Mulizar, A. F., & Mulizar, A. F. (2023) · Journal of Southwest Jiaotong University · doi:10.35741/issn.0258-2724.58.5.54

Aglomerante álcali-ativado de parte única

Geraldo, R. H. (2020) · doi:10.47749/t/unicamp.2020.1237404

Removal of hydrogen sulfide from biogas using red rock materials

Mrosso, R. (2020) · doi:10.58694/20.500.12479/992

Effect of elevated temperature on properties of neem seed husk ash concrete

Mwilongo, K. P. (2020) · doi:10.58694/20.500.12479/973

High-Strength Geopolymer Mortar Using Slag Activated with Silica-Fume

Phan, D.-H., Vo, T. T. G., Vo, V. H., Nguyen, T. T., & Lê, A. T. (2023) · Lecture notes in civil engineering · doi:10.1007/978-981-99-7434-4_86

Study on Mechanical Properties of Alkali-Activated Concrete Developed using Bio Cementation Process

Nihar, C., & Rao, U. V. N. (2023) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/1280/1/012028

CHARACTERISTICS OF GEOPOLYMER CONCRETE PRODUCED USING BANANA FIBER AND COAL ASH

(2023) · International Research Journal of Modernization in Engineering Technology and Science · doi:10.56726/irjmets47663

Water transport properties and Life Cycle Assessment of low-grade fly ash based cementitious materials

Kumar, M., & Harish, K. V. (2023) · Report · doi:10.2749/newdelhi.2023.0303

Improvement of thermal resistance and force loading by developing and optimizing geometry in 3D printed brick

Babaeyanahmadi, H. (2024) · doi:10.20868/upm.thesis.80462

Advantages of Geopolymer Concrete in Infrastructure Applications

Akhnoukh, A. (2024) · Advances in Science, Technology & Innovation/Advances in science, technology & innovation · doi:10.1007/978-3-031-47612-9_7

Experimental Evaluation of Mechanical Properties, Micro Structure and Post-Fire Strength of Fiber Reinforced Geopolymer Concrete

Saffar, M. E. A. (2024) · Power System Technology · doi:10.52783/pst.349

Performance of Recycled Aggregate Concrete Containing Hooked-End Steel Fibers at Elevated Temperatures

Zaidi, S. A., Khan, M. A., & Naqvi, T. (2024) · Lecture notes in civil engineering · doi:10.1007/978-981-99-9458-8_51

Durability Assessment of Green Cement Concrete Using Industrial Waste with Dry Geopolymer

Parthiban, D., Vijayan, D. S., Kumar, A., Kumar, N., & Kumar, R. (2024) · Lecture notes in civil engineering · doi:10.1007/978-981-99-9458-8_34

Aerated Geopolymers for Building Decarbonization: Mix-Design, Chemistry, Microstructure, and Hygrothermal Performance

Degefu, D. M. (2024) · doi:10.32920/26883757

Aerated Geopolymers for Building Decarbonization: Mix-Design, Chemistry, Microstructure, and Hygrothermal Performance

Degefu, D. M. (2024) · doi:10.32920/26883757.v1

A research on preparation and thermal stability of the geopolymer prepared from the tailings of processed ion-absorbed rare earth ores

Jiao, X., Li, L., & Li, J. (2024) · Acta Mineralogica Sinica · doi:10.3724/j.1000-4734.2024.44.056

Experimental investigation and molecular simulation of the damage process of alkali-activated slag at high temperatures

Zhang, Z., Yin, H., Ji, Y., Zhao, Y., & Ma, M. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e04212

Bond behavior between steel and solid waste concrete activated by soda residue and carbide slag in concrete-filled steel tubes (CFSTs)

Li, H., Li, M., Guo, W., Zhao, Q., & Zhang, H. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e04383

Investigation of the Effect of High Temperature on the Microstructure of Conventional Concrete Containing High Grade of Portland Cement

Mansourghanaei, M. (2025) · Journal of Civil Engineering Researchers · doi:10.61186/jcer.7.1.62

Artificial Intelligence in Geopolymer Concrete Mix Design: A Comprehensive Review of Techniques and Applications

