The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites
Abstract
Abstract Ceramics and ceramic reinforced metal matrix composites (MMCs) are widely used in severe working conditions and have been applied in biomedical, aerospace, electronic, and other high-end engineering industries owing to their superior properties of high wear resistance, outstanding chemical inertness, and excellent properties at elevated temperatures. These superior properties, on the other hand, make it difficult to process these materials with conventional manufacturing methods, posing problems of high cost and energy consumptions. In response to this problem, direct additive manufacturing (AM), which is equipped with a high-power-density laser beam as heat source, has been developed and extensively employed for processing ceramics and ceramic reinforced MMCs. Compared with other direct AM processes, laser deposition-additive manufacturing (LD-AM) process excels in several aspects, such as lower labor intensity, higher fabrication efficiency, and capabilities of parts remanufacturing and functionally gradient composite materials fabrication. Besides these benefits, problems of poor bonding, cracking, lowered toughness, etc. still exist in LD-AM fabricated parts. This paper reviews developments on LD-AM of ceramics and ceramic reinforced MMCs in both bulk parts fabrication and cladding. Main issues to be solved, corresponding solutions, and the trend of development are summarized and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
State of the art of zirconia for dental applications
Denry, I., & Kelly, J. R. (2008) · Dental Materials · doi:10.1016/j.dental.2007.05.007 · Cited by 2,133
Metal matrix composites – From science to technological significance
Miracle, D. B. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.05.027 · Cited by 1,921
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?
Huang, L. J., Geng, L., & Peng, H.-X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.002 · Cited by 788
Ning, F., Cong, W., Hu, Y., & Wang, H. (2017) · Journal of Composite Materials · doi:10.1177/0021998316646169 · Cited by 632
Self-citationAttar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Ceramic and metal matrix composites: Routes and properties
Rosso, M. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.04.038 · Cited by 558
Cited by
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
Additive manufacturing of functionally graded metallic materials using laser metal deposition
Yan, L., Chen, Y., & Liou, F. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100901 · Cited by 367
Laser-based directed energy deposition (DED-LB) of advanced materials
Svetlizky, D., Zheng, B., Vyatskikh, A., Das, M., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2022) · Materials Science and Engineering: A · doi:10.1016/j.msea.2022.142967 · Cited by 331
Wei, C., & Li, L. (2021) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.1928520 · Cited by 316
A review on additive manufacturing of ceramic matrix composites
Sun, J., Ye, D., Zou, J., Chen, X., Wang, Y., Yuan, J., Liang, H., Qu, H., Binner, J., & Bai, J. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.06.039 · Cited by 265
Metadata
- Authors
- Hu, Y., & Cong, W.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 44
- Issue
- 17
- Pages
- 20599-20612
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2886436362
- Cited by
- 276
- References
- 27
- FWCI
- 12.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites. https://app.cochat.ai/papers/10.1016/j.ceramint.2018.08.083
- The paper
- Hu, Y., & Cong, W. (2018). A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites. Ceramics International. https://doi.org/10.1016/j.ceramint.2018.08.083
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.