The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Chloride-induced corrosion of steel rebars in simulated pore solutions of alkali-activated concretes
Open accessAbstract
The passivation and chloride-induced depassivation of steel rebars immersed in varying alkaline environments (0.80 M, 1.12 M and 1.36 M NaOH solutions), simulating the pore solutions of low-Ca alkali-activated concretes, were investigated using a range of electrochemical techniques. The passive film on the steel rebars was complex in chemical makeup, composed of Fe–hydroxides, oxy-hydroxides and oxides. An increased degree of passivation of the rebars was observed when exposed to solutions with higher hydroxide concentrations. The critical chloride level ([Cl − ]/[OH − ] ratio) required to induce depassivation of steel was strongly dependent on the alkalinity of the pore solution, and was found to be 0.90, 1.70 and 2.40 for 0.80 M, 1.12 M and 1.36 M NaOH solutions, respectively. These values all correspond to a constant value of [Cl − ]/[OH − ] 3 = 1.25, which is a novel relationship to predict the onset of pitting, interlinking chloride concentration and the solubility of the passive film.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1986) · Springer eBooks · doi:10.1007/978-3-642-71010-0 · Cited by 2,123
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Self-citationImpedance spectroscopy: Emphasizing solid materials and systems
Hollins, P. (1988) · Spectrochimica Acta Part A: Molecular Spectroscopy · doi:10.1016/0584-8539(88)80155-7 · Cited by 1,583
Critical chloride content in reinforced concrete — A review
Angst, U., Elsener, B., Larsen, C. K., & Vennesland, Ø. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.08.006 · Cited by 1,420
Geopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Self-citationA Point Defect Model for Anodic Passive Films: II . Chemical Breakdown and Pit Initiation
Lin, L. F., Chao, C. Y., & Macdonald, D. D. (1981) · Journal of The Electrochemical Society · doi:10.1149/1.2127592 · Cited by 664
The presentation of the chloride threshold level for corrosion of steel in concrete
Glass, G. K., & Buenfeld, N. R. (1997) · Corrosion Science · doi:10.1016/s0010-938x(97)00009-7 · Cited by 573
The pore solution of blended cements: a review
Vollpracht, A., Lothenbach, B., Snellings, R., & Haufe, J. (2016) · Materials and Structures · doi:10.1617/s11527-015-0724-1 · Cited by 568
van Deventer, J. S. J., Provis, J. L., Duxson, P., & Brice, D. G. (2010) · Waste and Biomass Valorization · doi:10.1007/s12649-010-9015-9 · Cited by 494
Self-citationSurface Electrochemistry: A Molecular Level Approach
Bockris, J. O., & Khan, S. U. M. (1993) · CERN Document Server (European Organization for Nuclear Research) · Cited by 492
Effect of Alkali Cations on Aluminum Incorporation in Geopolymeric Gels
Duxson, P., Lukey, G. C., Separovic, F., & van Deventer, J. S. J. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0494216 · Cited by 470
Pore solution composition and alkali diffusion in inorganic polymer cement
Lloyd, R. R., Provis, J. L., & van Deventer, J. S. J. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.04.008 · Cited by 355
Self-citationLocalised dissolution kinetics, salt films and pitting potentials
Laycock, N. J., & Newman, R. C. (1997) · Corrosion Science · doi:10.1016/s0010-938x(97)00049-8 · Cited by 353
Corrosion and Corrosion Inhibition of Reinforcing Steel: I. Immersed in Alkaline Solutions
Gouda, V. K. (1970) · British Corrosion Journal · doi:10.1179/000705970798324450 · Cited by 345
Mechanism and equivalent circuits in electrochemical impedance spectroscopy
Harrington, D. A., & van den Driessche, P. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.01.067 · Cited by 314
A thermodynamic model for C-(N-)A-S-H gel: CNASH_ss. Derivation and validation
Myers, R. J., Bernal, S. A., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.07.005 · Cited by 312
Self-citationReinforcing steel passivation in mortar and pore solution
