Effect of elevated temperatures on geopolymer paste, mortar and concrete

Properties of concrete

Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444

Geopolymer technology: The current state of the art

Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742

Geopolymers

Davidovits, J. (1991) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01912193 · Cited by 4,305

Alkali-activated fly ashes

Palomo, A., Grutzeck, M. W., & Blanco‐Varela, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,408

On the Development of Fly Ash-Based Geopolymer Concrete

Hardjito, D., Wallah, S. E., Sumajouw, D. M. J., & Rangan, B. V. (2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,256

Geopolymeric materials prepared using Class F fly ash and elevated temperature curing

Bakharev, T. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.031 · Cited by 953

Fire-resistant geopolymer produced by granulated blast furnace slag

Cheng, T., & Chiu, J. P. (2003) · Minerals Engineering · doi:10.1016/s0892-6875(03)00008-6 · Cited by 850

Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures

Kong, D., Sanjayan, J., & Sagoe‐Crentsil, K. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.021 · Cited by 809

The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applications

Jaarsveld, J. G. S. V., van Deventer, J. S. J., & Lorenzen, L. (1997) · Minerals Engineering · doi:10.1016/s0892-6875(97)00046-0 · Cited by 685

Damage behavior of geopolymer composites exposed to elevated temperatures

Kong, D., & Sanjayan, J. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.08.001 · Cited by 582

Syntheses, Characterization and Binding Strength of Geopolymers: A Review

Olawale, M. D. (2013) · International Journal of Materials Science and Applications · doi:10.11648/j.ijmsa.20130206.14 · Cited by 44

Geopolymer-supported photocatalytic TiO2 film: Preparation and characterization

Chen, L., Zheng, K., & Liu, Y. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.06.097 · Cited by 44

Investigation on modulus of elasticity of fly ash-ground granulated blast furnace slag blended geopolymer concrete

Bellum, R. R., Muniraj, K., & Madduru, S. R. C. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.11.299 · Cited by 44

Shrinkage behavior of Portland and geopolymer cements at elevated temperature and pressure

Panchmatia, P., Olvera, R., Genedy, M., Juenger, M. C. G., & van Oort, E. (2020) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2020.107884 · Cited by 43

Using of recycled clay brick/fine soil to produce sodium hydroxide alkali activated mortars

Alzeebaree, R., Mawlod, A. O., Mohammedameen, A., & Niş, A. (2021) · Advances in Structural Engineering · doi:10.1177/13694332211015742 · Cited by 44

Effect of composition and curing on alkali activated fly ash-slag binders: Machine learning prediction with a random forest-genetic algorithm hybrid model

Zhang, M., Zhang, C., Zhang, J., Wang, L., & Wang, F. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129940 · Cited by 43

Effect of silica fume on the efflorescence, strength, and micro-properties of one-part geopolymer incorporating sewage sludge ash

Zhao, Q., Ma, C., Lu, X., Huang, B., Chen, Z., & Lian, C. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.136840 · Cited by 43

The potential for using geopolymer concrete in the UK

Heath, A. C., Paine, K. A., Goodhew, S., Ramage, M. H., & Lawrence, M. (2013) · Proceedings of the Institution of Civil Engineers - Construction Materials · doi:10.1680/coma.12.00030 · Cited by 43

Characterization of Alkali-Activated Nonwood Biomass Ash–Based Geopolymer Concrete

Matalkah, F., Soroushian, P., Balchandra, A., & Peyvandi, A. (2016) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001801 · Cited by 43

Compressive strength performance of geopolymer paste derived from Completely Decomposed Granite (CDG) and partial fly ash replacement

Dassekpo, J.-B. M., Zha, X., & Zhan, J. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.133 · Cited by 43

Effect of high temperature on the microstructural evolution of fiber reinforced geopolymer composite

Samal, S. M. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e01779 · Cited by 43

Hybrid alkali activated cements (HAACs) system: A state-of-the-art review on fresh, mechanical, and durability behaviour

