Effect of elevated temperatures on geopolymer paste, mortar and concrete

Properties of concrete

Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444

Geopolymer technology: The current state of the art

Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742

Geopolymers

Davidovits, J. (1991) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01912193 · Cited by 4,305

Alkali-activated fly ashes

Palomo, A., Grutzeck, M. W., & Blanco‐Varela, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,408

On the Development of Fly Ash-Based Geopolymer Concrete

Hardjito, D., Wallah, S. E., Sumajouw, D. M. J., & Rangan, B. V. (2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,256

Geopolymeric materials prepared using Class F fly ash and elevated temperature curing

Bakharev, T. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.031 · Cited by 953

Fire-resistant geopolymer produced by granulated blast furnace slag

Cheng, T., & Chiu, J. P. (2003) · Minerals Engineering · doi:10.1016/s0892-6875(03)00008-6 · Cited by 850

Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures

Kong, D., Sanjayan, J., & Sagoe‐Crentsil, K. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.021 · Cited by 809

The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applications

Jaarsveld, J. G. S. V., van Deventer, J. S. J., & Lorenzen, L. (1997) · Minerals Engineering · doi:10.1016/s0892-6875(97)00046-0 · Cited by 685

Damage behavior of geopolymer composites exposed to elevated temperatures

Kong, D., & Sanjayan, J. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.08.001 · Cited by 582

Fracture energy of ambient-cured fly ash-based geopolymer concrete

Mohyeddin, A., Karmokar, T., & Fardipour, M. (2025) · Australian Journal of Structural Engineering · doi:10.1080/13287982.2025.2535086 · Cited by 2

Thermal behaviour of blends kaolin-boehmite and metakaolin-boehmite based-geopolymers: physical and mechanical properties

Tiffo, E., Sabouang, C. J. N., Mouafon, M., Leussa, C. C. T., Pountouenchi, A., Tchakouté, H. K., Njoya, D., & Elimbi, A. (2025) · Open Ceramics · doi:10.1016/j.oceram.2025.100869 · Cited by 2

Pengaruh Pemanasan Terhadap Kuat Tekan Mortar Geopolimer Berbahan Dasar Abu Terbang Kelas C

Wardhono, A. (2019) · Publikasi Riset Orientasi Teknik Sipil (Proteksi) · doi:10.26740/proteksi.v1n1.p1-7 · Cited by 2

Mechanical Properties of Amorphous Metallic Fiber–Reinforced Geopolymer Composites

Shaikh, F. U. A., Singh, A. S. D., & Pandra, A. (2022) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0004182 · Cited by 2

Influence of matrix related parameters on strain hardening behavior of Engineered Geopolymer Composite (EGC)

Nematollahi, B., Sanjayan, J., & Shaikh, F. U. A. (2015) · Swinburne figshare (Swinburne University of Technology) · Cited by 2

Understanding the Mechanism of Decomposition Reactions of Neat and Superplasticized ordinary Portland Cement Pastes Using Thermal Analysis

Gad, E. A. M., Habib, A. O., & Mousa, M. M. (2017) · Epitoanyag-Journal of Silicate Based and Composite Materials · doi:10.14382/epitoanyag-jsbcm.2017.18 · Cited by 2

Evaluation of Creep Parameters in Geopolymers Derived From Mining Industry Waste

Huamán-Mamani, F. A., Gamarra-Delgado, J. F., Paredes-Paz, J. J., Bringas-Rodríguez, V. C., Mayta-Ponce, D. L., & Rodríguez-Guillén, G. P. (2020) · International Journal of Mining Materials and Metallurgical Engineering · doi:10.11159/ijmmme.2020.005 · Cited by 2

Utilization of Paper Sludge Ash in Lime Based Geopolymer Concrete: An Experimental Study

Palaniappan, M., Sutharsan, R., & Carmichael, M. J. (2021) · Lecture notes in civil engineering · doi:10.1007/978-3-030-80312-4_1 · Cited by 2

Properties of alkali-activated lightweight concrete

Top, S., Altıner, M., & Vapur, H. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85469-6.00022-2 · Cited by 2