Poursaee, A., & Hansson, C. M. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.04.005 · Cited by 300
Chloride Corrosion Threshold of Reinforcing Steel in Alkaline Solutions—Open-Circuit Immersion Tests
Li, L., & Sagüés, A. A. (2001) · CORROSION · doi:10.5006/1.3290325 · Cited by 278
Williamson, J., & Isgor, O. B. (2016) · Corrosion Science · doi:10.1016/j.corsci.2016.01.027 · Cited by 274
Joiret, S., Keddam, M., Nóvoa, X. R., Pérez, M. C., Rangel, C., & Takenouti, H. (2002) · Cement and Concrete Composites · doi:10.1016/s0958-9465(01)00022-1 · Cited by 273
Angst, U. M., Elsener, B., Larsen, C. K., & Vennesland, Ø. (2011) · Corrosion Science · doi:10.1016/j.corsci.2011.01.025 · Cited by 261
Corrosion resistance in activated fly ash mortars
Miranda, J. M., Fernández-Jiménez, A., González, J. A., & Palomo, A. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.07.030 · Cited by 195
The participation of bound chloride in passive film breakdown on steel in concrete
Glass, G. K., Reddy, B., & Buenfeld, N. R. (2000) · Corrosion Science · doi:10.1016/s0010-938x(00)00040-8 · Cited by 189
Ghods, P., Isgor, O. B., McRae, G. A., & Gu, G. P. (2010) · Corrosion Science · doi:10.1016/j.corsci.2010.02.016 · Cited by 189
Synthetic concrete pore solution chemistry and rebar corrosion rate in the presence of chlorides
Goñi, S., & Andrade, C. (1990) · Cement and Concrete Research · doi:10.1016/0008-8846(90)90097-h · Cited by 189
A study on the passive state stability of steel embedded in activated fly ash mortars
Bastidas, D. M., Fernández‐Jiménez, A., Palomo, A., & González, J. A. V. (2008) · Corrosion Science · doi:10.1016/j.corsci.2007.11.016 · Cited by 170
Monticelli, C., Natali, M. E., Balbo, A., Chiavari, C., Zanotto, F., Manzi, S., & Bignozzi, M. C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.11.001 · Cited by 130
Corrosion and Corrosion Inhibition of Reinforcing Steel: II. Embedded In Concrete
Gouda, V. K., & Halaka, W. Y. (1970) · British Corrosion Journal · doi:10.1179/000705970798324478 · Cited by 119
The Electrochemistry of Iron in lM Lithium Hydroxide Solution at 22° and 200°C
Macdonald, D. D., & Owen, D. G. (1973) · Journal of The Electrochemical Society · doi:10.1149/1.2403446 · Cited by 118
Pourbaix, M. (1990) · Corrosion Science · doi:10.1016/0010-938x(90)90205-j · Cited by 115
Corrosion behaviour of a new low-nickel stainless steel embedded in activated fly ash mortars
Criado, M., Bastidas, D. M., Fajardo, S., Fernández‐Jiménez, A., & Bastidas, J. M. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.03.014 · Cited by 102
Self-citationThe C1−/OH− ratio in chloride-contaminated concrete — a most important criterion
Kayyali, O. A., & Haque, M. N. (1995) · Magazine of Concrete Research · doi:10.1680/macr.1995.47.172.235 · Cited by 99
Burke, L. D., & Lyons, M. E. G. (1986) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(86)90010-0 · Cited by 91
The inhibitive effects of electrochemical treatment applied to steel in concrete
Glass, G. K., & Buenfeld, N. R. (2000) · Corrosion Science · doi:10.1016/s0010-938x(99)00121-3 · Cited by 70
The breakdown of passive films on iron
BIRD, H. E. H., Pearson, B. R., & Brook, P. A. (1988) · Corrosion Science · doi:10.1016/0010-938x(88)90009-1 · Cited by 50
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationPore solution composition of alkali-activated slag/fly ash pastes
Zuo, Y., Nedeljković, M., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.10.010 · Cited by 274
Slag-Based Cements That Resist Damage Induced by Carbon Dioxide
Ke, X., Criado, M., Provis, J. L., & Bernal, S. A. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04730 · Cited by 62
Self-citation
Metadata
- Authors
- Mundra, S., Criado, M., Bernal, S. A., & Provis, J. L.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2017-10
- Volume
- 100
- Pages
- 385-397
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2750163624
- Cited by
- 254
- References
- 35
- FWCI
- 19.98
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.