Mohapatra, A. K., & Pradhan, B. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129636 · Cited by 42

Effect of Fly Ash characteristics, sodium-based alkaline activators, and process variables on the compressive strength of siliceous Fly Ash geopolymers with microstructural properties: A comprehensive review

Venkatesan, G., Alengaram, U. J., Ibrahim, S. B., & Ibrahim, M. S. I. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.136808 · Cited by 48

Effect of Elevated Temperatures on Compressive Strength, Ultrasonic Pulse Velocity, and Transfer Properties of Metakaolin-Based Geopolymer Mortars

Dandachy, M. E. E., Hassoun, L., El‐Mir, A., & Khatib, J. (2024) · Buildings · doi:10.3390/buildings14072126 · Cited by 42

Recent developments and fire design provisions for CFST columns and slim-floor beams

Romero, M. L., Espinós, A., Ferri, A. L., & Albero, V. (2020) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2020.106159 · Cited by 42

Fire-Exposed Fly-Ash-Based Geopolymer Concrete: Effects of Burning Temperature on Mechanical and Microstructural Properties

Razak, S. N. A., Shafiq, N., Guillaumat, L., Farhan, S. A., & Kumar, V. (2022) · Materials · doi:10.3390/ma15051884 · Cited by 41

An innovative approach to fly ash-based geopolymer concrete mix design: Utilizing 100 % recycled aggregates

Gopalakrishna, B., & Pasla, D. (2024) · Structures · doi:10.1016/j.istruc.2024.106819 · Cited by 41

XPS, 29Si, 27Al, 11B MAS -NMR, ATR-IR and FESEM characterization of geopolymer based on borax modified water glass activated Fly ash-GGBS blend

Revathi, T., & Jeyalakshmi, R. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab255e · Cited by 41

An Overview on the Influence of Various Factors on the Properties of Geopolymer Concrete Derived From Industrial Byproducts

Part, W. K., Ramli, M. B., & Cheah, C. B. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-804524-4.00011-7 · Cited by 41

Investigation on engineering properties and micro-structure characteristics of low strength and high strength geopolymer composites subjected to standard temperature exposure

Kanagaraj, B., Anand, N., Andrushia, A. D., & Lublóy, É. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01608 · Cited by 40

Microstructural and thermal characterization of polyethylene fiber-reinforced geopolymer composites

Raza, A., Ahmed, B., Ouni, M. H. E., Ghazouani, N., & Chen, W. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109904 · Cited by 40

Strength and Ultrasonic Characteristics of Alkali-Activated Fly Ash-Slag Geopolymer Concrete after Exposure to Elevated Temperatures

Ren, W., Xu, J., & Bai, E. (2015) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001406 · Cited by 40

Mineral-impregnated carbon-fiber (MCF) composites made with differently sized fly-ash geopolymers for durable light weight and high temperature applications

Zhao, J., Liebscher, M., Köberle, T., Almanla, A., & Mechtcherine, V. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.104950 · Cited by 39

Review of mechanical properties and strengthening mechanism of fully recycled aggregate concrete under high temperature

Zheng, Y., Xi, X., Zhang, Y., Zhang, P., & Du, C. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.132221 · Cited by 39

Effect of fly ash on compressive strength, carbonation and corrosion resistance of reinforced concrete: a systematic review

Gaikwad, P., & Sathe, S. (2023) · World Journal of Engineering · doi:10.1108/wje-07-2023-0240 · Cited by 48

Mechanical behavior and microscopic damage mechanism of hybrid fiber-reinforced geopolymer concrete at elevated temperature

Zhang, P., Feng, Z., Guo, J., Zheng, Y., & Yuan, P. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.10.238 · Cited by 39

Effects of elevated temperature on pumice based geopolymer composites

Yadollahi, M. M., Benli, A., & Demirboğa, R. (2015) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/1743289815y.0000000020 · Cited by 39

