The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Comprehensive systematic review and meta-analysis of dyes adsorption by carbon-based adsorbent materials: Classification and analysis of last decade studies
Abstract
Carbon-based materials and their modifications have received significant attention over the last decades given the outstanding adsorption behavior toward various dyes from aqueous solutions. In this systematic review and meta-analysis, the adsorption capability of dyes on carbon-based adsorbent materials (CBAMs) has been compiled. Further, the effects of process variables i.e., pH, adsorbent dosage, contact time, and initial concentration), adsorption kinetics, and isotherms were investigated while considering the classification of different groups of dyes and adsorbents. The Metafor package provides functions for conducting meta-analyses in R software. Electronic databases, including PubMed, Web of Science, and Scopus were systematically searched based on Medical Subject Headings (MeSH) from January 1, 2009 to May 1, 2018. The following parameters were evaluated according to predetermined inclusion and exclusion criteria. After detailed screening and analysis, 835 articles were eligible for the review section. Among them, 87 studies met all quantitative criteria for the meta-analysis. The meta-analysis was performed using a random-effects model with a high heterogeneity (I2 = 99.99%). According to the evidence, basic dyes with n = 661 (∼50%) and powder activated carbon (PAC) sorbent with n = 752 (∼57%) have received the most attention among researchers. The results revealed that the mean of removal efficiency-based dyes classification was between 79.9 and 93.7% and the adsorption capacity was lied within the range of 76.8-303.6 mg/g. Meanwhile, the maximum adsorption capacity belongs to graphene families with Qm > 320 mg/g, while the minimum Qm was related to G and GAC with capacities of 108.5 and 110.7 mg/g, respectively. Pseudo-second-order kinetic model with 88.7% and Langmuir isotherm with 74% had the best fitting with the data studied. Baujat plot revealed that two studies (ID: 75 and 12) had the minimum influence on adsorption capacity with the highest dffits and cook's distance. According to the pooled data, the mean adsorption capacity varied between 140.90 and 208.25, with a mean of 174.57 mg/g across all studies. The results of Egger's test (t = 0.1332, p = 0.0844) and Begg's test (z = 0.8458, p = 0.3977) were not statistically significant, suggesting that no potential publication bias existed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Liu, L., Bilal, M., Duan, X., & Iqbal, H. M. N. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.02.390 · Cited by 318
RetractedNon-conventional low-cost adsorbents for dye removal: A review
CRINI, G. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.05.001 · Cited by 4,508
Verma, A. K., Dash, R. R., & Bhunia, P. (2012) · Journal of Environmental Management · doi:10.1016/j.jenvman.2011.09.012 · Cited by 1,996
Adsorptive removal of dyes from aqueous solution onto carbon nanotubes: A review
Gupta, V. K., Kumar, R., Nayak, A., Saleh, T. A., & Barakat, M. A. (2013) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2013.03.003 · Cited by 1,253
dos Santos, A. B., Cervantes, F. J., & van Lier, J. B. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2006.11.013 · Cited by 1,155
Graphene and graphene oxide as effective adsorbents toward anionic and cationic dyes
Ramesha, G. K., Vijaya Kumara, A., Muralidhara, H. B., & Sampath, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.05.050 · Cited by 1,119
Gong, J.-L., Wang, B., Zeng, G.-M., Yang, C.-P., Niu, C.-G., Niu, Q.-Y., Zhou, W.-J., & Liang, Y. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.09.072 · Cited by 1,057
Agricultural based activated carbons for the removal of dyes from aqueous solutions: A review