Mushthofa, M., Thedy, J., Teguh, M., Purwanto, P., Pratama, A. G., & Lie, H. A. (2025) · Iranian Journal of Science and Technology Transactions of Civil Engineering · doi:10.1007/s40996-025-01873-8

Physical and Mechanical Properties of Innovative One-Part Geopolymer Concretes: Utilization of Magnesium SlagPreprint

Mazlum, T. Ö., & Atmaca, N. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5256909

Understanding the Binder Chemistry, Microstructure, and Thermo-Mechanical Properties of Metakaolin Under Alkali, Acid Activation—A Comparative Study

Sharmila, G., Vanitha, N., Karuppaiyan, J., & Jeyalakshmi, R. (2025) · Lecture notes in civil engineering · doi:10.1007/978-981-96-1554-4_9

Laboratory Study of Weight Loss and Ultrasonic Wave Propagation Velocity in Conventional Concrete Under High Temperature, Along with Validation by SEM and XRD Analysis

Mansourghanaei, M. (2025) · Journal of Civil Engineering Researchers · doi:10.61186/jcer.7.2.68

Characterization of steel corrosion in alkali-activated mortars using advanced techniques

Gartner, N., Hren, M., Kosec, T., & Legat, A. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e05165

Prediction of Compressive Strength of Fly Ash-Based Geopolymer Concrete Based on Machine Learning

Xufeng, S. H. I., Danjing, D. I. N. G., Song, H., Wu, H., & Quan, A. N. (2025) · Industrial Construction · doi:10.3724/j.gyjzg24102302

Explainable multi-output AI modeling for Fly Ash-Ground Granulated Blast Furnace Slag geopolymers: Predicting strength, workability, and embodied carbon

Jaucian, M. C. A., & Promentilla, M. A. B. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e05407 · Cited by 2

Development of Laterite Tailings–Based Geopolymer Activated With Macadamia Nutshell Ash

Cherotich, E., Nthiga, E. W., Muthakia, G. K., & Kugeria, P. M. (2025) · Journal of Chemistry · doi:10.1155/joch/4172494

Alkali-activated reactive powder concrete with recycled and industrial steel fibres

Farhan, N. A., Sheikh, M. N., & Hadi, M. N. S. (2024) · Proceedings of the Institution of Civil Engineers - Construction Materials · doi:10.1680/jcoma.25.00067

The potential for using geopolymer concrete in the UK

Heath, A. C., Paine, K. A., Steve, G., Ramage, M. H., & Lawrence, M. (2019) · ICE Publishing eBooks · doi:10.1680/icetlcc.64591.251

Development of sustainable UHPC using waste glass as a total replacement of silica fume and natural sandPreprint

Lam, W. L., Shen, P., & Poon, C. S. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5995554

Study on Rheological, Mechanical and Durability Properties of Self-compacting Geopolymer Mortar

Santhosh, A. M., & Sathyan, D. (2026) · Lecture notes in civil engineering · doi:10.1007/978-3-032-04149-4_5

Mechanical behavior and microstructural performance of geopolymer recycled mortar incorporating CNTs and GO under elevated temperatures

Liu, C., Ding, W., Wang, Y., & Li, G. (2026) · Advances in Structural Engineering · doi:10.1177/13694332261415709

Characteristics of Fly Ash-Based Geopolymer Aerated Mortar Using Various Stabilizing Agents

Dewi, M. S., Wang, W.-C., & Lin, W. (2026) · Lecture notes in civil engineering · doi:10.1007/978-3-032-14011-1_48

Comparison between mechanical properties of geopolymer and conventional concrete: A review

Mahdi, Z. H., Jaber, F. K., Abdulghani, G. R., Mohsin, Z. M., Wameed, M., & Baiyati, A. A. (2026) · AIP conference proceedings · doi:10.1063/5.0306076

Postheating Compressive Behavior of Carbon Fiber–Wrapped, Geopolymer Concrete–Filled GFRP Composite Tubes after Elevated-Temperature Exposure

Ebrahimzadeh, M., Bazli, M., Azimi, Z., Shakiba, M., Siavoshi, A., & Dalivand, A. J. (2026) · Journal of Composites for Construction · doi:10.1061/jccof2.cceng-5449

