The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Toward an indexing approach to evaluate fly ashes for geopolymer manufacture
Abstract
Variations between fly ashes can lead to significant differences in the geopolymers derived from them, in both microstructural and mechanical properties. This study assesses the effect of physical, crystallographic and chemical characteristics of fly ash on geopolymerisation performance and the strength of the resulting binders. Physical and glass chemistry factors are combined to develop a comprehensive index to evaluate the suitability of fly ashes for the production of high-strength geopolymers. An equation for this index is proposed, developed using five typical low-calcium fly ashes and then validated against a further eight literature datasets, showing a good relationship between the ranking order of the calculated index and the compressive strengths of geopolymer pastes produced with comparable activator and paste workability. This index can be used to screen the source materials, which is of significant value in moving alkali activated cements towards acceptance in practice.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The characterisation of source materials in fly ash-based geopolymers
van Jaarsveld, J. G. S., van Deventer, J. S. J., & Lukey, G. C. (2003) · Materials Letters · doi:10.1016/s0167-577x(02)00971-0 · Cited by 416
Rickard, W. D. A., Williams, R., Temuujin, J., & van Riessen, A. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.01.005 · Cited by 243
Determination of the reactive component of fly ashes for geopolymer production using XRF and XRD
Williams, R. P., & van Riessen, A. (2010) · Fuel · doi:10.1016/j.fuel.2010.07.031 · Cited by 200
Beneficiation of Collie fly ash for synthesis of geopolymer: Part 1 – Beneficiation
van Riessen, A., & Chen-Tan, N. (2013) · Fuel · doi:10.1016/j.fuel.2012.11.070 · Cited by 35
Cited by
Akhtar, A., & Sarmah, A. K. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.085 · Cited by 1,250
Clean production and properties of geopolymer concrete; A review
Amran, Y. H. M., Alyousef, R., Alabduljabbar, H., & El-Zeadani, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119679 · Cited by 901
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationde Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
Yang, T., Zhu, H., Zhang, Z., Gao, X., Zhang, C., & Wu, Q. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.008 · Cited by 399
Self-citation
Metadata
- Authors
- Zhang, Z., Provis, J. L., Zou, J., Reid, A., & Wang, H.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2016-07
- Volume
- 85
- Pages
- 163-173
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2343785022
- Cited by
- 161
- References
- 4
- FWCI
- 16.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.