The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Effects of slag substitution on physical and mechanical properties of fly ash-based alkali activated binders (AABs)
Open accessAbstract
Abstract Neat fly ash-based alkali activated binders require high activator dosages and high temperature curing in order to develop satisfactory mechanical properties. Blending ground granulated blast furnace slag (GGBS) with fly ash can give medium to high strengths without the need for high temperature oven curing. An extensive investigation was carried out for understanding the effects of GGBS substitution of fly ash in mortar. GGBS substitution in the mix has an impact on mix proportions, fresh and hardened properties, and microstructure of reaction products. The strength of fly ash/GGBS blends cured at room temperature increased with the increase of GGBS content, whilst setting time showed an opposite trend. Fly ash/GGBS blends required lower activator dosages for obtaining high compressive strength, which has cost and environmental benefits. XRD, FTIR, TGA, and SEM/EDX results confirmed the presence of C-A-S-H gel as a reaction product with as low as 20% GGBS content.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The surface chemistry of amorphous silica. Zhuravlev model
Zhuravlev, L. T. (2000) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(00)00556-2 · Cited by 2,474
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Nath, P., & Sarker, P. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.080 · Cited by 1,557
Advances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Garcia-Lodeiro, I., Palomo, A., Fernández-Jiménez, A., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.006 · Cited by 1,366
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. S. J. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.006 · Cited by 1,317
Yip, C. K., Lukey, G. C., & van Deventer, J. S. J. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.042 · Cited by 1,274
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
Composition and microstructure of alkali activated fly ash binder: Effect of the activator
Fernández-Jiménez, A., & Palomo, A. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.03.003 · Cited by 1,144
The nature of C-S-H in hardened cements
Richardson, I. G. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00168-4 · Cited by 1,133
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Deb, P. S., Nath, P., & Sarker, P. K. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.001 · Cited by 941
Haha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.002 · Cited by 914
Alkali Activated Materials: State-of-the-Art Report, RILEM TC 224-AAM
(2014) · RILEM State-of-the-Art Reports · doi:10.1007/978-94-007-7672-2 · Cited by 906
Kumar, S., Kumar, R., & Mehrotra, S. P. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3934-5 · Cited by 807
Evolution of binder structure in sodium silicate-activated slag-metakaolin blends
Bernal, S. A., Provis, J. L., Rose, V., & Mejía de Gutierrez, R. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.09.004 · Cited by 786
Factors affecting the strength of alkali-activated slag
Wang, S.-D., Scrivener, K. L., & Pratt, P. L. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90026-4 · Cited by 716
Alkali activation of fly ash: Effect of the SiO2/Na2O ratio
Criado, M., Fernández-Jiménez, A., & Palomo, A. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.02.055 · Cited by 705
X-ray microtomography shows pore structure and tortuosity in alkali-activated binders
Provis, J. L., Myers, R. J., White, C. E., Rose, V., & van Deventer, J. S. J. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.03.004 · Cited by 572
Fang, G., Ho, W. K., Tu, W., & Zhang, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.008 · Cited by 528
Factors affecting the suitability of fly ash as source material for geopolymers
Díaz, E., Allouche, E. N., & Eklund, S. E. (2009) · Fuel · doi:10.1016/j.fuel.2009.09.012 · Cited by 521
A calorimetric study of early hydration of alkali-slag cements
Shi, C., & Day, R. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00126-w · Cited by 468
Gao, X., Yu, Q., & Brouwers, H. J. H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.065 · Cited by 458
Mineralogical and microstructural characterisation of alkali-activated fly ash/slag pastes
Puertas, F., & Fernández-Jiménez, A. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(02)00059-8 · Cited by 452
Richardson, I. G., Brough, A. R., Groves, G. W., & Dobson, C. M. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90002-7 · Cited by 449
Binding mechanism and properties of alkali-activated fly ash/slag mortars
Chi, M., & Huang, R. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.11.003 · Cited by 428
Ke, X., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.015 · Cited by 375
Quantification of phases with partial or no known crystal structures
Scarlett, N. V. Y., & Madsen, I. C. (2006) · Powder Diffraction · doi:10.1154/1.2362855 · Cited by 374
