The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
The Operator 4.0: Towards socially sustainable factories of the future
Open accessAbstract
Humans are all makers of a sort. The tools we operate constantly leverage our human capabilities and evolve over history to take advantage of any innovation or a new source of power that emerges. Human-Technology Symbiosis has always been the basis for leaps in human prosperity. As we are presently in the Fourth Industrial Revolution, or Industry 4.0, it is important to focus on challenges and opportunities of contemporary work-life. Here we find the worker, the operator, benefitting from cyber-physical systems technology, connectivity, and global information networks while retaining human strengths and weaknesses. This special issue will describe the implications of a new breed of the manufacturing worker, “The Operator 4.0”. The 13 contributions in this special issue will take us from the early anthropocentric organisational models to the emerging connected and cyber-physically enhanced “Operator 4.0” in highly dynamic work environments. Methods and tools for development and analysis of complex work will support the scholar or practitioner that would like to dig deeper into the future of the potential work-life of the Operator 4.0.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bainbridge, L. (1983) · Automatica · doi:10.1016/0005-1098(83)90046-8 · Cited by 2,205
David, R., Stahre, J., Wuest, T., Noran, O. S., Bernus, P., Berglund, Å. F., & Gorecky, D. (2016) · Chalmers Publication Library (Chalmers University of Technology) · Cited by 362
Self-citationEmpowering and engaging industrial workers with Operator 4.0 solutions
Kaasinen, E., Schmalfuß, F., Özturk, C., Aromaa, S., Boubekeur, M., Heilala, J., Heikkilä, P., Kuula, T., Liinasuo, M., Mach, S., et al. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.01.052 · Cited by 356
Fantini, P., Pinzone, M., & Taisch, M. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.01.025 · Cited by 298
Self-citationAnthropocentric perspective of production before and within Industry 4.0
Rauch, E., Linder, C., & Dallasega, P. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.01.018 · Cited by 284
Exploring the potential of Operator 4.0 interface and monitoring
Peruzzini, M., Grandi, F., & Pellicciari, M. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.12.047 · Cited by 232
Assembly systems in Industry 4.0 era: a road map to understand Assembly 4.0
Cohen, Y., Naseraldin, H., Chaudhuri, A., & Pilati, F. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04203-1 · Cited by 198
Motion Analysis System (MAS) for production and ergonomics assessment in the manufacturing processes
Bortolini, M., Faccio, M., Gamberi, M., & Pilati, F. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.10.046 · Cited by 169
Pinzone, M., Albè, F., Orlandelli, D., Barletta, I., Berlin, C., Johansson, B., & Taisch, M. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.03.028 · Cited by 168
Self-citationSmart and cognitive solutions for Operator 4.0: Laboratory H-CPPS case studies
Zolotová, I., Papcun, P., Kajáti, E., Miškuf, M., & Mocnej, J. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.10.032 · Cited by 162
Cited by
Industry 5.0: Prospect and retrospect
Leng, J., Sha, W., Wang, B., Zheng, P., Zhuang, C., Liu, Q., Wuest, T., Mourtzis, D., & Wang, L. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.09.017 · Cited by 1,300
Dantas, T. E. T., de-Souza, E. D., Destro, I. R., Hammes, G., Rodriguez, C. M. T., & Soares, S. R. (2021) · Sustainable Production and Consumption · doi:10.1016/j.spc.2020.10.005 · Cited by 685
Sony, M., & Naik, S. (2020) · Technology in Society · doi:10.1016/j.techsoc.2020.101248 · Cited by 651
Human Digital Twin in the context of Industry 5.0
Wang, B., Zhou, H., Li, X., Yang, G., Zheng, P., Song, C., Yuan, Y., Wuest, T., Yang, H., & Wang, L. (2024) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2023.102626 · Cited by 424
The four smarts of Industry 4.0: Evolution of ten years of research and future perspectives
Meindl, B., Ayala, N. F., Mendonça, J., & Frank, A. G. (2021) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2021.120784 · Cited by 368
Metadata
- Authors
- Romero, D., Stahre, J., & Taisch, M.
- Venue
- Computers & Industrial Engineering
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 139
- Pages
- 106128
- ISSN
- 0360-8352 (ISSN-L)
- OpenAlex
- W2983132501
- Cited by
- 285
- References
- 20
- FWCI
- 21.56
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Operator 4.0: Towards socially sustainable factories of the future. https://app.cochat.ai/papers/10.1016/j.cie.2019.106128
- The paper
- Romero, D., Stahre, J., & Taisch, M. (2020). The Operator 4.0: Towards socially sustainable factories of the future. Computers & Industrial Engineering. https://doi.org/10.1016/j.cie.2019.106128
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.