The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Ethylenediamine-functionalized Zr-based MOF for efficient removal of heavy metal ions from water
Abstract
Ethylenediamine-functionalized Zr-based metal-organic framework (MOF, UiO-66-EDA) was prepared via Michael addition reaction to investigate its potential for adsorption of heavy metal ions from water. Specifically, the influence of agitation time, solution pH, the dosage of the adsorbent, initial metal ion concentration, temperature, and coexistence of other metal ions was investigated on the removal efficiency of UiO-66-EDA towards Pb(II), Cd(II), and Cu(II) metal ions. The pseudo-second-order kinetic model governed the adsorption of these ions onto the UiO-66-EDA. Langmuir isotherm model matched the experimental isotherm of adsorption with a maximum adsorption capacity of 243.90, 217.39, and 208.33 mg/g for Pb, Cd, and Cu ions, respectively. The adsorption of Pb, Cd, and Cu ions onto UiO-66-EDA was dependent on electron exchange, electron sharing, electrostatic and covalent interactions between the metal ions as well as the abundant functional groups on UiO-66-EDA surface. Thermodynamic parameters such as free energy changes (ΔG), standard enthalpy changes (ΔH), and standard entropy changes (ΔS) were calculated, which revealed spontaneous and endothermic nature of the adsorption process. The UiO-66-EDA was stable and recyclable during adsorption studies of Pb, Cd, and Cu ions, suggesting its potentiality as an adsorbent for heavy metals recovery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of heavy metals from industrial wastewaters: a review
Azimi, A., Azari, A., Rezakazemi, M., & Ansarpour, M. (2017) · ChemBioEng Reviews · doi:10.1002/cben.201600010 · Cited by 1,267
Self-citationRezakazemi, M., Ebadi Amooghin, A., Montazer-Rahmati, M. M., Ismail, A. F., & Matsuura, T. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.01.003 · Cited by 853
Self-citationCui, L., Wang, Y., Gao, L., Hu, L., Yan, L., Wei, Q., & Du, B. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.043 · Cited by 716
Badruddoza, A. Z. M., Shawon, Z. B. Z., Tay, W. J. D., Hidajat, K., & Uddin, M. S. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.08.030 · Cited by 636
Superior chemical stability of UiO-66 metal-organic frameworks (MOFs) for selective dye adsorption
Ahmadijokani, F., Mohammadkhani, R., Ahmadipouya, S., Shokrgozar, A., Rezakazemi, M., Molavi, H., Aminabhavi, T. M., & Arjmand, M. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125346 · Cited by 564
Self-citationAdsorption of copper(II) from aqueous solutions on activated carbon prepared from grape bagasse
Demiral, H., & Güngör, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.084 · Cited by 460
Younas, M., Rezakazemi, M., Daud, M., Wazir, M. B., Ahmad, S., Ullah, N., Inamuddin, & Ramakrishna, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100849 · Cited by 421
Self-citationSaleem, H., Rafique, U., & Davies, R. P. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.09.043 · Cited by 413
Molavi, H., Hakimian, A., Shojaei, A., & Raeiszadeh, M. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.03.189 · Cited by 337
Self-citationFang, Q.-R., Yuan, D.-Q., Sculley, J., Li, J.-R., Han, Z.-B., & Zhou, H.-C. (2010) · Inorganic Chemistry · doi:10.1021/ic101935f · Cited by 309
Jiao, C., Xiong, J., Tao, J., Xu, S., Zhang, D., Lin, H., & Chen, Y. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.11.061 · Cited by 276
Wang, Y., Ye, G., Chen, H., Hu, X., Niu, Z., & Ma, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03201f · Cited by 257
Shi, Z., Xu, C., Guan, H., Li, L., Fan, L., Wang, Y., Liu, L., Meng, Q., & Zhang, R. (2018) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2017.12.043 · Cited by 257
Wang, K., Gu, J., & Yin, N. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b04997 · Cited by 252
Enhancing CO2/N2 adsorption selectivity via post-synthetic modification of NH2-UiO-66(Zr)
Molavi, H., Eskandari, A., Shojaei, A., & Mousavi, S. A. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.08.043 · Cited by 242
Self-citationMejias Carpio, I. E., Mangadlao, J. D., Nguyen, H. N., Advincula, R. C., & Rodrigues, D. F. (2014) · Carbon · doi:10.1016/j.carbon.2014.05.032 · Cited by 240
Naeimi, S., & Faghihian, H. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.11.028 · Cited by 203
Zhang, X., Yan, L., Li, J., & Yu, H. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.12.028 · Cited by 192
Ke, F., Jiang, J., Li, Y., Liang, J., Wan, X., & Ko, S. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.03.303 · Cited by 180
Fang, Y. Z., Wen, J., Zeng, G., Jia, F., Zhang, S., Peng, Z., & Zhang, H. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.136 · Cited by 179
Mahmoud, M. E., Amira, M. F., Seleim, S. M., & Mohamed, A. K. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.120979 · Cited by 171
