Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 823

The DOI matches its Crossref record.

Manufacturing and measurement of freeform optics

Fang, F.Z., Zhang, X.D., Weckenmann, A., Zhang, G.X., Evans, C.·2013·CIRP Annals
DOI 10.1016/j.cirp.2013.05.003
Open this paper in CoChat — free account

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cirp.2013.05.003

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 216

  1. Álvarez, 2001, TIR-R Concentrator: A New Compact High-gain SMS Design, Proceedings of the SPIE, 4446, 32, 10.1117/12.448828 · doi:10.1117/12.448828
  2. Atad-Ettedgui, 2006, Opto-mechanical Design of SCUBA-2, Proceedings of the SPIE, 6273, 62732H, 10.1117/12.669231 · doi:10.1117/12.669231
  3. Balzer, 2011, Tactile 3D Microprobe System with Exchangeable Styli, MST 22 id 094018
  4. Belousov, 2008, A Gradient Method of Designing Optical Elements for Forming a Specified Irradiance on a Curved Surface, Journal of Optical Technology, 75, 161, 10.1364/JOT.75.000161 · doi:10.1364/jot.75.000161
  5. Benítez, 2007, The Future of Illumination Design, Optics and Photonics News, 18, 20, 10.1364/OPN.18.5.000020 · doi:10.1364/opn.18.5.000020
  6. Benítez, 2004, Simultaneous Multiple Surface Optical Design Method in Three Dimensions, Optical Engineering, 43, 1489, 10.1117/1.1752918 · doi:10.1117/1.1752918
  7. Benitez, 2004, SMS Design Method in 3D Geometry: Examples and Applications, Proceedings of the SPIE, 5185, 10.1117/12.506857 · doi:10.1117/12.506857
  8. Besl, 1992, A Method for Registration of 3-D Shapes, IEEE Transactions on Pattern Analysis and Machine Interlligence, 14, 239, 10.1109/34.121791 · DOI · Paper page
  9. Binnig, 1982, Surface Studies by Scanning Tunneling Microscopy, Physical Review Letters, 49, 57, 10.1103/PhysRevLett.49.57 · DOI · Paper page
  10. Blateyron, 2006, New 3D Parameters and Filtration Techniques for Surface Metrology, Technology Report of Digital Surf
  11. Bothe, 2004, High-resolution 3D Shape Measurement on Specular Surfaces by Fringe Reflection, Proceedings of the SPIE, 5457, 411, 10.1117/12.545987 · doi:10.1117/12.545987
  12. Bradby, 2003, In situ Electrical Characterization of Phase Transformations in Si During Indentation, Physical Review B, 67, 085205, 10.1103/PhysRevB.67.085205 · doi:10.1103/physrevb.67.085205
  13. Brecher, 2006, NURBS Based Ultra-precision Free-form Machining, CIRP Annals – Manufacturing Technology, 55, 547, 10.1016/S0007-8506(07)60479-X · DOI
  14. Brinksmeier, 2008, Manufacturing of Molds for Replication of Micro Cube Corner Retroreflectors, Production Engineering, 2, 33, 10.1007/s11740-008-0082-8 · doi:10.1007/s11740-008-0082-8
  15. Brinksmeier, 2010, Ultra-precision Grinding, CIRP Annals – Manufacturing Technology, 59, 652, 10.1016/j.cirp.2010.05.001 · DOI · Paper page
  16. Brinksmeier, 2010, Submicron Functional Surfaces Generated by Diamond Machining, CIRP Annals – Manufacturing Technology, 59, 535, 10.1016/j.cirp.2010.03.037 · doi:10.1016/j.cirp.2010.03.037
  17. Brinksmeier, 2004, Polishing of Structured Molds, CIRP Annals – Manufacturing Technology, 53, 247, 10.1016/S0007-8506(07)60690-8 · doi:10.1016/s0007-8506(07)60690-8
  18. Brinksmeier, 2008, Tool Path Generation for Ultra-precision Machining of Free-form Surface, Production Engineering, 2, 241, 10.1007/s11740-008-0086-4 · doi:10.1007/s11740-008-0086-4
  19. Brückner, 2010, Thin Wafer-level Camera Lenses Inspired by Insect Compound Eyes, Optics Express, 18, 24379, 10.1364/OE.18.024379 · doi:10.1364/oe.18.024379
  20. Burge, 2004, Use of Computer Generated Holograms for Testing Aspheric Optics, Proceedings of the SPIE, 5494, 45
  21. Cakmakci, 2008, Optimal Local Shape Description for Rotationally Non-symmetric Optical Surface Design and Analysis, Optics Express, 16, 1583, 10.1364/OE.16.001583 · doi:10.1364/oe.16.001583
  22. Cakmakci, 2008, Application of Radial Basis Functions to Shape Description in a Dual-element Off-axis Eyewear Display: Field-of-view Limit, Journal of the Society for Information Display, 16, 1089, 10.1889/JSID16.11.1089 · doi:10.1889/jsid16.11.1089
  23. Chapman, 2004, Ultra-precision machining systems; an enabling technology for perfect surfaces, Moore Nanotechnology Systems
