The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete
Abstract
This study addresses the effect of curing regimes on the mechanical properties, hydration and microstructure of ultra-high performance concrete (UHPC). The results demonstrate that the mechanical properties are strengthened by increasing curing temperature, but the flexural/tensile to compressive strength ratio shows an unusual increasing tendency with increasing temperature and compressive strength, which is opposite to normal concrete. The nano-mechanical properties are also enhanced by heat treatment. The ultra-high density phase is dominated hydrates. Microstructure observation indicates that heat treatment promotes the formation of additional hydrates with high-packing density and stiffness such as tobermorite and xonotlite, enhancement of transition zone around steel fiber, quartz and clinker, average chain length of hydrates and pozzolanic reaction between quartz/silica fume and Ca(OH)2. The evolution of hydrates and microstructure due to curing regimes and the presence of quartz play key roles in controlling the unusual behavior of the strength ratio and improvement of mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444
Sneddon, I. N. (1965) · International Journal of Engineering Science · doi:10.1016/0020-7225(65)90019-4 · Cited by 4,346
Composition of reactive powder concretes
Richard, P., & Cheyrezy, M. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00144-2 · Cited by 2,358
Idris, M. H., Jafari, H., Harandi, S. E., Mirshahi, M., & Koleyni, S. J. (2012) · Advanced materials research · Cited by 2,357
THE CHEMISTRY OF CEMENT AND CONCRETE. THIRD EDITION
Lea, F. M. (1970) · Edward Arnold eBooks · Cited by 2,251
The chemistry of cement and concrete
DMR (1971) · Cement and Concrete Research · doi:10.1016/0008-8846(71)90062-7 · Cited by 1,672
Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.002 · Cited by 1,149
A realistic molecular model of cement hydrates
Pellenq, R. J.-M., Kushima, A., Shahsavari, R., Van Vliet, K. J., Buehler, M. J., Yip, S., & Ulm, F.-J. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0902180106 · Cited by 1,088
Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review
Yoo, D.-Y., & Banthia, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.08.001 · Cited by 1,008
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Kong, D. L. Y., & Sanjayan, J. G. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.017 · Cited by 985
The nanogranular nature of C–S–H
Constantinides, G., & Ulm, F.-J. (2007) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.06.003 · Cited by 901
Backscattered electron imaging of cementitious microstructures: understanding and quantification
Scrivener, K. L. (2004) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.02.029 · Cited by 894
Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete
Wu, Z., Shi, C., He, W., & Wu, L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.028 · Cited by 865
Habel, K., Viviani, M., Denarié, E., & Brühwiler, E. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.03.009 · Cited by 647
Sorelli, L., Constantinides, G., Ulm, F.-J., & Toutlemonde, F. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.09.002 · Cited by 636
Yazıcı, H., Yardımcı, M. Y., Aydın, S., & Karabulut, A. Ş. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.08.003 · Cited by 439
Microstructural analysis of RPC (Reactive Powder Concrete)
Cheyrezy, M., Maret, V., & Frouin, L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00143-z · Cited by 410
Nanogranular packing of C–S–H at substochiometric conditions
Vandamme, M., Ulm, F.-J., & Fonollosa, P. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.09.017 · Cited by 409
Influence of silica fume on the tensile strength of concrete
Bhanja, S., & Sengupta, B. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.024 · Cited by 352
Manzano, H., Moeini, S., Marinelli, F., van Duin, A. C. T., Ulm, F.-J., & Pellenq, R. J.-M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja209152n · Cited by 347
Yazıcı, H., Yardımcı, M. Y., Yiğiter, H., Aydın, S., & Türkel, S. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.07.005 · Cited by 342
Yazıcı, H. (2007) · Building and Environment · doi:10.1016/j.buildenv.2006.03.013 · Cited by 312
Tai, Y.-S., Pan, H.-H., & Kung, Y.-N. (2011) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2011.04.008 · Cited by 292