Ali, J., Wang, H., Ifthikar, J., Khan, A., Wang, T., Zhan, K., Shahzad, A., Chen, Z., & Chen, Z. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.09.080 · Cited by 163
Manirethan, V., Raval, K., Rajan, R., Thaira, H., & Balakrishnan, R. M. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.02.084 · Cited by 158
Xue, H., Chen, Q., Jiang, F., Yuan, D., Lv, G., Liang, L., Liu, L., & Hong, M. (2016) · Chemical Science · doi:10.1039/c6sc00972g · Cited by 155
Schiff base anchored on metal-organic framework for Co (II) removal from aqueous solution
Yuan, G., Tian, Y., Liu, J., Tu, H., Liao, J., Yang, J., Yang, Y., Wang, D., & Liu, N. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.06.024 · Cited by 152
Ghaedi, A. M., Panahimehr, M., Shirazi, A. R., Hosseini, S. J., Vafaei, A., & Baneshi, M. M. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.09.051 · Cited by 134
Rapid and tunable selective adsorption of dyes using thermally oxidized nanodiamond
Molavi, H., Shojaei, A., & Pourghaderi, A. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.03.088 · Cited by 119
Self-citationAboutorabi, L., Morsali, A., Tahmasebi, E., & Büyükgüngör, O. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.6b00522 · Cited by 118
Hur, J., Shin, J., Yoo, J., & Seo, Y. (2015) · The Scientific World JOURNAL · doi:10.1155/2015/836287 · Cited by 116
Liu, Q., Li, S., Yu, H., Zeng, F., Li, X., & Su, Z. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.11.074 · Cited by 99
Rouhani, F., & Morsali, A. (2018) · Chemistry - A European Journal · doi:10.1002/chem.201706016 · Cited by 94
Impact of scale, activation solvents, and aged conditions on gas adsorption properties of UiO-66
Ahmadijokani, F., Ahmadipouya, S., Molavi, H., Rezakazemi, M., Aminabhavi, T. M., & Arjmand, M. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.111155 · Cited by 89
Self-citationHuang, Z., Zhao, M., Wang, C., Wang, S., Dai, L., Zhang, L., & Xu, L. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123343 · Cited by 87
Solis, K. L., Kwon, Y.-H., Kim, M.-H., An, H., Jeon, C., & Hong, Y. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.124656 · Cited by 86
Hasankola, Z. S., Rahimi, R., Shayegan, H., Moradi, E., & Safarifard, V. (2019) · Inorganica Chimica Acta · doi:10.1016/j.ica.2019.119264 · Cited by 82
Molavi, H., Moghimi, H. R., & Taheri, R. A. (2020) · Applied Organometallic Chemistry · doi:10.1002/aoc.5549 · Cited by 79
Self-citationRahimi, E., & Mohaghegh, N. (2015) · Mine Water and the Environment · doi:10.1007/s10230-015-0327-7 · Cited by 74
Nyairo, W. N., Eker, Y. R., Kowenje, C. O., Akın, İ., Bingöl, H., Tor, A., & Ongeri, D. M. K. (2018) · Separation Science and Technology · doi:10.1080/01496395.2018.1424203 · Cited by 74
Shayegan, H., Ali, G. A. M., & Safarifard, V. (2020) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-020-01474-0 · Cited by 61
Yan, J., Lan, G., Qiu, H., Chen, C., Liu, Y., Du, G., & Zhang, J. (2018) · Separation Science and Technology · doi:10.1080/01496395.2018.1439064 · Cited by 57
Molavi, H., Ahmadijokani, F., & Shojaei, A. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00372 · Cited by 57
Self-citationRemoval of cadmium ions from aqueous solutions using TMU-16-NH 2 metal organic framework
Roushani, M., Saedi, Z., & Baghelani, Y. M. (2017) · Environmental Nanotechnology Monitoring & Management · doi:10.1016/j.enmm.2017.01.003 · Cited by 51
Afshariazar, F., Morsali, A., Wang, J., & Junk, . C. (2019) · Chemistry - A European Journal · doi:10.1002/chem.201904436 · Cited by 30
Cited by
UiO-66 metal–organic frameworks in water treatment: A critical review
Ahmadijokani, F., Molavi, H., Rezakazemi, M., Tajahmadi, S., Bahi, A., Ko, F., Aminabhavi, T. M., Li, J.-R., & Arjmand, M. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100904 · Cited by 559
Self-citationMo, Z., Tai, D., Zhang, H., & Shahab, A. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.136320 · Cited by 338
Methods to prepare biosorbents and magnetic sorbents for water treatment: a review
Osman, A. I., El-Monaem, E. M. A., Elgarahy, A. M., Aniagor, C. O., Hosny, M., Farghali, M., Rashad, E., Ejimofor, M. I., López-Maldonado, E. A., Ihara, I., et al. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01603-4 · Cited by 329
Kaur, H., Devi, N., Siwal, S. S., Alsanie, W. F., Thakur, M. K., & Thakur, V. K. (2023) · ACS Omega · doi:10.1021/acsomega.2c07719 · Cited by 273
Photocatalysis vs adsorption by metal oxide nanoparticles
Qumar, U., Hassan, J. Z., Bhatti, R. A., Raza, A., Nazir, G., Nabgan, W., & Ikram, M. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.05.020 · Cited by 262
Metadata
- Authors
- Ahmadijokani, F., Tajahmadi, S., Bahi, A., Molavi, H., Rezakazemi, M., Ko, F., Aminabhavi, T. M., & Arjmand, M.
- Venue
- Chemosphere
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 264
- Issue
- Pt 2
- Pages
- 128466
- ISSN
- 0045-6535 (ISSN-L)
- OpenAlex
- W3089678414
- Cited by
- 306
- References
- 43
- FWCI
- 12.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.