The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
The role of early age structural build-up in digital fabrication with concrete
Abstract
Abstract The advent of digital fabrication for concrete calls for advancing our understanding of the entanglement of processing technology, rheology, admixture use and hydration control, in addition to developing novel measurement and control techniques. We provide an overview of recently proposed building processes, defining the type and range of yield stress evolution that they require for successful building. In doing so, we explain which mechanisms are at stake and how their consequences can be measured. Controlling the structural build-up of concrete with the precision required by digital processes will be at the heart of future progress. For this, chemically controlling cement hydration of concrete is essential and we provide an overview of admixtures, focusing on “set on demand” solutions, concluding that activators should be added as closely to the delivery point as possible. Advantages and limitations are discussed and showcased using recent successes in process scaling and material and process control.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Mechanisms of cement hydration
Bullard, J. W., Jennings, H. M., Livingston, R. A., Nonat, A., Scherer, G. W., Schweitzer, J. S., Scrivener, K. L., & Thomas, J. J. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.09.011 · Cited by 2,237
Critical chloride content in reinforced concrete — A review
Angst, U., Elsener, B., Larsen, C. K., & Vennesland, Ø. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.08.006 · Cited by 1,420
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Self-citationAutomated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
A critical review of the use of 3-D printing in the construction industry
Wu, P., Wang, J., & Wang, X. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.04.005 · Cited by 1,002
The origins of thixotropy of fresh cement pastes
Roussel, N., Ovarlez, G., Garrault, S., et al. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.09.004 · Cited by 995
Self-citationStress from crystallization of salt
Scherer, G. W. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.12.034 · Cited by 969
Cited by
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.10.002 · Cited by 482
Particle-bed 3D printing in concrete construction – Possibilities and challenges
Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen, C., & Dillenburger, B. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.018 · Cited by 447
Concrete material science: Past, present, and future innovations
Van Damme, H. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.002 · Cited by 398
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Metadata
- Authors
- Reiter, L., Wangler, T., Roussel, N., & Flatt, R. J.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 112
- Pages
- 86-95
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2807968168
- Cited by
- 432
- References
- 37
- FWCI
- 31.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The role of early age structural build-up in digital fabrication with concrete. https://app.cochat.ai/papers/10.1016/j.cemconres.2018.05.011
- The paper
- Reiter, L., Wangler, T., Roussel, N., & Flatt, R. J. (2018). The role of early age structural build-up in digital fabrication with concrete. Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2018.05.011
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
