The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
Processing, properties and applications of highly porous geopolymers: A review
Abstract
Abstract Geopolymers, possessing a semi-crystalline three-dimensional inorganic network generated by the dissolution and reaction of a solid alumino-silicate source with an activating solution, have attracted increasing attention from both academia and industry because of their unique and favorable characteristics. This review deals with the synthesis, characterization and potential applications of porous geopolymers, realized through different processing routes. Firstly, the processing approaches are divided into five categories: (i) Direct foaming, (ii) Replica method, (iii) Sacrificial filler method, (iv) Additive manufacturing, and (v) Other methods. Their microstructure, porosity and properties are compared and discussed in relation also to the different processing routes. This review highlights the fact that porous geopolymers are promising low-cost candidates for technologically significant applications such as catalyst supports or membranes, filtration of liquid or gases, adsorption and insulation. This review aims at summarizing the main published results and fostering further investigations into developing innovative ways to generate components with improved properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
A classification of studies on properties of foam concrete
Ramamurthy, K., Nambiar, E. K. K., & Gandhi, I. S. R. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.04.006 · Cited by 1,179
Compression Strength of Porous Sintered Alumina and Zirconia: 9th Communication to Ceramography
RYSHKEWITCH, E. (1953) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1953.tb12837.x · Cited by 1,151
Geopolymers and geopolymeric materials
Davidovits, J. (1989) · Journal of Thermal Analysis · doi:10.1007/bf01904446 · Cited by 1,148
Properties and applications of foamed concrete; a review
Amran, M., Farzadnia, N., & Ali, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.112 · Cited by 1,123
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Self-citationAlkali-activated binders: A review
Pacheco-Torgal, F., Castro-Gomes, J., & Jalali, S. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.10.015 · Cited by 989
Geopolymerisation: A review and prospects for the minerals industry
Komnitsas, K., & Zaharaki, D. (2007) · Minerals Engineering · doi:10.1016/j.mineng.2007.07.011 · Cited by 955
Geopolymer foam concrete: An emerging material for sustainable construction
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.081 · Cited by 879
Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results
Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2005) · Chemistry of Materials · doi:10.1021/cm050230i · Cited by 818
Synthesis and characterization of red mud and rice husk ash-based geopolymer composites
He, J., Jie, Y., Zhang, J., Yu, Y., & Zhang, G. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.11.010 · Cited by 770
Macro-porous ceramics: processing and properties
Ohji, T., & Fukushima, M. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000006 · Cited by 689
The relationship between porosity and strength for porous concrete
Lian, C., Zhuge, Y., & Beecham, S. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.05.005 · Cited by 683
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.03.013 · Cited by 651
Structure and properties of clay-based geopolymer cements: A review
Liew, Y.-M., Heah, C.-Y., Mohd Mustafa, A. B., & Kamarudin, H. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.08.002 · Cited by 574
Fly ash-based geopolymers: The relationship between composition, pore structure and efflorescence
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.06.004 · Cited by 527
Alkali-activated binders: A review. Part 2. About materials and binders manufacture
Pacheco-Torgal, F., Castro-Gomes, J., & Jalali, S. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.03.019 · Cited by 519
The heavy metal adsorption characteristics on metakaolin-based geopolymer
Cheng, T. W., Lee, M. L., Ko, M. S., Ueng, T. H., & Yang, S. F. (2012) · Applied Clay Science · doi:10.1016/j.clay.2011.11.027 · Cited by 456
Development of geopolymer mortar under ambient temperature for in situ applications