Synthesis and mechanical characterization of geopolymeric mortars derived from inorganic industrial waste from Peruvian informal mining

Huamán-Mamani, F. A., Cuzziramos-Gutiérrez, F. A., Rodríguez-Guillén, G. P., Benavides-Salinas, M. L., Palomino-Ñaupa, C. K., & Gallegos-Florez, D. M. M. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.02.522 · Cited by 2

Recycling of Excavated Soils from Mini-Trenches Made on Road or Sidewalks to Install Public Utilities

Hussan, A., Levacher, D. R., Mezazigh, S., Nzabika, I., & DHERVILLY, P. (2022) · CivilEng · doi:10.3390/civileng3020014 · Cited by 2

Geopolymer Concrete Materials: An Overview of Their Mechanical Behavior

Singh, P., & Agrawal, A. (2022) · Journal of Futuristic Sciences and Applications · doi:10.51976/jfsa.512210 · Cited by 2

Development of High Volume Fly Ash and/ or Slag Modified Concrete and Geopolymer Concrete as Sustainable Construction Materials

Chowdhury, S. S. (2011) · doi:10.33915/etd.4705 · Cited by 2

Thermal Performance of Metakaolin‐Based Geopolymers: Volume Stability and Residual Mechanical Properties

Lahoti, M., Yang, E., & Tan, K. H. (2017) · Ceramic engineering and science proceedings · doi:10.1002/9781119321811.ch4 · Cited by 2

Mix Proportion and Mechanical Properties of One-Part Alkali-Activated Geopolymer ConcretePreprint

Pham, T.-T., Nguyen, N.-L., Nguyen, T.-T., Nguyen, T.-T., & Pham, T. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4168577 · Cited by 2

High Resistance Sintered Fly Ash/Kaolin (FA/CC) Ceramics

Panigrahi, M., Ganguly, R. I., & Dash, R. R. (2023) · doi:10.1002/9781394200405.ch4 · Cited by 2

Investigation of Geopolymer Concrete with Ceramic Waste as a Partial Replacement of Coarse Aggregate

Prabu, V. V., Velmurugan, S., & Deepak, O. P. (2021) · Springer Proceedings in Materials · doi:10.1007/978-981-15-8319-3_60 · Cited by 1

Mechanical Properties of Self-Compacting Geopolymer Concrete Using Fly Ash and GGBS

., S. T. (2018) · Asian Journal of Engineering and Applied Technology · doi:10.51983/ajeat-2018.7.1.889 · Cited by 1

Development of Waste-Based Alkali-Activated Cement Composites

Boros, A., Varga, C., Prajda, R., Jakab, M., & Korim, T. (2021) · Materials · doi:10.3390/ma14195815 · Cited by 1

Post-fire behavior of geopolymer concrete with sodium silicate waste as an alternative to conventional river sand

Kanagaraj, B., Anand, N., Alengaram, U. J., & Andrushia, A. D. (2023) · Journal of Structural Fire Engineering · doi:10.1108/jsfe-09-2023-0036 · Cited by 1

Unlocking the Detoxification of Phenanthrene from Water Using Alkali-Activated Slag Mortar

Tran, T. T., & Le, Q. T. N. (2024) · Applied Sciences · doi:10.3390/app14166991 · Cited by 1

Elements of Geopolymer Concrete

Poloju, K. K., & Srinivasu, K. (2025) · SpringerBriefs in applied sciences and technology · doi:10.1007/978-981-96-2479-9_2 · Cited by 1

Using response surface analysis for the optimization of mechanical strength and microstructure of geopolymers with different SiO2/Al2O3 and SiO2/Na2O ratios

Scolaro, L. M., Schackow, A., Folgueras, M. V., & Ueno, O. K. (2025) · Cerâmica · doi:10.1590/smws5780 · Cited by 1

Performance of self-compacting geopolymer concrete incorporating fly ash, Ground Granulated Blast Furnace Slag, and waste ceramic powder under exposure to high temperatures

Kumar, V., & Kumar, P. (2025) · Multiscale and Multidisciplinary Modeling Experiments and Design · doi:10.1007/s41939-025-00938-5 · Cited by 1

