2D Ti3C2Tz MXene Synthesized by Water-free Etching of Ti3AlC2 in Polar Organic Solvents
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
Summary The first MXene discovered, Ti3C2Tz, was synthesized by etching of the parent MAX phase, Ti3AlC2, in a solution of concentrated hydrofluoric acid. Since then, several other ways of synthesizing MXenes have been reported, such as electrochemical etching in various electrolytes, high-temperature alkali treatment, molten salt synthesis, etc. The majority of these etching methods, however, use water as their main solvent, limiting direct use of MXenes in water-sensitive applications. In this work, we show that it is possible to etch, and delaminate, MXenes in the absence of water, by using organic polar solvents in the presence of ammonium dihydrogen fluoride. We further show that by using this etching method, it is possible to obtain Ti3C2Tz flakes rich in fluorine terminations. We also demonstrate that electrodes made from Ti3C2Tz etched in propylene carbonate resulted in Na-ion battery anodes with double the capacity to those etched in water.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Self-citationConductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Self-citationElectrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566 · cited 1×
“Most importantly, it is well established that even trace amounts of water in Li or Na ion batteriesusingorganicelectrolytescannegatively impact theirperformance,makingvacuum annealing of MXene anodes mandatory before cell assembly.(20)”
BackgroundElectromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Ullmann's Encyclopedia of Industrial Chemistry
(2000) · Wiley eBooks · doi:10.1002/14356007 · Cited by 3,543
X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)
Halim, J., Cook, K. M., Naguib, M., Eklund, P., Gogotsi, Y., Rosen, J., & Barsoum, M. W. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.089 · Cited by 2,047
Self-citationMetallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Transparent Conductive Two-Dimensional Titanium Carbide Epitaxial Thin Films
Halim, J., Lukatskaya, M. R., Cook, K. M., Lu, J., Smith, C. R., Näslund, L.-Å., May, S. J., Hultman, L., Gogotsi, Y., Eklund, P., et al. (2014) · Chemistry of Materials · doi:10.1021/cm500641a · Cited by 1,698
Self-citationLi, M., Lu, J., Luo, K., Li, Y., Chang, K., Chen, K., Zhou, J., Rosen, J., Hultman, L., Eklund, P., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00574 · Cited by 1,530
Fluorine‐Free Synthesis of High‐Purity Ti3C2Tx (T=OH, O) via Alkali Treatment
Li, T., Yao, L., Liu, Q., Gu, J., Luo, R., Li, J., Yan, X., Wang, W., Liu, P., Chen, B., et al. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800887 · Cited by 1,457
Cited by
The world of two-dimensional carbides and nitrides (MXenes)
VahidMohammadi, A., Rosen, J., & Gogotsi, Y. (2021) · Science · doi:10.1126/science.abf1581 · Cited by 3,191
Ten Years of Progress in the Synthesis and Development of MXenes
Naguib, M., Barsoum, M. W., & Gogotsi, Y. (2021) · Advanced Materials · doi:10.1002/adma.202103393 · Cited by 1,257
Self-citationFundamentals of MXene synthesis
Lim, K. R. G., Shekhirev, M., Wyatt, B. C., Anasori, B., Gogotsi, Y., & Seh, Z. W. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00104-6 · Cited by 1,236
Advances in the Synthesis of 2D MXenes
Wei, Y., Zhang, P., Soomro, R. A., Zhu, Q., & Xu, B. (2021) · Advanced Materials · doi:10.1002/adma.202103148 · Cited by 1,216