Al-Majidi, M. H., Lampropoulos, A., Cundy, A., & Meikle, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.085 · Cited by 410
Thermal conductivity of porous materials
Smith, D. S., Alzina, A., Bourret, J., Nait-Ali, B., Pennec, F., Tessier-Doyen, N., Otsu, K., Matsubara, H., Elser, P., & Gonzenbach, U. T. (2013) · Journal of Materials Research · doi:10.1557/jmr.2013.179 · Cited by 407
Method of formulating geopolymer for 3D printing for construction applications
Xia, M., & Sanjayan, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.136 · Cited by 359
Fundamentals and Applications of Structured Ceramic Foam Catalysts
Twigg, M. V., & Richardson, J. T. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie061122o · Cited by 348
Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic
Liu, D.-M. (1997) · Ceramics International · doi:10.1016/s0272-8842(96)00009-0 · Cited by 325
A comparison between different foaming methods for the synthesis of light weight geopolymers
Masi, G., Rickard, W. D. A., Vickers, L., Bignozzi, M. C., & van Riessen, A. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.05.108 · Cited by 312
The pore structure and permeability of alkali activated fly ash
Ma, Y., Hu, J., & Ye, G. (2013) · Fuel · doi:10.1016/j.fuel.2012.05.034 · Cited by 308
Novel porous fly-ash containing geopolymer monoliths for lead adsorption from wastewaters
Novais, R. M., Buruberri, L. H., Seabra, M. P., & Labrincha, J. A. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.07.059 · Cited by 262
Microstructure and Microchemistry of Fully‐Reacted Geopolymers and Geopolymer Matrix Composites
Kriven, W. M., Bell, J. L., & Gordon, M. (2006) · Ceramic Transactions Series · doi:10.1002/9781118406892.ch15 · Cited by 259
Lightweight concretes of activated metakaolin-fly ash binders, with blast furnace slag aggregates
Aguilar, R. A., Burciaga-Díaz, O., & Escalante-Garcia, J. I. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.12.024 · Cited by 250
Duan, P., Yan, C., Zhou, W., & Ren, D. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.05.143 · Cited by 237
Porous geopolymeric spheres for removal of Cu(II) from aqueous solution: Synthesis and evaluation
Ge, Y., Cui, X., Kong, Y., Li, Z., He, Y., & Zhou, Q. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.09.038 · Cited by 236
Thermal insulating foamy geopolymers from perlite
Vaou, V., & Panias, D. (2010) · Minerals Engineering · doi:10.1016/j.mineng.2010.07.015 · Cited by 235
Properties of inorganic polymer (geopolymer) mortars made of glass cullet
Cyr, M., Idir, R., & Poinot, T. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-6107-2 · Cited by 232
Silica fume as porogent agent in geo-materials at low temperature
Prud’homme, É., Michaud, P., Joussein, E., et al. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.01.014 · Cited by 231
Porous biomass fly ash-based geopolymers with tailored thermal conductivity
Novais, R. M., Buruberri, L. H., Ascensão, G., Seabra, M. P., & Labrincha, J. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.083 · Cited by 225
3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide
Zhong, J., Zhou, G.-X., He, P.-G., Yang, Z.-H., & Jia, D.-C. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.102 · Cited by 208
Performance of fibre reinforced, low density metakaolin geopolymers under simulated fire conditions
Rickard, W. D. A., Vickers, L., & van Riessen, A. (2013) · Applied Clay Science · doi:10.1016/j.clay.2012.10.006 · Cited by 201
Preparation of phosphoric acid-based porous geopolymers
Liu, L., Cui, X., Shu-heng, Q., Jun-li, Y., & Zhang, L. (2010) · Applied Clay Science · doi:10.1016/j.clay.2010.10.004 · Cited by 194
GEOPOLYMER: Chemistry & Applications
Davidovits, J. (2011) · Cited by 190
Kamseu, E., Nait-Ali, B., Bignozzi, M. C., Leonelli, C., Rossignol, S., & Smith, D. S. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.12.030 · Cited by 187
Direct ink writing of geopolymeric inks
Franchin, G., Scanferla, P., Zeffiro, L., Elsayed, H., Baliello, A., Giacomello, G., Pasetto, M., & Colombo, P. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.01.030 · Cited by 187
Self-citationPreparation of geopolymer-based inorganic membrane for removing Ni2+ from wastewater
