The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Comparing chloride ingress from seawater and NaCl solution in Portland cement mortar
Open accessAbstract
This study investigates whether chloride ingress testing can be done using NaCl solution instead of seawater when assessing the performance of concrete in marine conditions. Seawater contains besides sodium and chlorine additional elements such as sulfur and magnesium, which can change the phase assemblage in the concrete and thereby affect chloride ingress. Mortar samples prepared with Portland cement were exposed to seawater or NaCl solution with a similar chloride concentration. After 180 days of exposure to seawater, only the outer 1 mm was enriched in sulfur and magnesium, which had only a limited impact on the chloride ingress. Leaching, observed in the outer 10–20 mm both for NaCl and for seawater exposure had a much stronger influence on the chloride ingress. Hence, chloride ingress in marine exposed concrete can be assessed using NaCl solutions. To mirror the leaching in field exposure, the volume of exposure solution needs to be high.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wagner, T., Kulik, D. A., Hingerl, F. F., & Dmytrieva, S. V. (2012) · The Canadian Mineralogist · doi:10.3749/canmin.50.5.1173 · Cited by 621
Cited by
Supplementary cementitious materials: New sources, characterization, and performance insights
Juenger, M. C. G., Snellings, R., & Bernal, S. A. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.008 · Cited by 1,260
De Weerdt, K. (2021) · Materials and Structures · doi:10.1617/s11527-021-01793-9 · Cited by 57
“This leaching has been documented by a decrease in Ca(OH)2 in the exposed concrete [39, 61, 65].”
BackgroundInfluentialDetermination of sulfate content in OPC and CSA cement by sodium carbonate extraction method
Hou, W., Liu, Z., Huang, J., Yuan, Q., & He, F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.122056 · Cited by 17
Measuring chloride binding in cementitious materials: A review by RILEM TC 298-EBD
Georget, F., Babaahmadi, A., Machner, A., Mrak, M., Dolenec, S., Xiong, Q. X., Shiju, J., Snoeck, D., Suraneni, P., & Wilson, W. (2025) · Materials and Structures · doi:10.1617/s11527-025-02802-x · Cited by 10
Metadata
- Authors
- De Weerdt, K., Lothenbach, B., & Geiker, M. R.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 115
- Pages
- 80-89
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2897469279
- Cited by
- 219
- References
- 1
- FWCI
- 12.57
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.