The DOI matches its Crossref record.
Hydroxyapatite nano bioceramics optimized 3D printed poly lactic acid scaffold for bone tissue engineering application
Abstract
Abstract To achieve optimum functionality and mechanical properties of advanced manufacturing-based scaffolds for biomedical application, it is important to study their mechanical strength by 3D-printing at different orientations. This study examined the effects of printing at different orientations on the mechanical properties of synthesized 3D-polylactic acid (PLA) and hydroxyapatite-modified PLA (PLA-HAp) scaffolds. A total number of 30 samples were printed in three orientations on the XY plane: 0°, 45°, and 90°. Finite element modeling and simulation was employed to identify the strongest scaffold in terms of compression strength, which is the primary criterion for load bearing bone tissue scaffolds. These findings indicate that 3D-printing at an orientation of 90° on the XY plane resulted in a scaffold with the highest compression strength. Moreover, the fabricated PLA scaffolds showed very poor cell attachment and proliferation on their surface, which is not suitable for their biomedical application. This study additionally showed the optimization of a very simple post-fabrication modification technique with nano HAp for better cell attachment and proliferation with enhanced mechanical properties. The post-fabrication modification of PLA scaffolds by nano-HAp results in excellent cell attachment property with enhanced mechanical strength and stability of up to 47.16% for 90° 3D-printed PLA-HAp scaffolds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Hydroxyapatite: A journey from biomaterials to advanced functional materials
Mondal, S., Park, S., Choi, J., Vu, T. T. H., Doan, V. H. M., Vo, T. T., Lee, B., & Oh, J. (2023) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2023.103013 · Cited by 344
Self-citationBiopolymeric sustainable materials and their emerging applications
Arif, Z. U., Khalid, M. Y., Sheikh, M. F., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108159 · Cited by 288
Bikiaris, N. D., Koumentakou, I., Samiotaki, C., Meimaroglou, D., Varytimidou, D., Karatza, A., Kalantzis, Z., Roussou, M., Bikiaris, R. D., & Papageorgiou, G. Z. (2023) · Polymers · doi:10.3390/polym15051196 · Cited by 279
Ebrahimi, Z., Irani, S., Ardeshirylajimi, A., & Seyedjafari, E. (2022) · Scientific Reports · doi:10.1038/s41598-022-15602-y · Cited by 141
Metadata
- Authors
- Mondal, S., Nguyen, T. P., Pham, V. H., Hoang, G., Manivasagan, P., Kim, M. H., Nam, S. Y., & Oh, J.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 46
- Issue
- 3
- Pages
- 3443-3455
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2979793515
- Cited by
- 202
- References
- 0
- FWCI
- 8.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydroxyapatite nano bioceramics optimized 3D printed poly lactic acid scaffold for bone tissue engineering application. https://app.cochat.ai/papers/10.1016/j.ceramint.2019.10.057
- The paper
- Mondal, S., Nguyen, T. P., Pham, V. H., Hoang, G., Manivasagan, P., Kim, M. H., Nam, S. Y., & Oh, J. (2020). Hydroxyapatite nano bioceramics optimized 3D printed poly lactic acid scaffold for bone tissue engineering application. Ceramics International. https://doi.org/10.1016/j.ceramint.2019.10.057
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.