Ge, Y., Yuan, Y., Wang, K., He, Y., & Cui, X. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.08.006 · Cited by 179
Inorganic foams made from alkali-activated fly ash: Mechanical, chemical and physical properties
Hlaváček, P., Šmilauer, V., Škvára, F., Kopecký, L., & Šulc, R. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.08.024 · Cited by 179
Physical and mechanical properties of lightweight aerated geopolymer
Sanjayan, J. G., Nazari, A., Chen, L., & Nguyen, G. H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.043 · Cited by 176
Alkali activated slag foams: The effect of the alkali reaction on foam characteristics
Hajimohammadi, A., Ngo, T., Mendis, P. A., Kashani, A., & van Deventer, J. S. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.134 · Cited by 166
Recent developments on inorganic polymers synthesis and applications
Lemougna, P. N., Wang, K.-T., Tang, Q., Melo, U. C., & Cui, X.-M. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.07.027 · Cited by 160
Regulating the chemical foaming reaction to control the porosity of geopolymer foams
Hajimohammadi, A., Ngo, T., Mendis, P., & Sanjayan, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.026 · Cited by 159
Geopolymers as solid adsorbent for CO2 capture
Minelli, M., Medri, V., Papa, E., Miccio, F., Landi, E., & Doghieri, F. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.04.013 · Cited by 158
Porosity and insulating properties of silica-fume based foams
Papa, E., Medri, V., Kpogbémabou, D., Morinière, V., Laumonier, J., Vaccari, A., & Rossignol, S. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.09.031 · Cited by 154
Relative strengths of phosphoric acid-reacted and alkali-reacted metakaolin materials
Perera, D. S., Hanna, J. V., Davis, J., Blackford, M. G., Latella, B. A., Sasaki, Y., & Vance, E. R. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2913-6 · Cited by 152
Geopolymer foams by gelcasting
Cilla, M. S., Colombo, P., & Morelli, M. R. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.11.011 · Cited by 149
Self-citationAlkali-bonded ceramics with hierarchical tailored porosity
Landi, E., Medri, V., Papa, E., Dědeček, J., Klein, P., Benito, P., & Vaccari, A. (2012) · Applied Clay Science · doi:10.1016/j.clay.2012.09.027 · Cited by 140
New synthesis method for the production of coal fly ash-based foamed geopolymers
Böke, N., Birch, G. D., Nyale, S. M., & Petrik, L. F. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.041 · Cited by 129
Lecomte, I., Liégeois, M., Rulmont, A., Cloots, R., & Maseri, F. (2003) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2003.0360 · Cited by 123
Performance of solid and cellular structured fly ash geopolymers exposed to a simulated fire
Rickard, W. D. A., & van Riessen, A. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.002 · Cited by 121
Korat, L., & Ducman, V. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.03.010 · Cited by 110
Thermomechanical performance of blended metakaolin-GGBS alkali-activated foam concrete
Samson, G., Cyr, M., & Gao, X. X. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.146 · Cited by 102
Lightweight geopolymer-based hybrid materials
Roviello, G., Menna, C., Tarallo, O., Ricciotti, L., Messina, F., Ferone, C., Asprone, D., & Cioffi, R. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.07.020 · Cited by 100
Kamseu, E., Ngouloure, Z. N. M., Naït‐Ali, B., Zekeng, S. S., Melo, U. C., Rossignol, S., & Leonelli, C. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.11.066 · Cited by 99
Open cell geopolymer foams by a novel saponification/peroxide/gelcasting combined route
Cilla, M. S., Morelli, M. R., & Colombo, P. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.04.001 · Cited by 95
Self-citationNovel porous fly ash-containing geopolymers for pH buffering applications
Novais, R. M., Buruberri, L. H., Seabra, M. P. D. S., Bajāre, D., & Labrincha, J. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.114 · Cited by 94
Alzeer, M. I. M., MacKenzie, K. J. D., & Keyzers, R. A. (2016) · Applied Catalysis A General · doi:10.1016/j.apcata.2016.06.024 · Cited by 92
Synthesis of porous hierarchical geopolymer monoliths by ice-templating
Papa, E., Medri, V., Benito, P., Vaccari, A., Bugani, S., Jaroszewicz, J., Święszkowski, W., & Landi, E. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.05.043 · Cited by 87