Properties of Metakaolin-Based Geopolymer Mortars Under Different Curing Conditions

Pereira, I., Oliveira, M. D. S., & de Lima, L. R. O. (2025) · Rilem bookseries · doi:10.1007/978-3-031-92874-1_54 · Cited by 1

Microstructural Characterization and Analysis of Hybrid Alkaline Mortars: Examining the Factors Influencing Fresh and Mechanical Characteristics

Mohapatra, A. K., & Pradhan, B. (2025) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-19408 · Cited by 1

Mechanical and durability properties of alkali-activated composites: a review and statistical inference on critical parameters

Abubakar, A. B., & Khushefati, W. H. (2025) · Innovative Infrastructure Solutions · doi:10.1007/s41062-025-02149-w · Cited by 1

Effect of calcium sulphoaluminate cement on the early strength of one-part fly ash/slag-based geopolymers

Zhou, Z., & Chen, B. (2025) · European Journal of Environmental and Civil engineering · doi:10.1080/19648189.2025.2542931 · Cited by 1

Evaluation of Geopolymer Concrete Exposed to Elevated Temperatures: A Review of Microstructure and Physical–Mechanical Characteristics

Philip, S., & Nidhi, M. (2025) · Springer eBooks · doi:10.1007/978-3-031-92801-7_19 · Cited by 1

New insights into heavy metal solidification mechanism based on sediment-GBFS-FA ternary geopolymer

Song, J., Zhang, H., Zhao, Y., Wan, L., Jiang, N., & Tao, H. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.114138 · Cited by 1

Tek Bileşenli Geopolimer Betonun Erken Yaş Basınç Dayanımına Farklı Kür Sıcaklıklarının Etkisi

Mazlum, T. Ö., & Atmaca, N. (2025) · Journal of Polytechnic · doi:10.2339/politeknik.1638100 · Cited by 1

Mechanical Properties of Cement Paste Samples with Partial Replacement of OPC by Sugarcane Bagasse Ash in Sri Lanka

Premathilaka, H. D. K. U., Kulasuriya, C., & Dayarathne, M. W. T. C. (2025) · Proceedings in Technology Transfer · doi:10.1007/978-981-95-2932-2_6 · Cited by 1

Performance of EPS-Modified Lightweight Geopolymer and Cement Mortars Under Different Thermal and Cooling Regimes: A Comparative Study

Ali, A. Y. F., Ismail, M. K., Ahmed, S. A., Youssef, P., & El-Feky, M. S. (2025) · Buildings · doi:10.3390/buildings15213991 · Cited by 1

Development of sustainable tail grout through the utilization of shield muck and waste-activated ground granulated blast furnace slag

Du, Y., Liu, W., Shi, P., & Li, W. (2025) · Waste Disposal & Sustainable Energy · doi:10.1007/s42768-025-00263-0 · Cited by 1

Insight into the improvement mechanism of high temperature resistance of ultra-high performance concrete incorporating waste glass powder: Experiment and simulation

Tian, W., Liu, X., Zhao, X., Lu, J., Chen, S., Cyr, M., Tagnit‐Hamou, A., & Poon, C. S. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.114693 · Cited by 1

Synthesis of high performance macromolecule geopolymer from complex brick waste mixture: correlation between microstructure, texture and mechanical behavior

Benbouziane, H., Merabtene, M., Kacimi, L., Cousture, A., & Kaci, A. (2025) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-025-02446-7 · Cited by 1

A Novel Geopolymer-Based Composite Material from Recycled Waste Glass

Premathilaka, K. K. W., Liyanapathirana, D. S., & Leo, C. J. (2025) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-20012 · Cited by 1

Fresh AAM Properties

Sun, Y., Dai, X., Sun, B., Rahul, A. V., Tao, Y., Yliniemi, J., Gao, M., Sha, W., Palacios, M., Puertas, F., et al. (2026) · RILEM state-of-the-art reports · doi:10.1007/978-3-032-07116-3_6 · Cited by 1

Durability of One-Part Alkali-Activated Binder Made with Alternative Sodium Silicate

Geraldo, R. H., Gonçalves, J. P., & Camarini, G. (2026) · Construction Materials · doi:10.3390/constrmater6010008 · Cited by 1

