The DOI matches its Crossref record.
Mechanical properties of porous ceramic scaffolds: Influence of internal dimensions
Open accessAbstract
Highly porous ceramic scaffolds have been fabricated from a 70% SiO2–30% CaO glass powder using stereolithography and the lost-mould process combined with gel-casting. After sintering at 1200 °C the glass crystallised to a structure of wollastonite and pseudowollastonite grains in a glassy matrix with a bulk porosity of 1.3%. All scaffolds had a simple cubic strut structure with an internal porosity of approximately 42% and internal pore dimensions in the range 300–600 μm. The mean crushing strength of the scaffolds is in the range 10–25 MPa with the largest pore sizes showing the weakest strengths. The variability of scaffold strengths has been characterised using Weibull statistics and each set of scaffolds showed a Weibull modulus of m≈3 independent of pore size. The equivalent strength of the struts within the porous ceramics was estimated to be in the range 40–80 MPa using the models of the Gibson and Ashby. These strengths were found to scale with specimen size consistent with the Weibull modulus obtained from compression tests. Using a Weibull analysis, these strengths are shown to be in accordance with the strength of 3-point bend specimens of the bulk glass material fabricated using identical methods. The strength and Weibull modulus of these scaffolds are comparable to those reported for other porous ceramic scaffold materials of similar porosity made by different fabrication routes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Normal Bone Anatomy and Physiology
Clarke, B. (2008) · Clinical Journal of the American Society of Nephrology · doi:10.2215/cjn.04151206 · Cited by 2,192
Mechanical properties of PNIPAM based hydrogels: A review
Haq, M. A., Su, Y., & Wang, D. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.09.081 · Cited by 695
Optimizing scaffold pore size for tissue engineering: insights across various tissue types
Mukasheva, F., Adilova, L., Dyussenbinov, A., Yernaimanova, B., Abilev, M., & Akilbekova, D. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1444986 · Cited by 468
Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer
Gregor, A., Filová, E., Novák, M., Kronek, J., Chlup, H., Buzgo, M., Blahnová, V., Lukášová, V., Bartoš, M., Nečas, A., et al. (2017) · Journal of Biological Engineering · doi:10.1186/s13036-017-0074-3 · Cited by 406
Bioceramics and Scaffolds: A Winning Combination for Tissue Engineering
Baino, F., Novajra, G., & Vitale-Brovarone, C. (2015) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2015.00202 · Cited by 390
Metadata
- Authors
- Sabree, I., Gough, J. E., & Derby, B.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2015-08
- Volume
- 41
- Issue
- 7
- Pages
- 8425-8432
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2072396691
- Cited by
- 225
- References
- 0
- FWCI
- 10.22
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical properties of porous ceramic scaffolds: Influence of internal dimensions. https://app.cochat.ai/papers/10.1016/j.ceramint.2015.03.044
- The paper
- Sabree, I., Gough, J. E., & Derby, B. (2015). Mechanical properties of porous ceramic scaffolds: Influence of internal dimensions. Ceramics International. https://doi.org/10.1016/j.ceramint.2015.03.044
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.