Influence of filler characteristics on the performance of dental composites: A comprehensive review
Open accessThe DOI matches its Crossref record; 94 of the 94 references it cites were found in a registry or an index.
Abstract
In restorative dentistry, dental composites have become a popular material of choice due to the increasing aesthetic demands and address challenges like recurrent cavities and restorative bulk fracture, which are the most common causes of dental composite failure. To address these issues, various types and shapes of reinforcement fillers were researched to enhance the mechanical properties of composite formulations over conventional composites. Furthermore, antibacterial agents and ion-releasing fillers are used to prevent secondary caries and promote the remineralisation of dental tissue. This review article aims to review the literature of dental resin composites, focusing on various filler categories and their impact on the materials' performance, to aid future development of dental resin composites for clinical applications with optimal properties that can overcome current limitations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
Selwitz, R. H., Ismail, A. I., & Pitts, N. B. (2007) · The Lancet · doi:10.1016/s0140-6736(07)60031-2 · Cited by 2,617 · cited 1×
“Acidic by-products from bacterial metabolism of dietary carbohydrates, predominantly produced by S. mutans, are the primary cause of dental caries [123,124].”
BackgroundResin composite—State of the art
Ferracane, J. L. (2011) · Dental Materials · doi:10.1016/j.dental.2010.10.020 · Cited by 2,188 · cited 3×
“The addition of these fillers resulted in a significant enhancement in properties when compared to unfilled acrylic materials, especially improved compressive strength, hardness, and elastic modulus, and noticeable declines in polymerisation shrinkage and thermal expansion [59].”
BackgroundInfluentialLongevity of posterior composite restorations: Not only a matter of materials
Demarco, F. F., Corrêa, M. B., Cenci, M. S., Moraes, R. R., & Opdam, N. J. M. (2012) · Dental Materials · doi:10.1016/j.dental.2011.09.003 · Cited by 1,020
Resin composites in dentistry: the monomer systems
Peutzfeldt, A. (1997) · European Journal of Oral Sciences · doi:10.1111/j.1600-0722.1997.tb00188.x · Cited by 1,001 · cited 2×
“It is pertinent to mention here that in literature, the term Dental Composite is commonly referred as Resin Based Dental Composites, Composite Resin and/or Polymer Dental Composites [34].”
BackgroundWiegand, A., Buchalla, W., & Attin, T. (2007) · Dental Materials · doi:10.1016/j.dental.2006.01.022 · Cited by 909 · cited 1×
“Anti-caries composites were developed with antibacterial and remineralising activities to control oral biofilm formation and prevent recurrent caries [122,131 – 136].”
BackgroundLongevity of Posterior Composite Restorations: A Systematic Review and Meta-analysis
Opdam, N. J. M., van de Sande, F. H., Bronkhorst, E., Cenci, M. S., Bottenberg, P., Pallesen, U., Gaengler, P., Lindberg, A., Huysmans, M. C. D. N. J. M., & van Dijken, J. W. (2014) · Journal of Dental Research · doi:10.1177/0022034514544217 · Cited by 725 · cited 1×
“The progression of these micro-cracks might ultimately result in material failure [13,164].”
BackgroundTuson, H. H., & Weibel, D. B. (2013) · Soft Matter · doi:10.1039/c3sm27705d · Cited by 720 · cited 1×
“…resistance, and lack of ion release which could enhance the biocompatibility, however, their effect should only impact the pathogenic bacteria where some investigations indicated that non-pathogenic species and mammalian cells might be negatively affected leading to inflammatory reactions [163].”
BackgroundReinforcing Epoxy Polymer Composites Through Covalent Integration of Functionalized Nanotubes
Zhu, J., Peng, H., Rodríguez-Macías, F. J., Margrave, J. L., Khabashesku, V. N., Imam, A. M., Lozano, K., & Barrera, E. V. (2004) · Advanced Functional Materials · doi:10.1002/adfm.200305162 · Cited by 654 · cited 1×
“The impact of fibre/nano-fibres [79,82,84], nanotubes [85,86] and whiskers [87,88] on the efficiency of dental composites has been widely studied in literature and known to have enhanced mechanical properties.”
BackgroundDegradation, Fatigue, and Failure of Resin Dental Composite Materials
Drummond, J. L. (2008) · Journal of Dental Research · doi:10.1177/154405910808700802 · Cited by 602 · cited 1×
“…of inadequate degree of conversion [15], stresses resulting from the poly-merisation shrinkage [16,17], high surface affinity to bacterial biofilm formation [18], low fracture toughness [19,20], and high-water sorption and solubility [21 – 24], affect the longevity of dental resin composites.”