Thermal and mechanical properties of concrete containing different types of aggregates at elevated temperatures

Ali, A. E., Faried, A. S., & Osman, K. M. (2026) · Journal of Building Pathology and Rehabilitation · doi:10.1007/s41024-025-00769-4 · Cited by 1

Geopolymeric mortars through acid and basic activations formulated from slate mining waste

Francisco, N. T. A., da Silva, S. N., & da Silva, M. J. (2026) · Matéria (Rio de Janeiro) · doi:10.1590/1517-7076-rmat-2025-0370 · Cited by 1

Machine Learning Models with a GUI for Predicting Compressive Strength of Nano-Modified Concrete Exposed to High Temperatures

Dahish, H. A., & Alsuhaibani, E. (2026) · Buildings · doi:10.3390/buildings16112081 · Cited by 1

Toward Environmentally Sustainable Construction: Investigating the Effects of Aggregate Type and Curing Temperature on the Mechanical and Microstructural Properties of Fly-Ash-Based Geopolymer Mortar

İnal, A., Över, D., & Arıöz, E. (2026) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-026-14436-3 · Cited by 1

Performance-Based Comparison of UHPC and UHPGC Incorporating FA, GBFS, and MK Under Ambient and Elevated Temperatures

Amin, M., Heniegal, A. M. A., Zeyad, A. M., Agwa, I. S., & Fattouh, M. S. (2026) · Iranian Journal of Science and Technology Transactions of Civil Engineering · doi:10.1007/s40996-026-02209-w · Cited by 1

Impact of Na and K Activators on Properties of Class F and C Fly Ash‐Based Geopolymers

Yadollahi, M. M. (2026) · Journal of the American Ceramic Society · doi:10.1111/jace.70991 · Cited by 1

Mechanical and microstructural response of slag-sugarcane bagasse ash geopolymer fibrous concrete after elevated temperature exposure

Philip, S., Nidhi, M., Murali, G., & Rößler, C. (2026) · Journal of Building Engineering · doi:10.1016/j.jobe.2026.116890 · Cited by 1

Study on Residual Splitting Tensile Strength of HFCC after High Temperature

Fu, J., Cheng, Y. S., Sun, Y. B., Wang, Y. Y., & Sun, H. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.243-249.5067 · Cited by 1

Effect of Inorganic Admixture for Magnesia Cement Using MgCO3 and Serpentine

이, 종., & 소, 정. (2015) · Korean Journal of Materials Research · doi:10.3740/mrsk.2015.25.2.75 · Cited by 1

Strength and microstructure of class C fly ash based geopolymer activated with sodium silicate powder

Li, X., Zheng, E., Zhao, Y., & Ma, C. (2011) · International Conference on Consumer Electronics, Communications and Networks (CECNet) · doi:10.1109/cecnet.2011.5769265 · Cited by 1

Influence of drying temperature on compressive strength of geopolymer binder

Lam, N. N. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/869/3/032030 · Cited by 1

The ratio of alkali modulus in strength development of class c fly ash geopolymer mortar

Wardhono, A., Sabariman, B., Imaduddin, M. F., Sofianto, M. F., Hidajati, N. W., Prakoso, M. T. N., & Pradipta, A. H. (2021) · AIP conference proceedings · doi:10.1063/5.0072553 · Cited by 1

Elevated Temperature Resistance of Mortars Including Ground Granulated Blast Furnace Slag, Fly ash and Silica Fume

Öztürk, M. (2022) · Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi · doi:10.47495/okufbed.981513 · Cited by 2

Effect of Molarity of Potassium Hydroxide Solution on Heat Resistance of Fly Ash-Slag Based Geopolymer

Saludung, A., Azeyanagi, T., Ogawa, Y., & Kawai, K. (2022) · Lecture notes in civil engineering · doi:10.1007/978-981-19-3303-5_34 · Cited by 1

Geopolymer Concrete: A Sustainable Development and Its Field Applications

Gupta, J., & Aggarwal, V. (2022) · Lecture notes in civil engineering · doi:10.1007/978-981-19-5077-3_19 · Cited by 1