Optimizing Ternary-blended Geopolymers with Multi-response Surface Analysis

Promentilla, M. A. B., Thang, N. H., Kien, P. T., Hinode, H., Bacani, F. T., & Gallardo, S. M. (2016) · Waste and Biomass Valorization · doi:10.1007/s12649-016-9490-8 · Cited by 39

Characterisation and properties of geopolymer composite part 1: Role of mullite reinforcement

Wattanasiriwech, D., Nurgesang, F. A., Wattanasiriwech, D., & Timakul, P. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.06.166 · Cited by 39

Formulation and characterization of geopolymer and conventional lightweight green concrete by incorporating synthetic lightweight aggregate

Rehman, M. U., Rashid, K., Zafar, I., Alqahtani, F. K., & Khan, M. I. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101363 · Cited by 39

Enhancement of the properties of silicate activated ultrafine-slag based geopolymer mortar using retarder

Sinha, A. K., & Talukdar, S. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125380 · Cited by 39

Impact of micro characteristics on the formation of high-strength Class F fly ash-based geopolymers cured at ambient conditions

Ge, X., Hu, X., & Shi, C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129074 · Cited by 38

Effects of different supplementary cementitious materials on the performance and environment of eco-friendly mortar prepared from waste incineration bottom ash

Xu, F., Li, Z., Zhang, W., Jin, H., Chen, C., Liu, J., Xing, F., & Tang, L. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129277 · Cited by 38

Microstructural examination of concrete exposed to elevated temperature by using plane polarized transmitted light method

Akçaözoğlu, K. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.06.059 · Cited by 38

Salient parameters affecting the performance of foamed geopolymers as sustainable insulating materials

Degefu, D. M., Liao, Z., Berardi, U., & Doan, H. D. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125400 · Cited by 37

Effects of waste glass sand on the thermal behavior and strength of fly ash and GGBS based alkali activated mortar exposed to elevated temperature

Sasui̇, S., Kim, G.-Y., Nam, J., van Riessen, A., Hadzima-Nyarko, M., Choe, G., Suh, D., & Ji̇nwuth, W. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125864 · Cited by 38

Fabrication and characterization of metakaolin-based fiber reinforced fire resistant geopolymer

Akarken, G., & Cengiz, U. (2022) · Applied Clay Science · doi:10.1016/j.clay.2022.106786 · Cited by 38

Gradient power modified ohmic heating curing to prepare hybrid carbon fibers/high performance concrete under deep-freeze low temperature

Ouyang, M., Tian, W., Liu, Y., & Wang, W. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127279 · Cited by 37

Experimental and numerical investigation of bond behavior between geopolymer based ultra-high-performance concrete and steel bars

Yang, T., Xu, S., Liu, Z., Li, J., Wu, P., Yang, Y., & Wu, C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128220 · Cited by 37

A comparative study on spalling behaviors of alkali-activated ultra-high performance concrete (AAUHPC) and cement-based UHPC

Zhang, S., Yan, Z., Xu, G., Liu, X., Zhu, H., & Jiang, X. (2026) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2026.148084 · Cited by 37

Optimization of Alkaline Activator Mixing and Curing Conditions for A fly Ash-Based Geopolymer Paste System

Abdulkareem, O. A., & Ramli, M. B. (2015) · Modern Applied Science · doi:10.5539/mas.v9n12p61 · Cited by 37

Effects of slag content on the residual mechanical properties of ambient air-cured geopolymers exposed to elevated temperatures

Shaikh, F. U. A. (2018) · Journal of Asian Ceramic Societies · doi:10.1080/21870764.2018.1529013 · Cited by 37

Structural performance of ambient‐cured reinforced geopolymer concrete beams with steel fibres

Hassan, A., Arif, M., & Shariq, M. (2020) · Structural Concrete · doi:10.1002/suco.202000191 · Cited by 37

Effect of hydrogen peroxide and bagasse ash additions on thermal conductivity and thermal resistance of geopolymer foams