BackgroundWater sorption/solubility of dental adhesive resins
Malacarne, J., Carvalho, R. M., de Goes, M. F., Svizero, N., Pashley, D. H., Tay, F. R., Yiu, C. K., & Carrilho, M. R. D. O. (2006) · Dental Materials · doi:10.1016/j.dental.2005.11.020 · Cited by 595 · cited 1×
“…of inadequate degree of conversion [15], stresses resulting from the poly-merisation shrinkage [16,17], high surface affinity to bacterial biofilm formation [18], low fracture toughness [19,20], and high-water sorption and solubility [21 – 24], affect the longevity of dental resin composites.”
BackgroundElectrospun nanofiber reinforced composites: a review
Jiang, S., Chen, Y., Duan, G., Mei, C., Greiner, A., & Agarwal, S. (2018) · Polymer Chemistry · doi:10.1039/c8py00378e · Cited by 560 · cited 2×
“There are several chemical compositions of nanotubes such as Kaolinite nanotubes [93], and carbon nanotubes were the most widely explored [31].”
BackgroundDental Caries: The Disease and its Clinical Management
Watts, A. (2004) · European Journal of Dental Education · doi:10.1111/j.1600-0579.2004.00341.x · Cited by 474
Beyth, N., Yudovin-Farber, I., Bahir, R., Domb, A. J., & Weiss, E. I. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.03.003 · Cited by 470
Clinical challenges and the relevance of materials testing for posterior composite restorations
Sarrett, D. C. (2005) · Dental Materials · doi:10.1016/j.dental.2004.10.001 · Cited by 453 · cited 1×
“The progression of these micro-cracks might ultimately result in material failure [13,164].”
BackgroundAntibacterial properties of resin composites and dentin bonding systems
Imazato, S. (2003) · Dental Materials · doi:10.1016/s0109-5641(02)00102-1 · Cited by 447 · cited 2×
“Methacryloyloxydo decyl pyr-imidinium bromide (MDBP) has received the most attention among antibacterial quaternary ammonium (QA) compounds [27,154,155] and because of the colour instability of MDBP, it is often used for repairs when appearance is not a factor.”
BackgroundAnterior composite restorations: A systematic review on long-term survival and reasons for failure
Demarco, F. F., Collares, K., Coelho-de-Souza, F. H., Correa, M. B., Cenci, M. S., Moraes, R. R., & Opdam, N. J. M. (2015) · Dental Materials · doi:10.1016/j.dental.2015.07.005 · Cited by 422 · cited 1×
“Although the current restorative composites have superior mechanical and physical properties compared to classic composites [5 – 7] they have an average duration of just under ten years [8], after which professional intervention may be required [1,9 – 14].”
BackgroundAntibacterial activity of dental composites containing zinc oxide nanoparticles
Aydin Sevinç, B., & Hanley, L. (2010) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31620 · Cited by 422 · cited 2×
“Because of the antibacterial effect and satisfactory properties of ZnO, it proved to be an effective antibacterial filler that could be used in dental composites as secondary fillers in minimal amount [149,150,152].”
BackgroundGajewski, V. E. S., Pfeifer, C. S., Fróes-Salgado, N. R. G., Boaro, L. C. C., & Braga, R. R. (2012) · Brazilian Dental Journal · doi:10.1590/s0103-64402012000500007 · Cited by 391
Clinical effectiveness of direct class II restorations - a meta-analysis.
Heintze, S. D., & Rousson, V. (2012) · PubMed · doi:10.3290/j.jad.a28390 · Cited by 351 · cited 1×
“According to meta-analyses of resin composite restorations, at least 5% of these restorations were anticipated to experience bulk fracture during 10 years, while 12% will exhibit significant wear [9,12].”
MethodNetwork structure of Bis-GMA- and UDMA-based resin systems
Floyd, C. J. E., & Dickens, S. H. (2006) · Dental Materials · doi:10.1016/j.dental.2005.10.009 · Cited by 340 · cited 1×
“However, it has a high viscosity which lowers the degree of conversion [35], and also as a result of this high viscosity of BisGMA, incorporating fillers to reinforce of enhance physical and mechanical properties proves to be difficulty [36, 37].”
BackgroundDa Rosa Rodolpho, P. A., Donassollo, T. A., Cenci, M. S., Loguércio, A. D., Moraes, R. R., Bronkhorst, E. M., Opdam, N. J. M., & Demarco, F. F. (2011) · Dental Materials · doi:10.1016/j.dental.2011.06.001 · Cited by 340
Bioactive Glass Applications in Dentistry
Skallevold, H. E., Rokaya, D., Khurshid, Z., & Zafar, M. S. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20235960 · Cited by 335 · cited 3×
“Although the word “ bioactive ” has several meanings, a substance that develops a connection with a tissue [137] and promotes the creation of hydroxyapatite (HA) when it meets physiological fluids [33,137].”