A study on the setting characteristics of sodium silicate-activated slag pastes
Chang, J. J. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)01096-7 · Cited by 330
Factors influencing the compressive strength of fly ash based geopolymers
Soutsos, M. N., Boyle, A. P., Vinai, R., Hadjierakleous, A., & Barnett, S. J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.045 · Cited by 326
Self-citationIsothermal calorimetry and in-situ XRD study of the NaOH activated fly ash, metakaolin and slag
Sun, Z., & Vollpracht, A. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.004 · Cited by 320
Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers
Jang, J. G., Lee, N. K., & Lee, H. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.048 · Cited by 318
Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements
Fernandez-Jimenez, A., & Puertas, F. (2003) · Advances in Cement Research · doi:10.1680/adcr.15.3.129.36623 · Cited by 285
Hydration Products and Reactivity of Blast‐Furnace Slag Activated by Various Alkalis
Escalante‐García, J. I., Fuentes, A. F., Gorokhovsky, A., Fraire‐Luna, P. E., & Mendoza‐Suarez, G. (2003) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2003.tb03623.x · Cited by 284
The effect of silica availability on the mechanism of geopolymerisation
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.02.001 · Cited by 279
Marjanović, N., Komljenović, M., Baščarević, Z., Nikolić, V., & Petrović, R. (2015) · Ceramics International · doi:10.1016/j.ceramint.2014.09.075 · Cited by 266
Chithiraputhiran, S., & Neithalath, N. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.03.061 · Cited by 250
Zhao, X., Liu, C., Zuo, L., Wang, L., Zhu, Q., & Wang, M. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.11.019 · Cited by 244
Phase diagrams for alkali-activated slag binders
Myers, R. J., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.006 · Cited by 241
Effect of nanosilica-based activators on the performance of an alkali-activated fly ash binder
Rodríguez, E. D., Bernal, S. A., Provis, J. L., Paya, J., Monzo, J. M., & Borrachero, M. V. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.08.025 · Cited by 214
Hardening mechanisms of an alkaline-activated class F fly ash
Xie, Z., & Xi, Y. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00571-3 · Cited by 202
Some factors affecting early hydration of alkali-slag cements
Shi, C., & Day, R. L. (1996) · Cement and Concrete Research · doi:10.1016/s0008-8846(96)85031-9 · Cited by 187
Strength and durability properties of alkali activated slag and fly ash-based geopolymer concrete
Adam, A. A. (2010) · RMIT Research Repository (RMIT University Library) · doi:10.25439/rmt.27351330 · Cited by 177
Microscopy and microanalysis of inorganic polymer cements. 1: remnant fly ash particles
Lloyd, R. R., Provis, J. L., & van Deventer, J. S. J. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3077-0 · Cited by 170
Hydration of alkali-activated slag: thermodynamic modelling
Lothenbach, B., & Gruskovnjak, A. (2007) · Advances in Cement Research · doi:10.1680/adcr.2007.19.2.81 · Cited by 166
Gong, K., & White, C. E. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.09.003 · Cited by 125
Escalante-Garcia, J. I., Campos-Venegas, K., Gorokhovsky, A. V., & Fernández, A. J. R. (2006) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1179/174367606x120151 · Cited by 97
Singh, G. V. P. B., & Subramaniam, K. V. L. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.05.001 · Cited by 90
Green concrete or red herring? – future of alkali-activated materials
Provis, J. L. (2014) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1179/1743676114y.0000000177 · Cited by 83
Singh, G. V. P. B., & Subramaniam, K. V. L. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.10.010 · Cited by 73
Reactivity of Fly Ash At High pH
Pietersen, H. S., Fraaij, A. L. A., & Bijen, J. M. J. M. (1989) · MRS Proceedings · doi:10.1557/proc-178-139 · Cited by 47
Smith, M. A., & Osborne, G. J. (1977) · Cited by 36
Cited by
A review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials
Sun, B., Ye, G., & de Schutter, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126843 · Cited by 386
John, S. K., Nadir, Y., & Girija, K. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122443 · Cited by 290
Singh, R. P., Vanapalli, K. R., Cheela, V. R. S., Peddireddy, S. R., Sharma, H. B., & Mohanty, B. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131168 · Cited by 227
Ambient-cured geopolymer concrete with single alkali activator
Zannerni, G. M., Fattah, K. P., & Al-Tamimi, A. K. (2020) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2019.e00131 · Cited by 108
Metadata
- Authors
- Rafeet, A., Vinai, R., Soutsos, M., & Sha, W.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 122
- Pages
- 118-135
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2943199722
- Cited by
- 254
- References
- 54
- FWCI
- 11.77
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.