Pantongsuk, T., Kittisayarm, P., Muenglue, N., Benjawan, S., Thavorniti, P., Tippayasam, C., Nilpairach, S., Heness, G., & Chaysuwan, D. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102149 · Cited by 37

Investigation of Geopolymer Mortar and Concrete Under High Temperature

Mane, S., & Jadhav, H. S. (2014) · Cited by 37

Influence mechanism of curing temperature on geopolymerization reaction: A comprehensive review

Yu, Y., Xu, F., Wang, S., Fan, L., Zhang, J., Li, P., & Yu, L. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112195 · Cited by 36

Estudo comparativo da análise de ciclo de vida de concretos geopoliméricos e de concretos à base de cimento Portland composto (CP II)

Borges, P. H. R., Lourenço, T. M. D. F., Foureaux, A. F. S., & Pacheco, L. S. (2014) · Ambiente Construído · doi:10.1590/s1678-86212014000200011 · Cited by 36

In Situ Elevated Temperature Testing of Fly Ash Based Geopolymer Composites

Vickers, L., Pan, Z., Tao, Z., & van Riessen, A. (2016) · Materials · doi:10.3390/ma9060445 · Cited by 36

Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications

Nematollahi, B., Xia, M., & Sanjayan, J. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00160 · Cited by 36

Strength development of cemented tailings materials containing polycarboxylate ether-based superplasticizer: experimental results on the effect of time and temperature

Haruna, S., & Fall, M. (2020) · Canadian Journal of Civil Engineering · doi:10.1139/cjce-2019-0809 · Cited by 36

High-temperature performance of ambient-cured alkali-activated binder concrete

Ramagiri, K. K., Chauhan, D. R., Gupta, S., Kar, A., Adak, D., & Mukherjee, A. (2021) · Innovative Infrastructure Solutions · doi:10.1007/s41062-020-00448-y · Cited by 36

Process Development of Fly Ash-Based Geopolymer Mortars in View of the Mechanical Characteristics

Öz, H. Ö., Doğan-Sağlamtimur, N., Bilgil, A., Tamer, A., & Günaydın, K. (2021) · Materials · doi:10.3390/ma14112935 · Cited by 36

Pore gradation effect on Portland cement and geopolymer concretes

Negahban, E., Bagheri, A., & Sanjayan, J. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104141 · Cited by 36

Effect of addition of nanoclay and SBR latex on fly ash-slag geopolymer mortar

John, S. K., Nadir, Y., Cascardi, A., Arif, M. M., & Girija, K. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.105875 · Cited by 36

Mechanical and microstructural properties of just add water geopolymer cement comprised of Thermo-Mechanicalsynthesis Sediments-Fly ash mix

Mahfoud, E., Maherzi, W., Ndiaye, K., Benzerzour, M., Aggoun, S., & Abriak, N.-E. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.132626 · Cited by 36

Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes

Amiri, M., Aryanpour, M., & Porhonar, F. (2022) · High Temperature Materials and Processes · doi:10.1515/htmp-2022-0030 · Cited by 35

Investigation on residual bond strength and microstructure characteristics of fiber-reinforced geopolymer concrete at elevated temperature

Prasad, B. V., Anand, N., Kanagaraj, B., Kiran, T., Lublóy, É., Naser, M. Z., Arumairaj, P. D., & Andrushia, A. D. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02526 · Cited by 35

Damage Mechanism of Broad-narrow Joint of CRTSII Slab Track under Temperature Rise

Liu, X., Zhang, W., Xiao, J., Liu, X., & Li, W. (2019) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-019-0272-2 · Cited by 35

Strength and Microstructure of Palm Oil Fuel Ash–Fly Ash–Soft Soil Geopolymer Masonry Units

Sukmak, P., Kunchariyakun, K., Sukmak, G., Horpibulsuk, S., Kassawat, S., & Arulrajah, A. (2019) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002809 · Cited by 35