BackgroundAntibacterial quaternary ammonium compounds in dental materials: A systematic review
Makvandi, P., Jamaledin, R., Jabbari, M., Nikfarjam, N., & Borzacchiello, A. (2018) · Dental Materials · doi:10.1016/j.dental.2018.03.014 · Cited by 333 · cited 2×
“Methacryloyloxydo decyl pyr-imidinium bromide (MDBP) has received the most attention among antibacterial quaternary ammonium (QA) compounds [27,154,155] and because of the colour instability of MDBP, it is often used for repairs when appearance is not a factor.”
BackgroundJournal of Dental Research: Now Published by the International Association for Dental Research
Gies, W. J. (1934) · Journal of Dental Research · doi:10.1177/00220345340140020501 · Cited by 321
Tavassoli Hojati, S., Alaghemand, H., Hamze, F., Ahmadian Babaki, F., Rajab-Nia, R., Rezvani, M. B., Kaviani, M., & Atai, M. (2013) · Dental Materials · doi:10.1016/j.dental.2013.03.011 · Cited by 305 · cited 1×
“Because of the antibacterial effect and satisfactory properties of ZnO, it proved to be an effective antibacterial filler that could be used in dental composites as secondary fillers in minimal amount [149,150,152].”
BackgroundLongevity of posterior resin composite restorations in adults – A systematic review
Ástvaldsdóttir, Á., Dagerhamn, J., van Dijken, J. W. V., Naimi-Akbar, A., Sandborgh-Englund, G., Tranæus, S., & Nilsson, M. (2015) · Journal of Dentistry · doi:10.1016/j.jdent.2015.05.001 · Cited by 305 · cited 1×
“Although the current restorative composites have superior mechanical and physical properties compared to classic composites [5–7] they have an average duration of just under ten years [8], after which professional intervention may be required [1,9–14].”
BackgroundAnti‐plaque agents in the prevention of biofilm‐associated oral diseases
Baehni, P., & Takeuchi, Y. (2003) · Oral Diseases · doi:10.1034/j.1601-0825.9.s1.5.x · Cited by 285 · cited 1×
“To control the growth of oral biofilms and prevent the formation of plaque, traditional mechanical oral hygiene measures such as tooth brushing, mouth rinsing, and flossing are required [127].”
BackgroundIMAZATO, S. (2009) · Dental Materials Journal · doi:10.4012/dmj.28.11 · Cited by 283 · cited 1×
“Methacryloyloxydo decyl pyr-imidinium bromide (MDBP) has received the most attention among antibacterial quaternary ammonium (QA) compounds [27,154,155] and because of the colour instability of MDBP, it is often used for repairs when appearance is not a factor.”
BackgroundHigh-aspect ratio fillers: Fiber-reinforced composites and their anisotropic properties
Vallittu, P. K. (2015) · Dental Materials · doi:10.1016/j.dental.2014.07.009 · Cited by 249 · cited 3×
“The mechanical characteristics of the fibre resin composite are influenced by the fiber ’ s type, length, orientation, and volume percentage [82].”
BackgroundA review of dental composites: Challenges, chemistry aspects, filler influences, and future insights
Aminoroaya, A., Neisiany, R. E., Khorasani, S. N., Panahi, P., Das, O., Madry, H., Cucchiarini, M., & Ramakrishna, S. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108852 · Cited by 242 · cited 1×
“Conventional dental fillers are usually spherical, irregular granules or particles and can detach from the resin matrix during long-term service [80].”
BackgroundNanoparticles for Oral Biofilm Treatments
Benoit, D. S. W., Sims, K. R., & Fraser, D. (2019) · ACS Nano · doi:10.1021/acsnano.9b02816 · Cited by 231 · cited 1×
“Oral biofilm is responsible for causing different types of infections in the mouth such as dental caries [125], gingivitis and periodontitis, and candidosis [126].”
BackgroundSurface Roughness of Nanofill and Nanohybrid Resin Composites after Polishing and Brushing
SENAWONGSE, P., & PONGPRUEKSA, P. (2007) · Journal of Esthetic and Restorative Dentistry · doi:10.1111/j.1708-8240.2007.00116.x · Cited by 221 · cited 1×
“The addition of PPRF also decreases the polymer-isation shrinkage and improves polish ability when compared to conventionally filled resin composites [65,66].”
