The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing
Abstract
Abstract Photosensitive Al2O3-resin slurries with high solid loading, low viscosity used for stereolithography based additive manufacturing were prepared in this paper. The dispersion behavior and rheological behavior of the Al2O3-resin slurries were studied by rheology observation and sedimentation tests. The dispersant type, concentration and solid loading had significant effects on the rheological behavior and stability of the photosensitive Al2O3-resin slurries. A long term stability and homogeneity slurry was obtained when the dispersant and concentration were KOS110 and 5 wt%, respectively. The Al2O3 slurry prepared with a high solid loading up to 60 vol%, low viscosity of 15.4 Pa s at 200 s−1 was chosen for stereolithography based additive manufacturing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Mechanism for Non-Newtonian Flow in Suspensions of Rigid Spheres
Krieger, I. M., & Dougherty, T. J. (1959) · Transactions of the Society of Rheology · doi:10.1122/1.548848 · Cited by 3,402
Freeform fabrication of ceramics via stereolithography
Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815
Ceramic suspensions suitable for stereolithography
Hinczewski, C., Corbel, S., & Chartier, T. (1998) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(97)00186-6 · Cited by 351
Ruiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Stereolithography of structural complex ceramic parts
Chartier, T., Chaput, C., Doreau, F., & Loiseau, M. (2002) · Journal of Materials Science · doi:10.1023/a:1016102210277 · Cited by 274
Additive Manufacturing of Dense Ceramic Parts via Direct Ink Writing of Aqueous Alumina Suspensions
Rueschhoff, L., Costakis, W., Michie, M., Youngblood, J., & Trice, R. (2016) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12557 · Cited by 251
Wu, H., Cheng, Y., Liu, W., He, R., Zhou, M., Wu, S., Song, X., & Chen, Y. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.08.024 · Cited by 248
Self-citationInfluence of Resin Composition on the Defect Formation in Alumina Manufactured by Stereolithography
Johansson, E., Lidström, O., Johansson, J., Lyckfeldt, O., & Adolfsson, E. (2017) · Materials · doi:10.3390/ma10020138 · Cited by 197
The effect of the surfactants on the formulation of UV-curable SLA alumina suspension
Li, K., & Zhao, Z. (2017) · Ceramics International · doi:10.1016/j.ceramint.2016.11.143 · Cited by 195
Alumina–zirconium ceramics synthesis by selective laser sintering/melting
Shishkovsky, I., Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.09.001 · Cited by 186
Cited by
Zhou, S., Liu, G., Wang, C., Zhang, Y., Yan, C., & Shi, Y. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112632 · Cited by 150
Xiao, C., Zheng, K., Chen, S., Li, N., Shang, X., Wang, F., Liang, J., Khan, S. B., Shen, Y., Lu, B., et al. (2023) · Additive Manufacturing · doi:10.1016/j.addma.2023.103607 · Cited by 63
DLP of Translucent Alumina: In-Depth Investigation on Slurry Development and Debinding Regimes
De Lisi, M., Shu, C., Attia, U. M., & Essa, K. (2023) · Machines · doi:10.3390/machines11030321 · Cited by 16
Metadata
- Authors
- Zhang, K., Xie, C., Wang, G., He, R., Ding, G., Wang, M., Dai, D., & Fang, D.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 45
- Issue
- 1
- Pages
- 203-208
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2892208067
- Cited by
- 313
- References
- 17
- FWCI
- 12.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing. https://app.cochat.ai/papers/10.1016/j.ceramint.2018.09.152
- The paper
- Zhang, K., Xie, C., Wang, G., He, R., Ding, G., Wang, M., Dai, D., & Fang, D. (2019). High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing. Ceramics International. https://doi.org/10.1016/j.ceramint.2018.09.152
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