Utilization of E-Waste as Coarse Aggregates in Geopolymer Concrete

Verma, P., Dhurvey, P., & Gour, C. P. (2023) · Practice, progress, and proficiency in sustainability · doi:10.4018/978-1-6684-7573-7.ch012 · Cited by 1

The Effect of Material Ratios on Technical Properties in Fly Ash and Blast Furnace Slag Based Aluminum Chip Reinforced Geopolymer Mortars

Filazi, A., Yılmazel, R., & Pul, M. (2023) · International Conference on Pioneer and Innovative Studies · doi:10.59287/icpis.854 · Cited by 1

Influence of incorporating fine green foundry sand waste in the production of geopolymers: study of physical and mechanical properties

Lermen, R. T., Comparsi, T. D., Keller, J., Pilotto, T. L., Tiecher, F., Lisboa, C. P., & Silva, R. D. A. (2024) · Contribuciones a las Ciencias Sociales · doi:10.55905/revconv.17n.1-060 · Cited by 1

Workability and durability analysis of waste based geopolymer concrete

Agashua, L. O., Arum, C., Ayibiowu, B. D. O., & Ikumapayi, C. M. (2023) · SINERGI · doi:10.22441/sinergi.2024.1.020 · Cited by 1

Mechanism study of the effect of superplasticizers in alkali-activated materials containing sludge

Li, J., Kong, L., Sun, Y., Sun, S., Jiao, H., & Liu, Y. (2024) · Journal of Dispersion Science and Technology · doi:10.1080/01932691.2024.2339463 · Cited by 1

Mechanical and durability properties of sustainable geopolymer concrete

Assi, L. N., Alsalman, A., Kareem, R. S., Carter, K., & Khatib, J. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15672-4.00004-8 · Cited by 1

Application of Machine Learning in Prediction of Strength Properties of GGBS based Geopolymer Concrete

Baral, U., Singh, R. K., & Kumar, K. S. (2024) · Advances in computer science research · doi:10.2991/978-94-6463-471-6_61 · Cited by 1

The influences of cooling regimes on fire-damaged novel concrete

Noth, V. A., Loh, T. W., & Nguyen, K. T. Q. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-21620-6.00011-8 · Cited by 1

Investigation on Shear Strength of Fiber Reinforced GPC Exposed to Elevated Temperatures

Prasad, B. V., Balamurali, K., Anand, N., Arumairaj, P. D., Francis, A. J., Aaron, S. S., & Naser, M. Z. (2025) · Fire and Materials · doi:10.1002/fam.3290 · Cited by 1

Mesoscale modelling for investigating the thermo-mechanical behaviour of geopolymer concrete

Shi, F., Li, L.-Y., & Cheng, S. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112435 · Cited by 1

Geopolymer as well cement and variation of its mechanical properties under different curing temperature and curing mediums

Nasvi, M. C. M., Ranjith, P. G., & Sanjayan, J. (2013) · Cited by 1

The Mechanical Properties and Thermal Resistance of Fly Ash Geopolymer Foams

Hui-Teng, N., Heah, C. Y., Liew, Y. M., Abdullah, M. M. A. B., & Kamarudin, H. (2018) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/www.scientific.net/ssp.281.175 · Cited by 1

Thermal Resistance of Fly Ash Geopolymers with Alumina as Additive

Yong-Sing, N., Liew, Y. M., Heah, C. Y., Abdullah, M. M. A. B., & Kamarudin, H. (2018) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/www.scientific.net/ssp.281.182 · Cited by 1

Effect of Cooling Rate on the Performance of Fired Geopolymer Paste

Fouad, H. E. E., Soufi, W. H., Elmannaey, A. S., El-Aziz, M. A. A., & El-Ghazaly, H. A. (2017) · doi:10.17577/ijertv6is040123 · Cited by 1

The effect of concrete cover thickness subjected to elevated temperatures

Khiyon, M. I., Kadir, M. A. A., Sam, A. R. M., Hasanah, N., Mohamed, R. N., Yussof, M. M., Zukri, S. N. N. M., & Zuhan, N. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/620/1/012054 · Cited by 1