BackgroundAmirouche-Korichi, A., Mouzali, M., & Watts, D. C. (2009) · Dental Materials · doi:10.1016/j.dental.2009.06.009 · Cited by 216 · cited 4×
“…properties, the multifactorial interaction of inadequate degree of conversion [15], stresses resulting from the poly-merisation shrinkage [16,17], high surface affinity to bacterial biofilm formation [18], low fracture toughness [19,20], and high-water sorption and solubility [21 – 24],…”
BackgroundInfluentialGonçalves, F., Kawano, Y., Pfeifer, C., Stansbury, J. W., & Braga, R. R. (2009) · European Journal of Oral Sciences · doi:10.1111/j.1600-0722.2009.00636.x · Cited by 215 · cited 1×
“However, it has a high viscosity which lowers the degree of conversion [35], and also as a result of this high viscosity of BisGMA, incorporating fillers to reinforce of enhance physical and mechanical properties proves to be difficulty [36, 37].”
BackgroundInorganic Fillers for Dental Resin Composites: Present and Future
Habib, E., Wang, R., Wang, Y., Zhu, M., & Zhu, X. X. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00401 · Cited by 189 · cited 5×
“Whiskers on the other hand have the lowest aspect ratios within fibrous fillers and are generally rigid [29,31,89].”
BackgroundMethodInfluentialBisGMA/TEGDMA ratio and filler content effects on shrinkage stress
Gonçalves, F., Azevedo, C. L. N., Ferracane, J. L., & Braga, R. R. (2011) · Dental Materials · doi:10.1016/j.dental.2011.01.007 · Cited by 185 · cited 1×
“…of enhancing poly-merisation shrinkage, as it has been proven that increasing the concentration of TEGDMA causes greater polymerisation shrinking and higher contraction stress which could be due to adding lower molecular weight monomers leading to a greater conversion per unit volume [39 – 41].”
BackgroundFeilzer, A. J., & Dauvillier, B. S. (2003) · Journal of Dental Research · doi:10.1177/154405910308201012 · Cited by 184 · cited 1×
“…of enhancing poly-merisation shrinkage, as it has been proven that increasing the concentration of TEGDMA causes greater polymerisation shrinking and higher contraction stress which could be due to adding lower molecular weight monomers leading to a greater conversion per unit volume [39 – 41].”
BackgroundSamuel, S. P., Li, S., Mukherjee, I., Guo, Y., Patel, A. C., Baran, G., & Wei, Y. (2009) · Dental Materials · doi:10.1016/j.dental.2008.07.012 · Cited by 175
Are fluoride releasing dental materials clinically effective on caries control?
Cury, J. A., de Oliveira, B. H., dos Santos, A. P. P., & Tenuta, L. M. A. (2016) · Dental Materials · doi:10.1016/j.dental.2015.12.002 · Cited by 175
Cocco, A. R., da Rosa, W. L. D. O., da Silva, A. F., Lund, R. G., & Piva, E. (2015) · Dental Materials · doi:10.1016/j.dental.2015.08.155 · Cited by 174 · cited 1×
“When the antibacterial monomer is copolymerized with the resin, it prevents the bacterial growth on the composite surface during contact [153].”
BackgroundBeck, F., Lettner, S., Graf, A., Bitriol, B., Dumitrescu, N., Bauer, P., Moritz, A., & Schedle, A. (2015) · Dental Materials · doi:10.1016/j.dental.2015.05.004 · Cited by 168 · cited 2×
“According to meta-analyses of resin composite restorations, at least 5% of these restorations were anticipated to experience bulk fracture during 10 years, while 12% will exhibit significant wear [9,12].”
BackgroundMethodda Veiga, A. M. A., Cunha, A. C., Ferreira, D. M. T. P., da Silva Fidalgo, T. K., Chianca, T. K., Reis, K. R., & Maia, L. C. (2016) · Journal of Dentistry · doi:10.1016/j.jdent.2016.08.003 · Cited by 166 · cited 1×
“Although the current restorative composites have superior mechanical and physical properties compared to classic composites [5 – 7] they have an average duration of just under ten years [8], after which professional intervention may be required [1,9 – 14].”
BackgroundCurtis, A. R., Palin, W. M., Fleming, G. J. P., Shortall, A. C. C., & Marquis, P. M. (2009) · Dental Materials · doi:10.1016/j.dental.2008.06.003 · Cited by 165 · cited 1×
“When compared to micro fill or nanohybrid systems, nanoclusters provide a unique reinforcing mechanism, resulting in considerable enhancement in strength [69].”
BackgroundBisGMA/TEGDMA dental composite containing high aspect-ratio hydroxyapatite nanofibers
Chen, L., Yu, Q., Wang, Y., & Li, H. (2011) · Dental Materials · doi:10.1016/j.dental.2011.08.403 · Cited by 162 · cited 3×
“Fibre-reinforced polymers composites have widespread applications in other sectors such as aerospace, automotive, space, construction to name a few [81 – 84].”