Predictive Model of Setting Times and Compressive Strengths for Low-Alkali, Ambient-Cured, Fly Ash/Slag-Based Geopolymers

Ukritnukun, S., Koshy, P., Rawal, A., Castel, A., & Sorrell, C. C. (2020) · Minerals · doi:10.3390/min10100920 · Cited by 35

Investigation into the influence of calcium compounds on the properties of micropore-foamed geopolymer

Hu, Y., Shao, Z., Wang, J., Zang, J., Tang, L., Ma, F., Qian, B., Ma, B., & Wang, L. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103521 · Cited by 35

Influence of superplasticizer on workability and strength of ambient cured alkali activated mortar

Paul, E. (2022) · Cleaner Materials · doi:10.1016/j.clema.2022.100152 · Cited by 35

Experimental investigation of heating–cooling effects on the mechanical properties of geopolymer-based high performance concrete heated to elevated temperatures

Liu, K., Liu, J., Li, J., Tao, M., & Wu, C. (2022) · Structures · doi:10.1016/j.istruc.2022.11.097 · Cited by 34

Influence of granite waste on mechanical and durability properties of fly ash-based geopolymer concrete

Saxena, R., Gupta, T., Sharma, A., & Panwar, N. L. (2021) · Environment Development and Sustainability · doi:10.1007/s10668-021-01414-z · Cited by 34

Effect of elevated temperature on polypropylene fiber reinforced alkali-activated high calcium fly ash paste

Chindaprasirt, P., Boonbamrung, T., Poolsong, A., & Kroehong, W. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00554 · Cited by 34

The performance of micropore-foamed geopolymers produced from industrial wastes

Shao, Z., Wang, J., Jiang, Y., Zang, J., Tie-jun, W., Ma, F., Qian, B., Wang, L., Hu, Y., & Ma, B. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124636 · Cited by 34

Efficacy of Available Superplasticizers on Geopolymers

Nematollahi, B., & Sanjayan, J. (2014) · Research Journal of Applied Sciences Engineering and Technology · doi:10.19026/rjaset.7.420 · Cited by 34

Experimental Study of GFRP-Reinforced Geopolymer Concrete Columns under Different Loading Conditions

Hadi, M. N. S., Ali, S., & Sheikh, M. N. (2021) · Journal of Composites for Construction · doi:10.1061/(asce)cc.1943-5614.0001164 · Cited by 35

Mechanical and micro‐characterization of alkali‐activated concrete under high‐temperature exposure

Pratap, B., Paswan, R. K., & Kumar, P. (2024) · Structural Concrete · doi:10.1002/suco.202301157 · Cited by 33

Shear Behavior of Geopolymer Concrete Beams Reinforced with Glass Fiber-Reinforced Polymer Bars

Maranan, G. B., Manalo, A. C., Benmokrane, B., Karunasena, W., & Mendis, P. A. (2016) · ACI Structural Journal · doi:10.14359/51689150 · Cited by 33

Physical and mechanical properties of unheated and heated kaolin based-geopolymers with partial replacement of aluminium hydroxide

Tiffo, E., Mbah, J. B. B., Belibi, P. D. B., Djobo, J. N. Y., & Elimbi, A. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122103 · Cited by 33

A comprehensive review of metakaolin-based ultra-high-performance geopolymer concrete enhanced with waste material additives

Metwally, G. A. M., Elemam, W. E., Mahdy, M., & Ghannam, M. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112019 · Cited by 32

Thermal stability of geopolymers used as supporting materials for TiO2 film coating through sol-gel process: Feasibility and improvement

Zheng, K., Chen, L., & Gbozee, M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.007 · Cited by 32

Formulation of sludge incineration residue based geopolymer and stabilization performance on potential toxic elements

Sun, S., Lin, J., Fang, L., Ma, R., Ding, Z., Zhang, X., Zhao, X., & Liu, Y. (2018) · Waste Management · doi:10.1016/j.wasman.2018.04.022 · Cited by 32