Modélisation de l'écaillage sous incendie des bétons par une approche thermo-hydro-mécanique du comportement : Analyse paramétrique des différents mécanismes d'occurence

Baydoun, R. (2019) · doi:10.70675/4f277ce7z1084z4b71zbd6az0082d910f567

Controlled dewatering, transportability and valorization of sediments

Hussan, A. (2022) · doi:10.70675/86529ca6zb676z483bz90e0zc666f5f584f0

Solid Foams from Geopolymerization of Lunar Regolith Simulants Slurries

Pedretti, M. E., Liggieri, L., Valentini, L., Canu, G., Lagazzo, A., Ravera, F., & Santini, E. (2026) · Colloids and Interfaces · doi:10.3390/colloids10020029

Phase evolution, mechanical retention, and microstructural changes of a sustainable alkali-activated ceramic-like material at elevated temperatures

Issa, M., Andrejkovičová, S., Zribi, M., Řimnáčová, D., Pálková, H., Patinha, C., Labrincha, J. A., Rocha, F. T., & Baklouti, S. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.04.282

Multiscale porous geopolymer-hydroxyapatite composite scaffolds fabricated via hollow-core bead assembly for bone tissue engineering

Kovářík, T., Hájek, J., Deshmukh, K., Dvořáková, J., Babuška, V., Wiesnerová, L., Svoboda, M., Beneš, J., Jansa, Z., Jandová, V., et al. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.110764

The effect of fibre type and usage ratio on the physical, mechanical and microstructural properties of low molarity ceramic waste powder-based geopolymer composites

Polat, A., Uysal, M., Akyüncü, V., & Avşar, Y. E. (2026) · European Journal of Environmental and Civil engineering · doi:10.1080/19648189.2026.2662485

Synergistic Effects of Multi-Source Solid Waste in Low-Carbon Cementitious Materials: Mechanical Properties, Physical Properties and Microstructures

Zhao, Y., Luo, H., & He, B. (2026) · Buildings · doi:10.3390/buildings16101951

Boron Nitride-Modified Hemp Nanofiber Reinforced Slag-Based Geopolymer Composites: Mechanical, Microstructural and Fire Resistance Performance

Filazi, A., Tezcan, İ. M., Akat, R., Doğan, D., & Erdem, Ü. (2026) · Polymers · doi:10.3390/polym18111288

Effect of microsilica and sodium silicate treatment on the fire resistance of recycled aggregate geopolymer concrete: macro and microstructural behaviour

Singh, P. K., Achintha, M., & Rajhans, P. (2026) · Materials and Structures · doi:10.1617/s11527-026-03154-w

Experimental and numerical study on impact behavior of G-UHPC beams after elevated-temperature exposure

Xu, S., Feng, J., Shao, R., Wu, P., & Wu, C. (2026) · Engineering Structures · doi:10.1016/j.engstruct.2026.123166

Full Scale Laboratory and Field Verification of Low Carbon Controlled Low Strength Material Incorporating High Excavated Soil Content for Sustainable Trench Restoration

Lee, S.-Y., & Le, T. H. M. (2026) · Transportation Geotechnics · doi:10.1016/j.trgeo.2026.102172

Development and characterisation of an optimum one-part geopolymer concrete mix with high mechanical strength

Narasimhamurthy, G. T., Prashanth, M. H., & Mattur, N. C. (2026) · Progress in Engineering Science · doi:10.1016/j.pes.2026.100323

Bacterial healing of cracks in metakaolin‐based geopolymer concrete exposed to high temperatures

Tanyıldızı, H., Ziada, M., Uysal, M., & Erdem, S. (2026) · Structural Concrete · doi:10.1002/suco.70680

Thermo-mechanical degradation and multiscale performance of hybrid PPS-MWCNT reinforced lightweight geopolymer composites

Al-Naghi, A. A. A., Ghazouani, N., Ahmed, M. E. B. K., & Nasir, U. (2026) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2026.2689177

Experimental analysis of the structural performance of modified geopolymer concrete

Sravanthi, M., Prashanth, M., Latha, T. M., & Bhoomesh, S. (2026) · AIP conference proceedings · doi:10.1063/5.0342021

