The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Carbon dioxide reduction potential in the global cement industry by 2050
Abstract
This paper, which is a contribution to the UNEP series on Eco-Efficient Cements, examines the role of material-based solutions to reducing CO 2 emissions from cement production considering factors that could influence implementation. Global urbanization has led to an increase in demand for cement and cement-based materials. With its growth in consumption, the associated CO 2 emissions from its production are raising concern. However, the role of mitigation strategies in a global context that account for regional material availability and degree of market adoption have yet to be considered. This work shows that the 2 °C scenario targets for 2050 can be met through increased use of calcined clay and engineered filler with dispersants. The introduction of new Portland clinker-based cement alternatives, use of alkali-activated materials, and improvement of efficiency of cement use could further contribute to reduction goals. There are currently-available technologies for reduction that could be rapidly implemented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Sustainable cement production—present and future
Schneider, M., Romer, M., Tschudin, M., & Bolio, H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.019 · Cited by 1,643
Huntzinger, D. N., & Eatmon, T. D. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.04.007 · Cited by 1,392
Sustainable development and climate change initiatives
Damtoft, J. S., Lukasik, J., Herfort, D., Sorrentino, D., & Gartner, E. M. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.09.008 · Cited by 1,094
Good practice guidance and uncertainty management in national greenhouse gas inventories
Penman, J. M., Kruger, D., Galbally, I. E., Hiraishi, T., Nyenzi, B. S., Emmanuel, S., Buendia, L. V., Hoppaus, R., Martinsen, T., Meijer, J., et al. (2000) · Cited by 1,020
Green house gas emissions due to concrete manufacture
Flower, D. J. M., & Sanjayan, J. G. (2007) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.05.327 · Cited by 912
Measuring the eco-efficiency of cement use
Damineli, B. L., Kemeid, F. M., Aguiar, P. S., & John, V. M. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.07.009 · Cited by 776
Self-citationMiller, S. A., Horvath, A., & Monteiro, P. J. M. (2016) · Environmental Research Letters · doi:10.1088/1748-9326/11/7/074029 · Cited by 589
Self-citationGartner, E., & Sui, T. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.002 · Cited by 580
Tracking Industrial Energy Efficiency and CO2 Emissions
International Energy Agency (2007) · OECD eBooks · doi:10.1787/9789264030404-en · Cited by 553
Celik, K., Meral, C., Petek Gursel, A., Mehta, P. K., Horvath, A., & Monteiro, P. J. M. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.11.003 · Cited by 463
Self-citationMaterial Waste in Building Industry: Main Causes and Prevention
Formoso, C. T., Soibelman, L., De Cesare, C., & Isatto, E. L. (2002) · Journal of Construction Engineering and Management · doi:10.1061/(asce)0733-9364(2002)128:4(316 · Cited by 434
Concrete: An eco material that needs to be improved
Flatt, R. J., Roussel, N., & Cheeseman, C. R. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.11.012 · Cited by 392
Assessing the environmental and economic potential of Limestone Calcined Clay Cement in Cuba
Sánchez Berriel, S., Favier, A., Rosa Domínguez, E., Sánchez Machado, I. R., Heierli, U., Scrivener, K., Martirena Hernández, F., & Habert, G. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.125 · Cited by 335
Recent update on the environmental impact of geopolymers
Habert, G., & Ouellet-Plamondon, C. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.6 · Cited by 330
Gursel, A. P., Maryman, H., & Ostertag, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.029 · Cited by 320
Cement production technology improvement compared to factor 4 objectives
Habert, G., Billard, C., Rossi, P., Chen, C., & Roussel, N. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.09.031 · Cited by 313
Collins, F. (2010) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-010-0191-4 · Cited by 302
Cement Technology Roadmap: Carbon Emissions Reductions up to 2050
International Energy Agency (2009) · IEA Technology Roadmaps · doi:10.1787/9789264088061-en · Cited by 242
Identifying Improvement Potentials in Cement Production with Life Cycle Assessment