BackgroundProperties of a Dental Resin Composite with a Spherical Inorganic Filler
Lu, H., Lee, Y. K., Oguri, M., & Powers, J. M. (2006) · Operative Dentistry · doi:10.2341/05-154 · Cited by 153
Wu, J., Weir, M. D., Melo, M. A. S., & Xu, H. H. K. (2015) · Journal of Dentistry · doi:10.1016/j.jdent.2015.01.009 · Cited by 144 · cited 3×
“With the potential toxicity and the expensive cost of the dicyclopentadine and Grubb ’ s catalysts systems, attempts to replace these were made [169].”
BackgroundAn update on glass fiber dental restorative composites: A systematic review
Khan, A. S., Azam, M. T., Khan, M., Mian, S. A., & Rehman, I. U. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.11.015 · Cited by 144 · cited 5×
“S-glass is more expensive and has a shorter life-span than E-glass, and it also has higher tensile strength (4700 – 4800 MPa) and elastic modulus (86 – 93 GPa) compared to E-glass of tensile strength (1950 – 2050 MPa) and elastic modulus (72 – 85 GPa) [79,90, 95].”
BackgroundMethodInfluentialLow shrinkage light curable nanocomposite for dental restorative material
Chen, M., Chen, C.-R., Hsu, S.-H., Sun, S.-P., & Su, W. (2005) · Dental Materials · doi:10.1016/j.dental.2005.02.012 · Cited by 144 · cited 1×
“…have been presented and investigated to improve the qualities of dental composite materials, including the production of low shrinkage monomers, to meet the issues [25,26], monomers with antibacterial activity [27], and different mechanisms of free radical chain developing polymerisation [28].”
BackgroundFunctional fillers for dental resin composites
Wang, Y., Zhu, M., & Zhu, X. X. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.001 · Cited by 144 · cited 4×
“Whiskers on the other hand have the lowest aspect ratios within fibrous fillers and are generally rigid [29,31,89].”
BackgroundMethodInfluentialEffect of novel filler particles on the mechanical and wear properties of dental composites
Ruddell, D. E., Maloney, M. M., & Thompson, J. Y. (2002) · Dental Materials · doi:10.1016/s0109-5641(01)00022-7 · Cited by 141 · cited 2×
“Inadequate infiltration of the resin matrix into the filler porosity results in poor mechanical properties especially flexural strength compared to the conventional silica filled composites [115], as the unfilled porosity behave as voids resulting in weak zones in the structure of the composite.”
BackgroundMethodCazzaniga, G., Ottobelli, M., Ionescu, A. C., Garcı́a-Godoy, F., & Brambilla, E. (2015) · PubMed · Cited by 131
Insight into Oral Biofilm: Primary, Secondary and Residual Caries and Phyto-Challenged Solutions
Chenicheri, S., Usha, R., Ramachandran, R., Thomas, V., & Wood, A. T. (2017) · The Open Dentistry Journal · doi:10.2174/1874210601711010312 · Cited by 130 · cited 2×
“Oral biofilm consists of colonies of different microbial species incorporated in a medium of microbial components, salivary proteins, and food debris [125].”
BackgroundNano DCPA-Whisker Composites with High Strength and Ca and PO4 Release
Xu, H. H. K., Sun, L., Weir, M. D., Antonucci, J. M., Takagi, S., Chow, L. C., & Peltz, M. (2006) · Journal of Dental Research · doi:10.1177/154405910608500807 · Cited by 128 · cited 3×
“5) [98] (see Fig.”
BackgroundMethodInfluentialEltouby, P., Shyha, I., Li, C., & Khaliq, J. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.03.126 · Cited by 127 · cited 1×
“However, the most significant enhancements and changes have been in the fillers such as size reduction, shape enhancement (platelike, rods, nanoparticles), functionalisation [29 – 32], and bioactive ability [33] to suit the demands of dentists.”
BackgroundSelf-citationNovel rechargeable calcium phosphate dental nanocomposite
Zhang, L., Weir, M. D., Chow, L. C., Antonucci, J. M., Chen, J., & Xu, H. H. K. (2015) · Dental Materials · doi:10.1016/j.dental.2015.11.015 · Cited by 125 · cited 4×
“Dental composites tend to accumulate a greater biofilm thickness than other types of restorative filling materials such as glass ionomers and amalgams [128].”
BackgroundMethodInfluentialThe use of bioactive glass (BAG) in dental composites: A critical review
Tiskaya, M., Shahid, S., Gillam, D. G., & Hill, R. G. (2021) · Dental Materials · doi:10.1016/j.dental.2020.11.015 · Cited by 120 · cited 4×
“Although the word “ bioactive ” has several meanings, a substance that develops a connection with a tissue [137] and promotes the creation of hydroxyapatite (HA) when it meets physiological fluids [33,137].”