Demirbas, A. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.12.114 · Cited by 788
Singh, K., & Arora, S. (2011) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643380903218376 · Cited by 675
Removal of colorants from wastewater: A review on sources and treatment strategies
Pavithra, K. G., P., S. K., V., J., & P., S. R. (2019) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2019.02.011 · Cited by 634
Graphene based adsorbents for remediation of noxious pollutants from wastewater
Ali, I., Basheer, A. A., Mbianda, X. Y., Burakov, A., Galunin, E., Burakova, I., Mkrtchyan, E., Tkachev, A., & Grachev, V. (2019) · Environment International · doi:10.1016/j.envint.2019.03.029 · Cited by 524
New generation nano-adsorbents for the removal of emerging contaminants in water
Basheer, A. A. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.04.021 · Cited by 494
Production and applications of activated carbons as adsorbents from olive stones
Saleem, J., Shahid, U. B., Hijab, M., Mackey, H., & McKay, G. (2019) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-019-00473-7 · Cited by 483
Hadi, P., Xu, M., Ning, C., Sze Ki Lin, C., & McKay, G. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.088 · Cited by 421
Basheer, A. A. (2018) · Chirality · doi:10.1002/chir.22808 · Cited by 417
Adsorption of basic dyes from aqueous solution onto activated carbons
El Qada, E. N., Allen, S. J., & Walker, G. M. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.02.023 · Cited by 401
Modeling of fenuron pesticide adsorption on CNTs for mechanistic insight and removal in water
Ali, I., Alharbi, O. M. L., ALOthman, Z. A., Al-Mohaimeed, A. M., & Alwarthan, A. (2019) · Environmental Research · doi:10.1016/j.envres.2018.12.066 · Cited by 374
Singh, K. P., Mohan, D., Sinha, S., Tondon, G. S., & Gosh, D. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020800d · Cited by 348
Somasekhara Reddy, M. C., Sivaramakrishna, L., & Varada Reddy, A. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.11.083 · Cited by 323
Mudunkotuwa, I. A., & Grassian, V. H. (2010) · Journal of the American Chemical Society · doi:10.1021/ja106091q · Cited by 297
Xiao, J., Lv, W., Xie, Z., Tan, Y., Song, Y., & Zheng, Q. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04119a · Cited by 284
Adsorption kinetics of methylene blue dyes onto magnetic graphene oxide
Othman, N. H., Alias, N. H., Shahruddin, M. Z., Abu Bakar, N. F., Nik Him, N. R., & Lau, W. J. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.04.024 · Cited by 283
Zare, K., Gupta, V. K., Moradi, O., Makhlouf, A. S. H., Sillanpää, M., Nadagouda, M. N., Sadegh, H., Shahryari-ghoshekandi, R., Pal, A., Wang, Z.-J., et al. (2015) · Journal of Nanostructure in Chemistry · doi:10.1007/s40097-015-0158-x · Cited by 219
Brilliant Yellow dye adsorption onto sepiolite using a full factorial design
Bingol, D., Tekin, N., & Alkan, M. (2010) · Applied Clay Science · doi:10.1016/j.clay.2010.08.015 · Cited by 210
Asfaram, A., Ghaedi, M., Hajati, S., Goudarzi, A., & Dil, E. A. (2017) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2016.05.011 · Cited by 206
Ali, I., Alharbi, O. M. L., Alothman, Z. A., Badjah, A. Y., Alwarthan, A., & Basheer, A. A. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.11.163 · Cited by 199
Jin, L., Zhao, X., Qian, X., & Dong, M. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.002 · Cited by 190
Rashidi Nodeh, H., Wan Ibrahim, W. A., Ali, I., & Sanagi, M. M. (2016) · Environmental Science and Pollution Research · doi:10.1007/s11356-016-6137-z · Cited by 181
Preparation of a carboxymethylcellulose-iron composite for uptake of atorvastatin in water
Ali, I., Alharbi, O. M. L., ALOthman, Z. A., Alwarthan, A., & Al-Mohaimeed, A. M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.211 · Cited by 176
