The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Hydration of alkali-activated slag: thermodynamic modelling
Abstract
The composition of solid and liquid phases of alkali-activated slag systems was investigated by thermodynamic modelling. The calculations predict the formation of C(–A)–S–H, stratlingite and hydrotalcite in different alkali-activated slag systems, which agrees well with experimental findings. In addition traces of FeS and ettringite are predicted to precipitate. The type of alkaline activator (Na-silicate, NaOH) has no influence on the type of hydrates formed but influences the Ca/Si ratio of the C–S–H. The addition of sodium silicate leads to the formation of C–S–H with a higher Ca/Si ratio (1.1–1.2), whereas NaOH results in a Ca/Si ratio of 0.8to1.1. In contrast, the kind and concentration of the activator has strong influence on the composition of the pore solution. Low concentrations of the alkaline activator result in lower Na, Si and Al concentrations and lower pH values. In all pore solutions a high concentration of sulphide (HS–) is expected to be present.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Nagra/PSI Chemical Thermodynamic Data Base 01/01
Hummel, W., Berner, U., Curti, E., Pearson, F. J., & Thoenen, T. (2002) · Radiochimica Acta · doi:10.1524/ract.2002.90.9-11_2002.805 · Cited by 705
Puertas, F., Fernández-Jiménez, A., & Blanco-Varela, M. T. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00254-0 · Cited by 409
Cited by
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Advances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Lothenbach, B., Kulik, D. A., Matschei, T., Balonis, M., Baquerizo, L., Dilnesa, B., Miron, G. D., & Myers, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.018 · Cited by 1,250
Self-citationBen Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Self-citationGeopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Metadata
- Authors
- Lothenbach, B., & Gruskovnjak, A.
- Venue
- Advances in Cement Research
- Publisher
- Emerald
- Published
- 2007-04
- Volume
- 19
- Issue
- 2
- Pages
- 81-92
- ISSN
- 0951-7197 (ISSN-L)
- 1751-7605
- OpenAlex
- W1970474559
- Cited by
- 166
- References
- 3
- FWCI
- 13.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydration of alkali-activated slag: thermodynamic modelling. https://app.cochat.ai/papers/10.1680/adcr.2007.19.2.81
- The paper
- Lothenbach, B., & Gruskovnjak, A. (2007). Hydration of alkali-activated slag: thermodynamic modelling. Advances in Cement Research. https://doi.org/10.1680/adcr.2007.19.2.81
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.