A facile method for preparation of floatable and permeable fly ash-based geopolymer block
Liu, Y., Yan, C., Zhang, Z., Gong, Y., Wang, H., & Qiu, X. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.09.044 · Cited by 85
Emdadi, Z., Asim, N., Amin, M. H., Yarmo, M. A., Maleki, A. R., Azizi, M., & Sopian, K. (2017) · Applied Sciences · doi:10.3390/app7050514 · Cited by 84
Porous geopolymer spheres as novel pH buffering materials
Novais, R. M., Seabra, M. P., & Labrincha, J. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.008 · Cited by 81
Microwave synthesis of thermal insulating foams from coal derived bottom ash
Haq, E. U., Padmanabhan, S. K., & Licciulli, A. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.10.017 · Cited by 76
Duan, P., Song, L., Yan, C., Ren, D., & Li, Z. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.01.025 · Cited by 76
Ziegler, D., Formia, A., Tulliani, J., & Palmero, P. (2016) · Materials · doi:10.3390/ma9060466 · Cited by 68
Cilla, M. S., Innocentini, M. D. D. M., Morelli, M. R., & Colombo, P. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14902 · Cited by 68
Self-citationEffect of process parameters on the physical properties of porous geopolymers obtained by gelcasting
Cilla, M. S., Morelli, M. R., & Colombo, P. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.05.074 · Cited by 59
Self-citationSynthesis & characterization of natural soil based inorganic polymer foam for thermal insulations
Zaidi, S. F. A., Haq, E. U., Nur, K., Ejaz, N., Anis-ur-Rehman, M., Zubair, M., & Naveed, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.112 · Cited by 58
Kumar, E. M., & Ramamurthy, K. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.08.153 · Cited by 52
Lee, S., Jou, H., van Riessen, A., Rickard, W. D. A., Chon, C., & Kang, N.-H. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.10.072 · Cited by 46
Cesium-adsorbent Geopolymer Foams Based on Silica from Rice Husk and Metakaolin
López, F. J., Sugita, S., & Kobayashi, T. (2013) · Chemistry Letters · doi:10.1246/cl.130851 · Cited by 42
Fabrication and properties of foam geopolymer using circulating fluidized bed combustion fly ash
Liu, Z., Shao, N., Wang, D., Qin, J.-F., Huang, T., Song, W. G., Lin, M.-X., Yuan, J., & Wang, Z. (2014) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-014-0870-4 · Cited by 40
Interactive powder mixture concept for the preparation of geopolymers with fine porosity
Gualtieri, M. L., Cavallini, A., & Romagnoli, M. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.03.030 · Cited by 39
Chemically Bonded Phosphate Ceramics‐A Novel Class of Geopolymers
Wagh, A. S. (2006) · Ceramic transactions /Ceramic transactions · doi:10.1002/9781118408353.ch10 · Cited by 38
Use of silicon carbide sludge to form porous alkali-activated materials for insulating application
Prud’homme, É., Joussein, E., & Rossignol, S. (2015) · The European Physical Journal Special Topics · doi:10.1140/epjst/e2015-02494-7 · Cited by 37
Haq, E. U., Padmanabhan, S. K., Zubair, M., Ali, L., & Licciulli, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.135 · Cited by 36
Insights into the macroporosity of freeze-cast hierarchical geopolymers
Papa, E., Medri, V., Benito, P., Vaccari, A., Bugani, S., Jaroszewicz, J., & Landi, E. (2016) · RSC Advances · doi:10.1039/c6ra02232d · Cited by 35
Liu, Z., Shao, N., Qin, J.-F., Kong, F.-L., Wang, C.-X., & Wang, D. (2015) · Journal of Central South University · doi:10.1007/s11771-015-2904-0 · Cited by 31
Cited by
Geopolymers as an alternative to Portland cement: An overview
Singh, N. B., & Middendorf, B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117455 · Cited by 817
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127085 · Cited by 369
Geopolymer foams: An overview of recent advancements
Novais, R. M., Pullar, R. C., & Labrincha, J. A. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100621 · Cited by 303
Metadata
- Authors
- Bai, C., & Colombo, P.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 44
- Issue
- 14
- Pages
- 16103-16118
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2804005144
- Cited by
- 391
- References
- 85
- FWCI
- 32.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.