The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete
Abstract
Abstract This study addresses the effect of curing regimes on the mechanical properties, hydration and microstructure of ultra-high performance concrete (UHPC). The results demonstrate that the mechanical properties are strengthened by increasing curing temperature, but the flexural/tensile to compressive strength ratio shows an unusual increasing tendency with increasing temperature and compressive strength, which is opposite to normal concrete. The nano-mechanical properties are also enhanced by heat treatment. The ultra-high density phase is dominated hydrates. Microstructure observation indicates that heat treatment promotes the formation of additional hydrates with high-packing density and stiffness such as tobermorite and xonotlite, enhancement of transition zone around steel fiber, quartz and clinker, average chain length of hydrates and pozzolanic reaction between quartz/silica fume and Ca(OH)2. The evolution of hydrates and microstructure due to curing regimes and the presence of quartz play key roles in controlling the unusual behavior of the strength ratio and improvement of mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444
Sneddon, I. N. (1965) · International Journal of Engineering Science · doi:10.1016/0020-7225(65)90019-4 · Cited by 4,346
Composition of reactive powder concretes
Richard, P., & Cheyrezy, M. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00144-2 · Cited by 2,358
Idris, M. H., Jafari, H., Harandi, S. E., Mirshahi, M., & Koleyni, S. J. (2012) · Advanced materials research · Cited by 2,357
THE CHEMISTRY OF CEMENT AND CONCRETE. THIRD EDITION
Lea, F. M. (1970) · Edward Arnold eBooks · Cited by 2,083
The chemistry of cement and concrete
DMR (1971) · Cement and Concrete Research · doi:10.1016/0008-8846(71)90062-7 · Cited by 1,672
Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.002 · Cited by 1,149
A realistic molecular model of cement hydrates
Pellenq, R. J.-M., Kushima, A., Shahsavari, R., Van Vliet, K. J., Buehler, M. J., Yip, S., & Ulm, F.-J. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0902180106 · Cited by 1,088
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Microstructure of ultra-high-performance concrete (UHPC) – A review study
Bahmani, H., & Mostofinejad, D. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104118 · Cited by 268
Liu, S., Shen, P., Xuan, D., Li, L., Sojobi, A., Zhan, B., & Poon, C. S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.103988 · Cited by 241
Self-citationSharma, R., Jang, J. G., & Bansal, P. P. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103314 · Cited by 181
Metadata
- Authors
- Shen, P., Lu, L., He, Y., Wang, F., & Hu, S.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 118
- Pages
- 1-13
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2913430713
- Cited by
- 301
- References
- 47
- FWCI
- 16.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete. https://app.cochat.ai/papers/10.1016/j.cemconres.2019.01.004
- The paper
- Shen, P., Lu, L., He, Y., Wang, F., & Hu, S. (2019). The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete. Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2019.01.004
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.