Physio-mechanical evaluation of derived sodium silicate from rice husk ash in geopolymer

Kumar, S. P., & Ganesh, A. C. (2026) · Innovative Infrastructure Solutions · doi:10.1007/s41062-026-02824-6

Synergistic utilization of carbide slag and desulfurization gypsum to enhance the durability of alkali-activated materials

Zhao, Y., Wang, X., & Li, Z. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.07.508

Performance evaluation of waste rubber powder as an alternative to conventional sand in the structural concrete

Kanagaraj, B., Harini, A., Anand, N., & Lublóy, É. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.103068

Cracking damage and pore structure deterioration of slag/fly ash-based geopolymer concrete after exposure to high temperatures

Yang, Q., Duan, Z., Xue, L., Shi, X., Wang, M., Yang, W., & Zhang, Q. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.147757

Interfacial bonding behavior between geopolymer concrete and steel/FRP bars: a review

Zhang, P., Zhang, N., Gao, J., & Gao, Z. (2026) · Journal of Materials Science · doi:10.1007/s10853-026-12919-1

From Waste to Binder: Leveraging Industrial and Agricultural Solid Waste Streams for Sustainable Geopolymer Production

Bamigboye, G. O., Kırgız, M. S., & Alaneme, G. U. (2026) · Polymers for Advanced Technologies · doi:10.1002/pat.70720

Influence of colloidal silicon dioxide in the development of fly ash geopolymer aggregate

Ankamreddi, S., & Tripathi, R. K. (2026) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-026-16104-z

Alkali-activated composite solid-waste mortar using municipal solid waste incinerated fly ash as both precursor and aggregate: Mechanical properties, solidification and microstructural insights

Yang, H., Duan, Z., Yang, H., Li, F., Wang, H., & Jiao, D. (2026) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2026.106808

Effect of Aggressive Environments on Durability and Mechanical Properties of Fly Ash-Based Geopolymer Concrete

Shokouhy, A. H., Javid, A., Toufigh, V., & Ghaemian, M. (2026) · ACI Materials Journal · doi:10.14359/51750606

Electrothermal Activation of Carbon Nanofiber for Enhanced Early-Age Strength of Ultra-High Performance Concrete under Alternative Electric Field

Tian, W., Liu, X., Liu, Y., Zou, F., Cao, W., & Wang, X. (2026) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-23596

Elevated-temperature resistance of glass fiber-reinforced geopolymer concrete under different cooling regimes

Kantarcı, F., & Nehdi, M. L. (2026) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2026.101311

Impact of substituting fine aggregate with coal bottom ash on the fresh and hardened characteristics of self-compacting geopolymer mortar

Rokhman, A., Ardhianto, R., & Putri, D. (2026) · Journal of Building Pathology and Rehabilitation · doi:10.1007/s41024-026-00899-3

Incorporating copper slag as sustainable fine aggregate in geopolymer concrete: transport behaviour and fire resistance

Deep, A., & Sarkar, P. (2026) · European Journal of Environmental and Civil engineering · doi:10.1080/19648189.2026.2725096

Geopolymer composites with recycled waste glass for sustainable construction: mechanical performance, durability and thermal behaviour

Mohammad, A. A., Raman, S. N., Arashpour, M., Imjai, T., Rezania, M., & Garcia, R. (2026) · Journal of Asian Architecture and Building Engineering · doi:10.1080/13467581.2026.2727262

Mechanistic insights into element leaching behavior of CaxSiyOz clinker under alkali-activation: Roles of Ca/Si ratio, phase composition and Si-Skeleton nanostructure

Yang, H., Jiao, Z., Zhou, Q., Li, G., Dong, Z., Zhang, Z., & Shao, N. (2026) · Hydrometallurgy · doi:10.1016/j.hydromet.2026.106899

Influence of recycled clay brick and ceramic tile replacements on the mechanical performance of alkali-activated mortar

Mawlod, A. O., Mohammedameen, A., Humur, G. H., Alzeebaree, R., & Niş, A. (2026) · European Journal of Environmental and Civil engineering · doi:10.1080/19648189.2026.2737706