PERFORMANCE OF GEOPOLYMER MORTARS SUBJECTED TO ELEVATED TEMPERATURES

Albadawy, A., Elaty, M. A., & Taman, M. H. (2020) · Bulletin of the Faculty of Engineering Mansoura University · doi:10.21608/bfemu.2020.97655 · Cited by 1

Performance of hybrid waste fibrous materials in high strength concrete

Sivaraja, M., Poongodi, K., Jegan, M., Reddy, C. K. K., Krishnaraja, A. R., & Murthi, P. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/981/3/032059 · Cited by 1

Seasonal effect on compressive strength of ambient cured, nominal mix proportioned alkali-activated slag concrete

Ponnada, M. R., Lakshmi, V., & Kumar, K. S. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1025/1/012026 · Cited by 1

Mechanical Characterization of New Geopolymeric Materials Based on Mining Tailings and Rice Husk Ash

Huamán-Mamani, F. A., Mayta-Ponce, D. L., & Rodríguez-Guillén, G. P. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1054/1/012001 · Cited by 1

Utilization of Copper Mine Tailings as Road Construction Materials through Geopolymerization

Montaño, M., & Francisco, L. (2018) · Cited by 1

Strength and Durability Properties of Low-Calcium Fly Ash Based Geopolymer Concrete

Mehta, A., & Siddique, R. (2017) · Cited by 1

Influence of mix design and tailoring on thermal performance of geopolymers

Lahoti, M. (2018) · doi:10.32657/10356/73788 · Cited by 1

Effect of micro-encapsulated phase change materials on the mechanical properties of concrete

Pilehvar, S. (2018) · doi:10.31428/10317/7630 · Cited by 1

Cement-Based Concrete Modified with Vitellaria Paradoxa Ash: A Lifecycle AssessmentPreprint

Oyebisi, S. O., Alomayri, T. S., Owamah, H. I., & Olutoge, F. A. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4002321 · Cited by 1

High-temperature Stability of Ambient-cured One-part Alkali-activated Materials Incorporating Graphene for Thermal Energy StoragePreprint

Nghia, T., Nguyen, T. T., Black, J. R., & Ngo, T. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4733367 · Cited by 1

Combined recycled waste glass and hemp as aggregate replacement in geopolymer concrete

Rahman, M. (2024) · Queensland University of Technology · doi:10.5204/thesis.eprints.250820 · Cited by 1

Geopolymer concrete with FRP confinement

Lembo, K., Lokuge, W. P., & Karunasena, W. (2014) · University of Southern Queensland ePrints (University of Southern Queensland)

Evaluation of Magnesia Cement Using MgCO3 and Serpentine

이, 종., 소, 정., 추, 용., 송, 훈., & 박, 지. (2012) · Korean Journal of Materials Research · doi:10.3740/mrsk.2012.22.11.598

Effect of different activator combinations on the properties of fly ash based geopolymer

Nematollahi, B., Sanjayan, J., & Shaikh, F. U. A. (2014) · Swinburne figshare (Swinburne University of Technology)

EFFECT OF ACCELERATORS ON THE COMPRESSIVE STRENGTH DEVELOPMENT OF GEOPOLYMER CONCRETE COMPOSITES

Venkateswararao, J. (2016) · International Journal of Research in Engineering and Technology · doi:10.15623/ijret.2016.0526014

Physicochemical Properties of Ash‐Based Geopolymer Concrete

Sundaram, M. S., & Karthiyaini, S. (2017) · Handbook of Composites from Renewable Materials · doi:10.1002/9781119441632.ch59

Alkali ile Aktive Edilmiş Cüruf Harçlarının Yangın Direnci

Bilim, C. (2016) · Çukurova Üniversitesi Mühendislik Fakültesi Dergisi · doi:10.21605/cukurovaummfd.310124

STRESS-STRAIN RELATIONSHIP OF FIBRE REINFORCED CONCRETE EXPOSED UNDER ELEVATED TEMPERATURES

Jameran, A., & Ibrahim, I. S. (2017) · Malaysian Journal of Civil Engineering · doi:10.11113/mjce.v29.146