The effect of activator ratio on the thermal and hygric properties of aerated geopolymers

Degefu, D. M., Liao, Z., Berardi, U., & Labbé, G. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103414 · Cited by 31

The role of chemistry and fineness of metakaolin on the fresh properties and heat resistance of blended fly ash-based geopolymer

Abbass, A. M., Firdous, R., Djobo, J. N. Y., Stephan, D. A., & Elrahman, M. A. (2023) · SN Applied Sciences · doi:10.1007/s42452-023-05359-y · Cited by 31

Experimental Investigations and Prediction of Thermal Behaviour of Ferrosialate-Based Geopolymer Mortars

Yeddula, B. S. R., & Karthiyaini, S. (2020) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-019-04314-7 · Cited by 31

Performance of cementitious and slag-fly ash blended geopolymer screed composites: A comparative study

Hwalla, J., El-Hassan, H., Assaad, J. J., & El‐Maaddawy, T. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02037 · Cited by 31

Scientometric Analysis of Global Research on the Utilization of Geopolymer Composites in Construction Applications

Hwalla, J., Bawab, J., El-Hassan, H., Obaida, F. A., & El‐Maaddawy, T. (2023) · Sustainability · doi:10.3390/su151411340 · Cited by 30

Effect of GGBS Content and Water/Geopolymer Solid Ratio on the Mechanical, Elevated Temperature Resistance, and Sorptivity Properties of FA/GGBS-Based Geopolymer Concrete

Yilmazoglu, A., Yıldırım, S. T., Yıldız, S., & Behçet, Ö. F. (2024) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-17167 · Cited by 30

Compressive strength prediction and feature analysis for GGBS-Based geopolymer concrete using optimized XGBoost and SHAP: A comparative study of optimization algorithms and experimental validation

Philip, S., & Nidhi, M. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112879 · Cited by 36

Prediction of geopolymer concrete compressive strength using artificial neural network and genetic algorithm

Khosravi, H., & Bahram, M. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.105537 · Cited by 30

Predicting compressive strength of geopolymer concrete using NDT techniques

Sreenivasulu, C., Jawahar, J. G., & Sashidhar, C. (2018) · Asian Journal of Civil Engineering · doi:10.1007/s42107-018-0036-1 · Cited by 30

Durability Properties of Geopolymer Mortars Containing Slag

Bingöl, Ş., Bilim, C., Atiş, C. D., & Durak, U. (2020) · Iranian Journal of Science and Technology Transactions of Civil Engineering · doi:10.1007/s40996-019-00337-0 · Cited by 30

STRENGTH AND DURABILITY PERFORMANCE OF FLY ASH BASED GEOPOLYMER CONCRETE USING NANO SILICA

Vyas, S., Mohammad, S., Pal, S., & Singh, N. S. (2020) · International Journal of Engineering Science Technologies · doi:10.29121/ijoest.v4.i2.2020.73 · Cited by 30

Phase and dimensional stability of volcanic ash-based phosphate inorganic polymers at elevated temperatures

Djobo, J. N. Y., Elimbi, A., & Stephan, D. A. (2020) · SN Applied Sciences · doi:10.1007/s42452-020-2616-4 · Cited by 30

Durability studies in alkaline activated systems (metakaolin – bottom ash): A prospective study

Kumar, M. L., & Revathi, V. (2021) · Boletín de la Sociedad Española de Cerámica y Vidrio · doi:10.1016/j.bsecv.2021.09.004 · Cited by 30

Cement mortar containing crumb rubber coated with geopolymer: From microstructural properties to compressive strength

Liu, J., & Tran, P. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131284 · Cited by 30

Investigating the possibility of utilization of kaolin and the potential of metakaolin to produce green cement for construction purposes-A review

Kamarudin, H., Yun-Ming, L., Abdullah, M. M. A. B., Musa, L., Ismail, K. N., & Cheng-Yong, H. (2011) · Cited by 30

