The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Metakaolin and fly ash alkali-activated mortars compared with cementitious mortars at the same strength class
Open accessAbstract
Abstract Alkali-activated and cementitious mortars belonging to R1 ≥ 10 MPa, R2 ≥ 15 MPa and R3 ≥ 25 MPa strength classes were tested and compared in terms of workability, dynamic modulus of elasticity, porosimetry, and water vapor permeability. Capillary water absorption, drying shrinkage, resistance to sulfate attack, and corrosion behavior of embedded bare and galvanized reinforcements were also investigated. In alkali-activated mortars, drying shrinkage is higher than that of cementitious mortars but restrained shrinkage is lower due to lower modulus of elasticity. Pore dimensions affect water vapor permeability, more pronounced in alkali-activated mortars, and capillary water absorption, much lower in fly ash ones. The high alkalinity of fly ash and metakaolin mortars delayed the achievement of the passive state in particular for the galvanized reinforcements but after 1 month of curing they reached the same corrosion rates of those embedded in cementitious mortars.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization
Sindhunata, van Deventer, J. S. J., Lukey, G. C., & Xu, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051251p · Cited by 390
Cited by
Drying shrinkage in alkali-activated binders – A critical review
Mastali, M., Kinnunen, P., Dalvand, A., Mohammadi Firouz, R., & Illikainen, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.125 · Cited by 468
Durability of alkali-activated materials in aggressive environments: A review on recent studies
Zhang, J., Shi, C., Zhang, Z., & Ou, Z. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.027 · Cited by 374
Properties and characterization of green one-part geopolymer activated by composite activators
Ma, C., Zhao, B., Guo, S., Long, G., & Xie, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.159 · Cited by 273
Metadata
- Authors
- Mobili, A., Belli, A., Giosuè, C., Bellezze, T., & Tittarelli, F.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2016-10
- Volume
- 88
- Pages
- 198-210
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2497045014
- Cited by
- 175
- References
- 1
- FWCI
- 28.09
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.