Enhancing the Strength of Volcanic Mud-based Class C Fly Ash Geopolymer Specimen by Limestone Inclusion

Wardhono, A., Estidarsani, N., & Hidajati, N. W. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/434/1/012198

Effect of elevated temperatures on alkali-activated tungsten mining waste based materials

Silva-Figueiredo, R., & Castro-Gomes, J. P. (2019) · MATEC Web of Conferences · doi:10.1051/matecconf/201927403001

Development and Study for the Conversion of Silo Ash Into Aggregate of Different Fraction

Uddin, Z., Padmakaran, P., & Saxena, A. (2019) · International Journal of Scientific Research in Science Engineering and Technology · doi:10.32628/ijsrset19647

DEVELOPMENT OF FLY-ASH BASED GEOPOLYMER FOR CORROSION RESISTANT COATING

Hussain, B. M. (2011)

The Importance of the Ultra-alkaline Volcanic Nature of the Raw Materials to the Ductility of Roman Marine ConcretePreprint

MacFarlane, J., Vanorio, T., & Monteiro, P. J. M. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2001.10974

Development of the cement replacement material from low quality fly ash

Vanhnaphet, S. (2020)

Characterization and Use of Biomass Power Plant Ash in Sulfoaluminate Cement Cementitious MaterialsPreprint

Ren, C., Xie, H., Zhao, B., Liu, S., & Zhu, D. (2021) · SSRN Electronic Journal · doi:10.2139/ssrn.3969621

Coupled Effects of Activator Type/Concentration and Curing Temperature on the Unconfined Compressive Strength of Alkali-Activated Slag-Based Cemented Paste BackfillPreprint

Jiang, H., Ren, L., Zhang, Q., Zheng, J., & Cui, L. (2021) · SSRN Electronic Journal · doi:10.2139/ssrn.3968956

Background

Low, I. M., Alomayri, T. S., & Assaedi, H. S. (2021) · Composites science and technology · doi:10.1007/978-981-16-2281-6_1

Study and Comparison of the Thermomechanical Response of Geopolymeric and Conventional Concretes

Huamán-Mamani, F. A., Gamarra-Delgado, J. F., Paredes-Paz, J. J., Bringas-Rodríguez, V. C., Mayta-Ponce, D. L., & Rodríguez-Guillén, G. P. (2020) · International Journal of Mining Materials and Metallurgical Engineering · doi:10.11159/ijmmme.2020.004

Valorization of siliceous wastes of alum industry as an additive for geopolymer cementPreprint

Abdullah, N. A., El-Sokkary, T. M., & Gharieb, M. (2022) · Research Square · doi:10.21203/rs.3.rs-1389979/v1

Strength Properties of Geopolymer Concrete with Ground Granulated Blast Furnace Slag and Metakaolin

(2019) · International Journal of Recent Technology and Engineering (IJRTE) · doi:10.35940/ijrte.d1016.1284s219

Investigation of Geopolymer Mortar and Concrete Under High Temperature

Mane, S., & Jadhav, H. S. (2014) · Cited by 37

Alkali Activated Class F-Fly Ash Based Geopolymer Concrete at Elevated Temperatures

Glover, J. (2014) · The UNSW Canberra at ADFA Journal of Undergraduate Engineering Research

Effect of Elevated Temperature on Mechanical Properties of High-Volume Fly Ash-Based Geopolymer Concrete, Mortar and Paste Cured at Room Temperature

Zhao, J. S., Kang, W., Wang, S., Wang, Z., Yang, Z., Shumuye, E. D., & Gong, X. (2021) · Polymers · doi:10.3390/polym13091473 · Cited by 116

The Effect of High Temperature on Compression Strength of Geopolymer Paste

Bayuaji, R., Darmawan, S., Husin, N. A., Wibowo, B., Subekti, S., Ekaputri, J. J., Abdullah, M. M. A. B., & Biyanto, T. R. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/20179701020 · Cited by 2

Behavior of geopolymer concrete exposed to elevated temperatures

Joseph, B., & Mathew, G. (2015) · Dyuthi Digital Repository (Cochin University of Science and Technology) · Cited by 2