BackgroundInfluentialSynthesis of Hydroxyapatite Nanopowders via Sucrose‐Templated Sol–Gel Method
Bose, S., & Saha, S. K. (2003) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2003.tb03423.x · Cited by 120 · cited 1×
“Furthermore, in dental restorations may remineralize neighbouring collagen, possibly allowing the sealing of small gaps between dental composites and natural dental tissue, reducing the risk of recurrent caries over time [147].”
BackgroundNano-hydroxyapatite and its contemporary applications
Kantharia, N., Naik, S., Apte, S. K., Kheur, M. G., Kheur, S. M., & Kale, B. B. (2014) · Journal of Dental Research and Scientific Development · doi:10.4103/2348-3407.126135 · Cited by 111 · cited 1×
“As a common bioactive material, hydroxyapatite (HA), with chemical formula Ca 10 (PO 4 ) 3 OH has the potential to be used in biomaterials especially in dental implants and bone replacement materials [88,145,146].”
BackgroundEffects of Calcium Phosphate Nanoparticles on Ca-PO 4 Composite
Xu, H. H. K., Weir, M. D., Sun, L., Takagi, S., & Chow, L. C. (2007) · Journal of Dental Research · doi:10.1177/154405910708600415 · Cited by 110 · cited 2×
“This can be resolved by adding a co-filler with Ca 3 (PO 4 ) 2 filler such as nano-silica fused silicon carbide whiskers and Dimethyl tetrachloroterephthalate (DCPA) nanoparticles [143,144].”
BackgroundSurface Properties of Resin Composite Materials Relative to Biofilm Formation
Ono, M., Nikaido, T., Ikeda, M., Imai, S., Hanada, N., Tagami, J., & Matin, K. (2007) · Dental Materials Journal · doi:10.4012/dmj.26.613 · Cited by 106 · cited 2×
“The increased levels of biofilm accumulation could have an impact on more caries development [18, 130].”
BackgroundInfluence of matrix composition on polymerization stress development of experimental composites
Gonçalves, F., Pfeifer, C. S., Stansbury, J. W., et al. (2010) · Dental Materials · doi:10.1016/j.dental.2010.03.014 · Cited by 105
Wu, X., & Yarin, A. L. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39282 · Cited by 103
Design and development of self-healing dental composites
Huyang, G., Debertin, A. E., & Sun, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.046 · Cited by 99 · cited 2×
“When the dicyclo-pentadine contacts the catalyst distributed in the matrix, the polymerisation process occurs as a result of capillary action and the dicyclopentadine ’ s penetration along the crack [166].”
BackgroundAntibacterial dental resin composites
Beyth, N., Farah, S., Domb, A. J., & Weiss, E. I. (2013) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2013.11.011 · Cited by 97 · cited 1×
“The novel bioactive composites containing 40 wt% of BG fillers after 28 days of PBS immersion showed the ability to form fluorapatite in the calcium phosphate precipitated on the composite surface, unlike conventional BAG composite [132].”
BackgroundAl‐Dulaijan, Y. A., Cheng, L., Weir, M. D., Melo, M. A. S., Liu, H., Oates, T. W., Wang, L., & Xu, H. H. K. (2018) · Journal of Dentistry · doi:10.1016/j.jdent.2018.03.003 · Cited by 96 · cited 7×
“Chen developed ZnO@m-SiO 2 nanoparticles by coating ZnO particles with mesoporous SiO 2 [122].”
BackgroundMethodInfluentialMontoya, C., Jain, A., Londoño, J. J., Correa, S., Lelkes, P. I., Melo, M. A. S., & Orrego, S. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06331 · Cited by 89 · cited 2×
“Moreover, the antibacterial activity of BAG-(10, 20, and 30% vol) Sodium Potassium Niobate (NKN) composites against S. aureus and E. coli bacterial cells was enhanced on poled composite samples at 20 kV for 30 min at 500 ◦ C [160,161].”
BackgroundMethodOptical behavior of dental zirconia and dentin analyzed by Kubelka–Munk theory
Pecho, Ó. E., Ghinea, R. I., Ionescu, A. M., Cardona, J. D. L. C., Bona, Á. D., & Gómez, M. D. M. P. (2014) · Dental Materials · doi:10.1016/j.dental.2014.11.012 · Cited by 88 · cited 1×
“Additionally, ZrO 2 also has outstanding biocompatibility physical and mechanical properties making it a widespread an excellent choice in the field of dental materials [177 – 179].”