Optimization of Geopolymer Mortar Mix Design via Response Surface Methodology

Liu, N., Huang, W., Dong, B., Ai, L., Zhang, D., & 马天牧 (2026) · Advances in Civil Engineering · doi:10.1155/adce/9674744

Durability of a cement-free ultra-high performance geopolymer concrete: A laboratory comparison with Portland-cement UHPC validated by real marine exposure

Sleiman, Y., Oifi, B. E., Martin, C., Saiyouri, N., & Sbartaï, Z. M. (2026) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2026.e06583

Ab Initio Insights into the Interfacial Interactions of Emerging Two-Dimensional Nanomaterials with C-A-S-H Geopolymer Matrices

Lo, R., Misra, A., & Jayaramulu, K. (2026) · ACS Omega · doi:10.1021/acsomega.6c04834

Evaluation of agro-industrial waste-derived concrete composite for phenol adsorption: Process optimization, kinetics, isotherm modelling and mechanistic insights

Manjunath, S. V., Chandana, B. V., Samarth, M. S., Shriram, K., Prajwal, Y. M., Sankeerth, S., Girish, C. R., Mohan, B., & Murthy, A. S. (2026) · Results in Chemistry · doi:10.1016/j.rechem.2026.103954

High-performance self-compacting geopolymer concrete synthesised from black tea ash, waste-glass-derived activator, and recycled construction and demolition waste

Mamtha, D., & M, P. S. K. (2026) · European Journal of Environmental and Civil engineering · doi:10.1080/19648189.2026.2746480

Use of Magnetic Activated Carbon to Increase CO2 Absorption Capacity of Alkali-Activated Slag

Zheng, X., Zhang, C., Qing, L., & Cui, S. (2026) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-22478

Enhanced carbon dioxide adsorption of fly ash based zeolite-geopolymer composite via zeolite mixing and hydrothermal treatment

Yukun, J. I., Yang, C., Han, X., Li, X., Cui, X., Yang, Y., Hu, C., He, L., Jia, B., & Vandeginste, V. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.148653

Impact of water-to-binder ratio on the physical, mechanical and durability-related performance of industrial waste-based one-part geopolymer concrete

Mazlum, T. Ö., & Atmaca, N. (2026) · Discover Concrete and Cement · doi:10.1007/s44416-026-00124-x

Performance evaluation of ternary blended GGBFS based geopolymer concrete with silica fume and fly ash

Singh, K., Matharu, U. P. S., & Tiwary, A. K. (2026) · Next Sustainability · doi:10.1016/j.nxsust.2026.100564

Sustainable Optimisation of Ternary Geopolymer Binders Incorporating Industrial By-Products and a Bio-Based Superplasticiser: A Structure–Performance Approach

Shaju, A. C., Hrutika, M. R., Nagarajan, P., Sudhakumar, J., Thomas, B. S., Das, S., Althaf, M., & Sridhar, R. K. (2026) · Hybrid Advances · doi:10.1016/j.hybadv.2026.100770

Investigation of Geopolymer Mortar and Concrete Under High Temperature

Mane, S., & Jadhav, H. S. (2014) · Cited by 37

Alkali Activated Class F-Fly Ash Based Geopolymer Concrete at Elevated Temperatures

Glover, J. (2014) · The UNSW Canberra at ADFA Journal of Undergraduate Engineering Research

Effect of Elevated Temperature on Mechanical Properties of High-Volume Fly Ash-Based Geopolymer Concrete, Mortar and Paste Cured at Room Temperature

Zhao, J. S., Kang, W., Wang, S., Wang, Z., Yang, Z., Shumuye, E. D., & Gong, X. (2021) · Polymers · doi:10.3390/polym13091473 · Cited by 116

The Effect of High Temperature on Compression Strength of Geopolymer Paste

Bayuaji, R., Darmawan, S., Husin, N. A., Wibowo, B., Subekti, S., Ekaputri, J. J., Abdullah, M. M. A. B., & Biyanto, T. R. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/20179701020 · Cited by 2

Behavior of geopolymer concrete exposed to elevated temperatures

Joseph, B., & Mathew, G. (2015) · Dyuthi Digital Repository (Cochin University of Science and Technology) · Cited by 2