Ali, I. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.09.021 · Cited by 174
Burakova, E. A., Dyachkova, T. P., Rukhov, A. V., Tugolukov, E. N., Galunin, E. V., Tkachev, A. G., Basheer, A. A., & Ali, I. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.01.062 · Cited by 169
Yegane Badi, M., Azari, A., Pasalari, H., Esrafili, A., & Farzadkia, M. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.04.019 · Cited by 166
Self-citationAli, I., Alharbi, O. M. L., Alothman, Z. A., & Alwarthan, A. (2018) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2018.07.071 · Cited by 165
Liu, L., Zhang, B., Zhang, Y., He, Y., Huang, L., Tan, S., & Cai, X. (2015) · Journal of Chemical & Engineering Data · doi:10.1021/je5009312 · Cited by 163
Kinetic modeling of liquid-phase adsorption of Congo red dye using guava leaf-based activated carbon
Ojedokun, A. T., & Bello, O. S. (2017) · Applied Water Science · doi:10.1007/s13201-015-0375-y · Cited by 162
Arsenite removal from water by electro-coagulation on zinc–zinc and copper–copper electrodes
Ali, I., Asim, M., & Khan, T. A. (2013) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-012-0113-z · Cited by 158
Attouti, S., Bestanı, B., Benderdouche, N., & Duclaux, L. (2013) · Water Research · doi:10.1016/j.watres.2013.03.038 · Cited by 157
Ali, I., ALOthman, Z. A., & Al‐Warthan, A. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.06.005 · Cited by 156
High performance removal and simulation studies of diuron pesticide in water on MWCNTs
Al‐Shaalan, N. H., Ali, I., ALOthman, Z. A., Al-Wahaibi, L. H., & Alabdulmonem, H. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.111039 · Cited by 142
Liu, Y., Zeng, G., Tang, L., Cai, Y., Pang, Y., Zhang, Y., Yang, G., Zhou, Y., He, X., & He, Y. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.02.037 · Cited by 140
Metal ion speciation and capillary electrophoresis: Application in the new millennium
Ali, I., Gupta, V. K., & Aboul-Enein, H. Y. (2005) · Electrophoresis · doi:10.1002/elps.200500216 · Cited by 136
Ai, L., & Li, L. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.03.015 · Cited by 127
Adsorptive Removal of Malachite Green Dye Using Durian Seed-Based Activated Carbon
Ahmad, M. A., Ahmad, N., & Bello, O. S. (2014) · Water Air & Soil Pollution · doi:10.1007/s11270-014-2057-z · Cited by 105
Babaei, A. A., Alavi, S. N., Akbarifar, M., Ahmadi, K., Esfahani, A. R., & Kakavandi, B. (2016) · Desalination and Water Treatment · doi:10.1080/19443994.2016.1163736 · Cited by 105
Zhu, J., Wang, Y., Liu, J., & Zhang, Y. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie502030w · Cited by 101
Priyanka, M., & Saravanakumar, M. P. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.197 · Cited by 92
Kalantary, R. R., Jafari, A. J., Esrafili, A., Kakavandi, B., Gholizadeh, A., & Azari, A. (2015) · Desalination and Water Treatment · doi:10.1080/19443994.2015.1011705 · Cited by 91
Self-citationRibeiro, R. S., Fathy, N. A., Attia, A. A. M., Silva, A. M. T., Faria, J. L., & Gomes, H. T. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.04.065 · Cited by 88
Kalantary, R. R., Dehghanifard, E., Mohseni-Bandpei, A., Rezaei, L., Esrafili, A., Kakavandi, B., & Azari, A. (2015) · Desalination and Water Treatment · doi:10.1080/19443994.2015.1079251 · Cited by 85
Self-citationGao, Y., Xu, S., Yue, Q., Wu, Y., & Gao, B. (2016) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.12.023 · Cited by 78
Mesdaghinia, A., Azari, A., Nabizadeh, R., Yaghmaeian, K., Bharti, A. K., Agarwal, S., Gupta, V. K., & Sharafi, K. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.02.094 · Cited by 78
Self-citationStarch-derived carbon aerogels with high-performance for sorption of cationic dyes
Chang, X., Chen, D., & Jiao, X. (2010) · Polymer · doi:10.1016/j.polymer.2010.06.018 · Cited by 72
Lv, L., Huang, Y., & Cao, D. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.06.116 · Cited by 67