BackgroundSchmitz, S. I., Widholz, B., Essers, C., Becker, M., Tulyaganov, D. U., Moghaddam, A., Gonzalo‐Juan, I., & Westhauser, F. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.005 · Cited by 86 · cited 1×
“As a result, most BAG fillers are now low in sodium [140].”
BackgroundStrong and bioactive composites containing nano-silica-fused whiskers for bone repair
Xu, H. H. K., Smith, D. T., & Simon, C. G. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.12.058 · Cited by 86 · cited 1×
“In vitro, the whisker composites were biocompatible and promoted cell proliferation and survival [102].”
BackgroundAguiar, F. H. B., Braceiro, A., Ambrosano, G. M. B., & Lovadino, J. R. (2005) · Dental Materials · doi:10.1016/j.dental.2004.11.010 · Cited by 85
Zhang, N., Melo, M. A. S., Weir, M. D., Reynolds, M. A., Bai, Y., & Xu, H. H. K. (2016) · Materials · doi:10.3390/ma9110888 · Cited by 77 · cited 1×
“However, some studies reported that bacterial growth was increased with composite restorations, which could be an intrinsic characteristic adversely affecting the ecosystem of the dental plaque biofilm [129,130].”
BackgroundJAKUBIAK, J., Sionkowska, A., Lindén, L., & Rabek, J. F. (2001) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/a:1012424918321 · Cited by 66 · cited 1×
“icate particles derived from barium oxide, strontium oxide, zinc oxide, aluminium oxide, or zirconium oxide, with typical filler percentage in the range of 50–80% by weight and particle size varies in the range of 5 nm to 85 μm [46,47].”
BackgroundArun, D., Mudiyanselage, D. A., Mohamed, R. G., Liddell, M. J., Hassan, N. M. M., & Sharma, D. (2020) · Materials · doi:10.3390/ma14010040 · Cited by 55 · cited 2×
“Because of the antibacterial effect and satisfactory properties of ZnO, it proved to be an effective antibacterial filler that could be used in dental composites as secondary fillers in minimal amount [149,150,152].”
BackgroundLiang, K., Weir, M. D., Reynolds, M. A., Zhou, X., Li, J., & Xu, H. H. K. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.11.020 · Cited by 55 · cited 1×
“Because it is metastable and can spontaneously convert to hydroxyapatite (HA), P 2 O 74 (cid:0) is added as a stabiliser during synthesis [141, 142].”
BackgroundMicrostructural Features of Current Resin Composite Materials
Ferracane, J. L., Pfeifer, C. S., & Hilton, T. J. (2014) · Current Oral Health Reports · doi:10.1007/s40496-014-0029-4 · Cited by 51 · cited 1×
“The addition of PPRF also decreases the polymer-isation shrinkage and improves polish ability when compared to conventionally filled resin composites [65,66].”
Backgroundda Silva, E. M., Gonçalves, L., Guimarães, J. G. A., Poskus, L. T., & Fellows, C. E. (2010) · Clinical Oral Investigations · doi:10.1007/s00784-010-0392-z · Cited by 51
Influence of nanometer scale particulate fillers on some properties of microfilled composite resin
Garoushi, S. K., Lassila, L. V. J., & VALLITTU, P. K. (2011) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-011-4352-1 · Cited by 43 · cited 2×
“The addition of fillers to the polymer matrix improves fracture toughness, elastic modulus, and tensile strength [30,51,71,72].”
BackgroundMontagner, A. F., van de Sande, F. H., Müller, C., Cenci, M. S., & Susin, A. H. (2018) · Brazilian Dental Journal · doi:10.1590/0103-6440201802192 · Cited by 42
Ning, K., Loomans, B. A. C., Yeung, C., Li, J., Yang, F., & Leeuwenburgh, S. C. G. (2021) · Dental Materials · doi:10.1016/j.dental.2020.11.025 · Cited by 40 · cited 1×
“Following that, a polymer layer serves as an adhesive, reat-taching the split regions [167 – 169].”
BackgroundYang, D., Cui, Y., Sun, Q., Liu, M., Niu, H., & Wang, J. (2020) · Biomaterials Science · doi:10.1039/d0bm01834a · Cited by 39 · cited 1×
“%) and satisfactory depth of cure, degree of conversion, and biocompatibility [151].”
BackgroundVerma, A. S., Sharma, A., Kumar, A., Mukhopadhyay, A., Kumar, D., & Dubey, A. K. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00642 · Cited by 36 · cited 1×
“Moreover, the antibacterial activity of BAG-(10, 20, and 30% vol) Sodium Potassium Niobate (NKN) composites against S. aureus and E. coli bacterial cells was enhanced on poled composite samples at 20 kV for 30 min at 500 ◦ C [160,161].”