Boesch, M. E., & Hellweg, S. (2010) · Environmental Science & Technology · doi:10.1021/es100771k · Cited by 198
Energy Technology Perspectives 2016: Towards Sustainable Urban Energy Systems
Poponi, D., Bryant, T., Burnard, K., et al. (2016) · Cited by 183
Guinée, J. B., & Heijungs, R. (1995) · Environmental Toxicology and Chemistry · doi:10.1002/etc.5620140525 · Cited by 168
Embodied carbon dioxide in concrete: Variation with common mix design parameters
Purnell, P., & Black, L. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.02.005 · Cited by 144
12th International Congress on the Chemistry of Cement
(2005) · Advances in Cement Research · doi:10.1680/adcr.17.2.90.65043 · Cited by 127
Infrastructure and the Environment
Doyle, M. W., & Havlick, D. G. (2009) · Annual Review of Environment and Resources · doi:10.1146/annurev.environ.022108.180216 · Cited by 124
Calculating CO2 Uptake for Existing Concrete Structures during and after Service Life
Andersson, R., Fridh, K., Stripple, H., & Häglund, M. (2013) · Environmental Science & Technology · doi:10.1021/es401775w · Cited by 118
Cheung, J., Roberts, L. R., & Liu, J. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.04.011 · Cited by 94
Concrete mixture proportioning for desired strength and reduced global warming potential
Miller, S. A., Monteiro, P. J. M., Ostertag, C. P., & Horvath, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.10.081 · Cited by 91
Self-citationMiller, S. A., Monteiro, P. J. M., Ostertag, C. P., & Horvath, A. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.02.002 · Cited by 79
Self-citationMiller, S. A., Horvath, A., Monteiro, P. J. M., & Ostertag, C. P. (2015) · Environmental Research Letters · doi:10.1088/1748-9326/10/11/114017 · Cited by 72
Self-citationMiller, S. A., Srubar, W. V., Billington, S. L., & Lepech, M. D. (2015) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2015.04.004 · Cited by 67
Self-citation
Research works printed but not linked: 7
- Scrivener, K., F. Martirena, S. Bishnoi, and S. Maity, Calcined clays as supplementary cementitious materials. Cem. Concr. Res. (under review).
- John, V.M., B.L. Damineli, R.G. Pileggi, and M.A. Cincotto, Engineered Fillers and Dispersants in Cementitious Materials. Cem. Concr. Res. (under review).
- Ritter, 2014, Making the most of red mud, Chem. Eng. News, 92, 33, 10.1021/cen-09208-scitech1 · doi:10.1021/cen-09208-scitech1
- Miller, 2015, Static versus time-dependent material selection charts and application in wood flour composites, J. Biobased Mater. Bioenergy, 9, 273, 10.1166/jbmb.2015.1517273 · doi:10.1166/jbmb.2015.1517273
- Lepech, 2014, Probabilistic design and management of environmentally sustainable repair and rehabilitation of reinforced concrete structures, Cem. Concr. Compos., 47, 19, 10.1016/j.cemconcomp.2013.10.009 · doi:10.1016/j.cemconcomp.2013.10.009
- Bray, 2016, 2014 Minerals Yearbook: Bauxite and Alumina, Bull. US Geol. Surv
- Flanagan, 2016, Mineral Commodity Summaries: Wollastonite, Bull. US Geol. Surv.
Cited by
Environmental impacts and decarbonization strategies in the cement and concrete industries
Habert, G., Miller, S. A., John, V. M., Provis, J. L., Favier, A., Horvath, A., & Scrivener, K. L. (2020) · Nature Reviews Earth & Environment · doi:10.1038/s43017-020-0093-3 · Cited by 1,572
Self-citationRissman, J., Bataille, C., Masanet, E., Aden, N., Morrow, W. R., Zhou, N., Elliott, N., Dell, R., Heeren, N., Huckestein, B., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114848 · Cited by 1,040
Self-citationde Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
Projecting future carbon emissions from cement production in developing countries
Cheng, D., Reiner, D. M., Yang, F., Cui, C., Meng, J., Shan, Y., Liu, Y., Tao, S., & Guan, D. (2023) · Nature Communications · doi:10.1038/s41467-023-43660-x · Cited by 425
Shah, I. H., Miller, S. A., Jiang, D., & Myers, R. J. (2022) · Nature Communications · doi:10.1038/s41467-022-33289-7 · Cited by 417
Self-citation
Metadata
- Authors
- Miller, S. A., John, V. M., Pacca, S. A., & Horvath, A.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 114
- Pages
- 115-124
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2756345397
- Cited by
- 757
- References
- 32
- FWCI
- 27.40
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- São Paulo Research Foundation (2016/05278-5)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.