Yang, S. L., Millard, S. G., Soutsos, M. N., Barnett, S. J., & Le, T. T. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.11.012 · Cited by 272
Microstructural investigation of innovative UHPC
Reda, M. M., Shrive, N. G., & Gillott, J. E. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00225-7 · Cited by 264
Experimental Study of Durability of Reactive Powder Concretes
Roux, N., Andrade, C., & Sanjuan, M. A. (1996) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(1996)8:1(1 · Cited by 262
Mondal, P., Shah, S. P., & Marks, L. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.07.001 · Cited by 261
Preparation of C200 green reactive powder concrete and its static–dynamic behaviors
Yunsheng, Z., Wei, S., Sifeng, L., Chujie, J., & Jianzhong, L. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.06.008 · Cited by 254
Nuclear Magnetic Resonance Spectroscopy of Cement-Based Materials
(1998) · Springer eBooks · doi:10.1007/978-3-642-80432-8 · Cited by 250
Microstructure changes of waste hydrated cement paste induced by accelerated carbonation
Fang, Y., & Chang, J. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.12.017 · Cited by 250
Combined effect of coarse aggregate and fiber on tensile behavior of ultra-high performance concrete
Liu, J., Han, F., Cui, G., Zhang, Q., Lv, J., Zhang, L., & Yang, Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.039 · Cited by 242
Cui, H. Z., Lo, T. Y., Memon, S. A., & Xu, W. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.053 · Cited by 204
Wongkeo, W., Thongsanitgarn, P., Pimraksa, K., & Chaipanich, A. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.08.046 · Cited by 184
Investigation of hydration and pozzolanic reaction in Reactive Powder Concrete (RPC) using 29Si NMR
Zanni, H., Cheyrezy, M., Maret, V., Philippot, S., & Nieto, P. (1996) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00197-2 · Cited by 178
Krakowiak, K. J., Thomas, J. J., Musso, S., James, S., Akono, A.-T., & Ulm, F.-J. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.08.008 · Cited by 174
Hu, C., & Li, Z. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.11.011 · Cited by 161
Nano-mechanical behavior of a green ultra-high performance concrete
Zhao, S., & Sun, W. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.029 · Cited by 160
Foley, E. M., Kim, J. J., & Taha, M. R. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.05.014 · Cited by 141
The mineralogy of the CaO–Al2O3–SiO2–H2O (CASH) hydroceramic system from 200 to 350 °C
Meller, N., Kyritsis, K., & Hall, C. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.10.002 · Cited by 125
Creep of UHPC in tension and compression: Effect of thermal treatment
Garas, V. Y., Kurtis, K. E., & Kahn, L. F. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.12.002 · Cited by 113
Han, B., Dong, S., Ou, J., Zhang, C., Wang, Y., Yu, X., & Ding, S. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.004 · Cited by 96
Impact of prolonged warm (85°C) moist cure on Portland cement paste
Paul, M., & Glasser, F. P. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00286-6 · Cited by 94
The role of silica fume in mortar: Transition zone versus bulk paste modification
Cohen, M. D., Goldman, A., & Chen, W. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90089-2 · Cited by 63
Influence of magnesium hydroxide content and fineness on the carbonation of calcium hydroxide
Chang, J. S., Li, Y., Cao, M., & Fang, Y. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.12.099 · Cited by 53
Maeda, H., Abe, K., & Ishida, E. H. (2011) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.119.375 · Cited by 22
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Microstructure of ultra-high-performance concrete (UHPC) – A review study
Bahmani, H., & Mostofinejad, D. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104118 · Cited by 268
Liu, S., Shen, P., Xuan, D., Li, L., Sojobi, A., Zhan, B., & Poon, C. S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.103988 · Cited by 241
Self-citationSharma, R., Jang, J. G., & Bansal, P. P. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103314 · Cited by 181
Metadata
- Authors
- Shen, P., Lu, L., He, Y., Wang, F., & Hu, S.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 118
- Pages
- 1-13
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2913430713
- Cited by
- 301
- References
- 47
- FWCI
- 16.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.