Baziar, M., Azari, A., Karimaei, M., Gupta, V. K., Agarwal, S., Sharafi, K., Maroosi, M., Shariatifar, N., & Dobaradaran, S. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.06.014 · Cited by 65
Self-citationKundu, S., Chowdhury, I. H., & Naskar, M. K. (2018) · ACS Omega · doi:10.1021/acsomega.8b01252 · Cited by 57
Özbay, İ., Özdemir, U., Özbay, B., & Veli, S. (2013) · Desalination and Water Treatment · doi:10.1080/19443994.2013.763387 · Cited by 50
Magnetite decorated multi-walled carbon nanotubes for removal of toxic dyes from aqueous solutions
Kuyumcu, Ö. K., & Bayazit, Ş. S. (2014) · Journal of Nanoparticle Research · doi:10.1007/s11051-014-2431-1 · Cited by 50
Sahu, T. K., Arora, S., Banik, A., Iyer, P. K., & Qureshi, M. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00632 · Cited by 50
KOH catalysed preparation of activated carbon aerogels for dye adsorption
Ling, S. K., Tian, H., Wang, S., Rufford, T. E., Zhu, Z., & Buckley, C. E. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.01.092 · Cited by 49
Khosravi, R., Eslami, H., Zarei, A., Heidari, M., Baghani, A. N., Safavi, N., Mokammel, A., Fazlzadeh, M., & Adhami, S. (2018) · Desalination and Water Treatment · doi:10.5004/dwt.2018.22577 · Cited by 46
Arsalani, N., Nasiri, R., & Zarei, M. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2018.06.024 · Cited by 44
Application of Ni-doped ZnO rods for the degradation of an azo dye from aqueous solutions
Gholami, M., Shirzad‐Siboni, M., & Yang, J. (2016) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-015-0218-4 · Cited by 42
Evaluating efficiency of H2O2 on removal of organic matter from drinking water
Dargahi, A., Pirsaheb, M., Hazrati, S., Fazlzadeh, M., Khamutian, R., & Amirian, T. (2014) · Desalination and Water Treatment · doi:10.1080/19443994.2014.889608 · Cited by 40
Chen, S., Tang, S., Sun, Y., Wang, G., Chen, H., Yu, X., Su, Y., & Chen, G. (2018) · Materials · doi:10.3390/ma11081407 · Cited by 40
Adsorption of Acid Blue 161 (AB 161) Dye from Water by Multi-walled Carbon Nanotubes
Geyikçi, F. (2013) · Fullerenes Nanotubes and Carbon Nanostructures · doi:10.1080/1536383x.2011.643428 · Cited by 27
Álvarez-Torrellas, S., Ovejero, G., Lovera, R. A. G., Rodríguez, A., & García, J. (2016) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-016-1098-y · Cited by 19
Jafari, A. J., Kalantary, R. R., Babaei, A. A., Farsani, M. H., & Kakavandi, B. (2016) · Majallah-i dānishgāh-i ̒ulūm-i pizishkī-i Māzandarān/Journal of Mazandaran University of Medical Sciences · Cited by 6
Zulkepli, S. A., Abdullah, M. P., & Khalik, W. M. A. W. M. (2016) · Malaysian Journal of Analytical Science · doi:10.17576/mjas-2016-2002-06 · Cited by 5
Tesfamariam, Y. M., Macherey‐Meyer, S., Kuhr, K., Becker, I., Monsef, I., Jakob, T., Heidenreich, A., & Skoetz, N. (2018) · Cochrane Database of Systematic Reviews · doi:10.1002/14651858.cd013020 · Cited by 3
Cited by
Environmental impacts and remediation of dye-containing wastewater
Lin, J., Ye, W., Xie, M., Seo, D. H., Luo, J., Wan, Y., & Van der Bruggen, B. (2023) · Nature Reviews Earth & Environment · doi:10.1038/s43017-023-00489-8 · Cited by 900
Lan, D., Zhu, H., Zhang, J., Li, S., Chen, Q., Wang, C., Wu, T., & Xu, M. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.133464 · Cited by 390
A review on selective dye adsorption by different mechanisms
Shi, Y., Chang, Q., Zhang, T., Song, G., Sun, Y., & Ding, G. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108639 · Cited by 302
Metadata
- Authors
- Azari, A., Nabizadeh, R., Nasseri, S., Mahvi, A. H., & Mesdaghinia, A. R.
- Venue
- Chemosphere
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 250
- Pages
- 126238
- ISSN
- 0045-6535 (ISSN-L)
- OpenAlex
- W3007275138
- Cited by
- 294
- References
- 69
- FWCI
- 6.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.