Gong, E., Ali, S., Hiragond, C. B., Kim, H. S., Powar, N. S., Kim, D., Kim, H., & In, S.-I. (2022) · Energy & Environmental Science · doi:10.1039/d1ee02714j · Cited by 805
Characterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
A critical analysis of the X-ray photoelectron spectra of Ti3C2Tz MXenes
Natu, V., Benchakar, M., Canaff, C., Habrioux, A., Célérier, S., & Barsoum, M. W. (2021) · Matter · doi:10.1016/j.matt.2021.01.015 · Cited by 717
Self-citationA Review on MXene Synthesis, Stability, and Photocatalytic Applications
Murali, G., Reddy Modigunta, J. K., Park, Y. H., Lee, J.-H., Rawal, J., Lee, S.-Y., In, I., & Park, S.-J. (2022) · ACS Nano · doi:10.1021/acsnano.2c04750 · Cited by 668
2D MXenes: Tunable Mechanical and Tribological Properties
Wyatt, B. C., Rosenkranz, A., & Anasori, B. (2021) · Advanced Materials · doi:10.1002/adma.202007973 · Cited by 646
Shayesteh Zeraati, A., Mirkhani, S. A., Sun, P., Naguib, M., Braun, P. V., & Sundararaj, U. (2021) · Nanoscale · doi:10.1039/d0nr06671k · Cited by 605
Lim, K. R. G., Handoko, A. D., Nemani, S. K., Wyatt, B., Jiang, H.-Y., Tang, J., Anasori, B., & Seh, Z. W. (2020) · ACS Nano · doi:10.1021/acsnano.0c05482 · Cited by 585
Ti3C2Tx MXene-Based Flexible Piezoresistive Physical Sensors
Wang, Y., Yue, Y., Cheng, F., Cheng, Y., Ge, B., Liu, N., & Gao, Y. (2022) · ACS Nano · doi:10.1021/acsnano.1c09925 · Cited by 406
Surface functionalization of MXenes
Mozafari, M., & Soroush, M. (2021) · Materials Advances · doi:10.1039/d1ma00625h · Cited by 395
Recent Progress in MXene‐Based Materials: Potential High‐Performance Electrocatalysts
Liu, A., Liang, X., Ren, X., Guan, W., Gao, M., Yang, Y., Yang, Q., Gao, L., Li, Y., & Ma, T. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003437 · Cited by 386
MXene as emerging nanofillers for high-performance polymer composites: A review
Gong, K., Zhou, K., Qian, X., Shi, C., & Yu, B. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108867 · Cited by 362
Ti3C2Tx MXene for electrode materials of supercapacitors
Ma, R., Chen, Z., Zhao, D., Zhang, X., Zhuo, J., Yin, Y., Wang, X., Yang, G., & Yi, F. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00681a · Cited by 347
A review of etching methods of MXene and applications of MXene conductive hydrogels
Zhou, C., Zhao, X., Xiong, Y., Tang, Y., Ma, X., Tao, Q., Sun, C., & Xu, W. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111063 · Cited by 287
Hetero‐MXenes: Theory, Synthesis, and Emerging Applications
Gao, L., Bao, W., Kuklin, A. V., Mei, S., Zhang, H., & Ågren, H. (2021) · Advanced Materials · doi:10.1002/adma.202004129 · Cited by 278
Zhou, A., Liu, Y., Li, S., Wang, X., Ying, G., Xia, Q., & Zhang, P. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0535-5 · Cited by 275
MXene as emerging material for photocatalytic degradation of environmental pollutants
Solangi, N. H., Karri, R. R., Mazari, S. A., Mubarak, N. M., Jatoi, A. S., Malafaia, G., & Azad, A. K. (2023) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214965 · Cited by 274
2D metal carbides and nitrides (MXenes) for sensors and biosensors
Alwarappan, S., Nesakumar, N., Sun, D., Hu, T. Y., & Li, C.-Z. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2021.113943 · Cited by 262
Metadata
- Authors
- Natu, V., Pai, R., Sokol, M., Carey, M., Kalra, V., & Barsoum, M. W.
- Venue
- Chem
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 6
- Issue
- 3
- Pages
- 616-630
- ISSN
- 2451-9294 (ISSN-L)
- OpenAlex
- W3008361808
- Cited by
- 551
- References
- 27
- FWCI
- 27.22
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.