High Temperature Degradation Mechanism of Concrete with Plastering Layer

Liu, C., & Chen, J. (2022) · Materials · doi:10.3390/ma15020398 · Cited by 29

Mechanical properties and life cycle assessment of sugarcane bagasse and corn cob ashes‐based geopolymer concrete to promote circular economy

Umer, M., Ahmad, J., Abdullah, M. S., Khan, H. A., Ali, S., & Younas, M. U. (2023) · Structural Concrete · doi:10.1002/suco.202300119 · Cited by 29

Mechanical Framework for Geopolymer Gels Construction: An Optimized LSTM Technique to Predict Compressive Strength of Fly Ash-Based Geopolymer Gels Concrete

Shi, X., Chen, S., Wang, Q., Lu, Y., Ren, S., & Huang, J. (2024) · Gels · doi:10.3390/gels10020148 · Cited by 33

Advanced materials for concrete-filled tubular columns and connections

Espinós, A., Romero, M. L., Pascual, A. M. J., & Albero, V. (2015) · Structures · doi:10.1016/j.istruc.2015.08.006 · Cited by 29

Study and predicting the stress-strain characteristics of geopolymer concrete under compression

Sreenivasulu, C., Jawahar, J. G., & Chundupalli, S. (2018) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2018.01.010 · Cited by 29

Improving the rheological properties of alkali-activated geopolymers using non-aqueous fluids for well cementing and lost circulation control purposes

Liu, X., Nair, S. D., Aughenbaugh, K. L., Juenger, M. C. G., & van Oort, E. (2020) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2020.107555 · Cited by 29

Multi-scale imaging, strength and permeability measurements: Understanding the durability of Roman marine concrete

MacFarlane, J., Vanorio, T., & Monteiro, P. J. M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121812 · Cited by 33

Performance evaluation of fly ash and ground granulated blast furnace slag‐based geopolymer concrete: A comparative study

Yilmazoglu, A., Yıldırım, S. T., Behçet, Ö. F., & Yıldız, S. (2022) · Structural Concrete · doi:10.1002/suco.202100835 · Cited by 29

High-strength geopolymer concrete based on coal washing waste

Moradikhou, A. B., Safehian, M., & Golafshani, E. M. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129675 · Cited by 29

Experimental study of high-temperature resistance of alkali-activated slag crushed aggregate mortar

Huang, W., Wang, Y., Zhang, Y., & Zheng, W. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.02.072 · Cited by 29

Investigation on the impact of elevated temperature on sustainable geopolymer composite

Verma, M., Meena, R. K., Singh, I., Gupta, N., Saxena, K. K., Reddy, M. M., Salem, K. H., & Salmaan, N. U. (2023) · Advances in Mechanical Engineering · doi:10.1177/16878132231196402 · Cited by 29

Investigation of Geopolymer Mortar and Concrete Under High Temperature

Mane, S., & Jadhav, H. S. (2014) · Cited by 37

Alkali Activated Class F-Fly Ash Based Geopolymer Concrete at Elevated Temperatures

Glover, J. (2014) · The UNSW Canberra at ADFA Journal of Undergraduate Engineering Research

Effect of Elevated Temperature on Mechanical Properties of High-Volume Fly Ash-Based Geopolymer Concrete, Mortar and Paste Cured at Room Temperature

Zhao, J. S., Kang, W., Wang, S., Wang, Z., Yang, Z., Shumuye, E. D., & Gong, X. (2021) · Polymers · doi:10.3390/polym13091473 · Cited by 116

The Effect of High Temperature on Compression Strength of Geopolymer Paste

Bayuaji, R., Darmawan, S., Husin, N. A., Wibowo, B., Subekti, S., Ekaputri, J. J., Abdullah, M. M. A. B., & Biyanto, T. R. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/20179701020 · Cited by 2

Behavior of geopolymer concrete exposed to elevated temperatures

Joseph, B., & Mathew, G. (2015) · Dyuthi Digital Repository (Cochin University of Science and Technology) · Cited by 2