The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Chloride-binding capacity of hydrotalcite in cement pastes containing dolomite and metakaolin
Open accessAbstract
In this study, we investigated well-hydrated cement pastes containing dolomite and metakaolin cured at 38 °C or 60 °C, which were exposed to NaCl or CaCl2 solutions of various concentrations. We determined the chloride-binding capacity, the phase assemblage and the composition of hydration phases formed. The dolomite reaction led to the formation of hydrotalcite, which contributed considerably to the chloride binding of the pastes. When the samples were exposed to CaCl2, significantly more chlorides were bound in the hydrotalcite than when the samples were exposed to NaCl. It was shown that hydrotalcite contained a similar amount of chloride per mol compared to Friedel's salt when exposed to CaCl2. By mass balance calculations, it was shown that the hydrotalcite formed in the samples containing dolomite can contribute to the chloride binding of the cement pastes to a similar extent as the Friedel's salt formed in the samples containing limestone.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The effect of supplementary cementitious materials on chloride binding in hardened cement paste
Thomas, M. D. A., Hooton, R. D., Scott, A., & Zibara, H. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.01.001 · Cited by 636
Ke, X., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.015 · Cited by 375
Thermodynamic modelling of alkali-activated slag cements
Myers, R. J., Lothenbach, B., Bernal, S. A., & Provis, J. L. (2015) · Applied Geochemistry · doi:10.1016/j.apgeochem.2015.06.006 · Cited by 240
Cited by
Supplementary cementitious materials: New sources, characterization, and performance insights
Juenger, M. C. G., Snellings, R., & Bernal, S. A. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.008 · Cited by 1,260
Towards ternary binders involving limestone additions — A review
Dhandapani, Y., Santhanam, M., Kaladharan, G., & Ramanathan, S. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106396 · Cited by 335
Stability of hydrotalcite (Mg-Al layered double hydroxide) in presence of different anions
Bernard, E., Zucha, W. J., Lothenbach, B., & Mäder, U. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106674 · Cited by 279
Quantification methods for chloride binding in Portland cement and limestone systems
Sui, S., Wilson, W., Georget, F., Maraghechi, H., Kazemi-Kamyab, H., Sun, W., & Scrivener, K. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105864 · Cited by 135
Chloride binding in Portland composite cements containing metakaolin and silica fume
Babaahmadi, A., Machner, A., Kunther, W., Figueira, J., Hemstad, P., & De Weerdt, K. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106924 · Cited by 130
Self-citation
Metadata
- Authors
- Machner, A., Zajac, M., Ben Haha, M., Kjellsen, K. O., Geiker, M. R., & De Weerdt, K.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-05
- Volume
- 107
- Pages
- 163-181
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2794270285
- Cited by
- 177
- References
- 3
- FWCI
- 12.57
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.