BackgroundDevelopment of an oxirane/acrylate interpenetrating polymer network (IPN) resin system
Danso, R., Hoedebecke, B., Whang, K., Sarrami, S., Johnston, A. D., Flipse, S., Wong, N., & Rawls, H. R. (2018) · Dental Materials · doi:10.1016/j.dental.2018.06.013 · Cited by 36 · cited 1×
“F. Elfakhri et al. containing BisGMA such as oxiranes [43], dendrimers, isorsorbides and more [44].”
BackgroundLiang, K., Gao, Y., Xiao, S., Tay, F. R., Weir, M. D., Zhou, X., Oates, T. W., Zhou, C., Li, J., & Xu, H. H. K. (2019) · Journal of Dentistry · doi:10.1016/j.jdent.2019.04.011 · Cited by 30 · cited 1×
“Because it is metastable and can spontaneously convert to hydroxyapatite (HA), P 2 O 74 (cid:0) is added as a stabiliser during synthesis [141, 142].”
BackgroundSeifan, M., Sarabadani, Z., & Berenjian, A. (2020) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-019-10345-9 · Cited by 29
Bauer, J. A., Gruninger, S. E., Chou, H., Weuve, J., Turyk, M. E., Freels, S. A., & Stayner, L. T. (2015) · The Journal of the American Dental Association · doi:10.1016/j.adaj.2015.05.016 · Cited by 28 · cited 1×
“…mercury which makes up about 50% of the total composition in commercially available amalgam fillings, clinicians and dentists have raised concerns as it can be difficult to isolate the cause when people develop health problems such as an increase in the risk of tremors in practicing dentists [4].”
BackgroundHuang, Z., Qi, Y., Zhang, K., Gu, L., Guo, J., Wang, R., & Mai, S. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.09.008 · Cited by 28 · cited 1×
“Several types of elements with heavy atoms are added as opaci-fying components such as BaSO 4 , La 2 O 3 , or ZrO 2 , where these atoms can enhance the radiopacity by absorbing and then scattering the X-ray [171,173].”
BackgroundSun, C., Xu, D., Hou, C., Zhang, H., Li, Y., Zhang, Q., Wang, H., & Zhu, M. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104593 · Cited by 27 · cited 2×
“…as secondary fillers and resulted in a great improvement of the radiopacity at 20% SZS with 52% silica which exceeded the radiopacity of the enamel as well as showed lower shrinkage and enhanced mechanical properties compared to the composites filled with mono-dispersed silica microspheres [176].”
BackgroundResin composites : Sandwich restorations and curing techniques
Lindberg, A. O. (2005) · DiVA at Umeå University (Umeå University) · Cited by 22
Bioactive dental composite materials
Tarle, Z., & Par, M. (2018) · Rad Hrvatske akademije znanosti i umjetnosti Medicinske znanosti · doi:10.21857/mnlqgc02ky · Cited by 20 · cited 2×
“When dental composites containing BAGs are exposed to a moist environment, their mechanical properties can be compromised as BAGs tend to cluster in the hydrophobic resin matrix due to their hydrophilicity resulting in swelling and cracking [121].”
BackgroundEffect of short glass fibers on the polymerization shrinkage stress of dental composite
Shouha, P., & Ellakwa, A. E. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33723 · Cited by 20 · cited 1×
“Reproduced with permission of the rights holder, John Wiley and Sons [96].”
MethodSynthesis and Characterization of New Antibacterial Fluoride-Releasing Monomer and Dental Composite
Wang, Y., Samoei, G. K., Lallier, T. E., & Xu, X. (2012) · ACS Macro Letters · doi:10.1021/mz300579y · Cited by 18
Pasha, M., Muhammad, N., Nayyer, M., Bukhari, J. H., Ashraf, H., Safi, S. Z., & Kaleem, M. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111040 · Cited by 12 · cited 1×
“A study investigated the anticariogenic efficacy of drug-coated copper nanoparticles used as an antibacterial filler in a light cures resin composite [158].”
BackgroundIonic Dimethacrylates for Antimicrobial and Remineralizing Dental Composites.
Bienek, D. R., Frukhtbeyn, S. A., Giuseppetti, A. A. M., Okeke, U., Pires, R., Antonucci, J. M., & Škrtić, D. (2018) · PubMed · Cited by 8
Metadata
- Authors
- Elfakhri, F., Alkahtani, R., Li, C., & Khaliq, J.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2022-10
- Volume
- 48
- Issue
- 19
- Pages
- 27280-27294
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W4285600308
- Cited by
- 183
- References
- 94
- FWCI
- 33.12
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.