  24. Chen, 2005, Machining of Micro Aspherical Mould Inserts, Precision Engineering, 29, 315, 10.1016/j.precisioneng.2004.11.002 · doi:10.1016/j.precisioneng.2004.11.002
  25. Cheng, 2009, Dedsign of an Optical See-through Head-mounted Display with a Low f-number and Large Field of View Using a Freeform Prism, Applied Optics, 48, 2655, 10.1364/AO.48.002655 · DOI · Paper page
  26. Cheng, 2010, Design and Fabrication of Free-form Shaped Lens for Laser Leveler Instrument, OSA Technical Digest (CD), FThX2
  27. Cheung, 2010, Measurement and Characterization of Ultra-precision Freeform Surfaces Using an Intrinsic Surface Feature-based Method, Measurement Science and Technology, 21, 115109, 10.1088/0957-0233/21/11/115109 · doi:10.1088/0957-0233/21/11/115109
  28. Clayor, 2004, An Overview of Freeform Optics Production, Proceedings of the SPIE, 5494
  29. Clayor, 2004, An Overview of Freeform Optics Production, Proceedings of the SPIE, 5494
  30. Dai, 2010, Tool Decentration Effect in Slow Tool Servo Diamond Turning Off-axis Conic Aspheric Surface, Proceedings of the SPIE, 7655, 10.1117/12.867694 · doi:10.1117/12.867694
  31. Dannberg, 2000, Polymer UV-moulding for Micro-optical Systems and O/E-integration Micromachine Technology for Micro-optics, Proceedings SPIE, 4179, 137, 10.1117/12.395684 · doi:10.1117/12.395684
  32. Danzebrink, 2006, Advances in Scanning Force Microscopy for Dimensional Metrology, CIRP Annals – Manufacturing Technology, 55, 841, 10.1016/j.cirp.2006.10.010 · doi:10.1016/j.cirp.2006.10.010
  33. Davis, 2009, Comparison of Freeform Manufacturing Techniques in the Production of Monolithic Lens Arrays, Proceedings of the SPIE, 7426, 742605, 10.1117/12.824451 · doi:10.1117/12.824451
  34. Davis, 2010, A Comparison of Linear Z-axis and Rotational B-axis Freeform Diamond Turning in International Optical Design Conference and Optical Fabrication and Testing, OSA Technical Digest (CD), OTuD1
  35. De Chiffre, 2003, Surfaces in Precision Engineering, Microengineering and Nanotechnology, CIRP Annals – Manufacturing Technology, 52, 561, 10.1016/S0007-8506(07)60204-2 · doi:10.1016/s0007-8506(07)60204-2
  36. Ding, 2008, Freeform LED Lens for Uniform Illumination, Optics Express, 16, 12958, 10.1364/OE.16.012958 · doi:10.1364/oe.16.012958
  37. Dörband, 2001, Interferometric Testing of Optical Surfaces at its Current Limit, Optik, 112, 392, 10.1078/0030-4026-00081 · doi:10.1078/0030-4026-00081
  38. Dowski, 1995, Extended Depth of Field Through Wave-front Coding, Applied Optics, 34, 1859, 10.1364/AO.34.001859 · DOI · Paper page
  39. Dumas, 2004, Flexible Polishing and Metrology Solutions for Free-form Optics, Proceedings of the SPIE, 5494, 39
  40. Duparré, 2006, Micro-optical Artificial Compound Eyes, Bioinspiration & Biomimetics, 1, R1, 10.1088/1748-3182/1/1/R01 · doi:10.1088/1748-3182/1/1/r01
  41. Elfizy, 2005, Design and Control of a Dual-stage Feed Drive, International Journal of Machine Tools & Manufacture, 45, 153, 10.1016/j.ijmachtools.2004.07.008 · doi:10.1016/j.ijmachtools.2004.07.008
  42. Evans, 2008, Uncertainty Evaluation for Measurements of Peak-to-valley Surface form Errors, CIRP Annals – Manufacturing Technology, 57, 509, 10.1016/j.cirp.2008.03.084 · doi:10.1016/j.cirp.2008.03.084
  43. Evans, 2010, Certification, Self-calibration, and Uncertainty in Testing Optical Flats, Proceedings of the SPIE, 7656, 76560S, 10.1117/12.865762 · doi:10.1117/12.865762
  44. Evans, 1999, Structured, Textured or Engineered Surfaces, CIRP Annals – Manufacturing Technology, 48, 541, 10.1016/S0007-8506(07)63233-8 · doi:10.1016/s0007-8506(07)63233-8
  45. Evans, 1996, Self-calibration: Reversal, Redundancy, Error Separation and Absolute Testing, CIRP Annals – Manufacturing Technology, 45, 617, 10.1016/S0007-8506(07)60515-0 · doi:10.1016/s0007-8506(07)60515-0
  46. Fan, 2006, Development of a Low-cost micro-CMM for 3D Micro/nano Measurements, Measurement Science and Technology, 17, 524, 10.1088/0957-0233/17/3/S12 · doi:10.1088/0957-0233/17/3/s12
  47. Fang, 2011, Nanometric Cutting of Single Crystal Silicon Surfaces Modified by Ion Implantation, CIRP Annals – Manufacturing Technology, 60, 527, 10.1016/j.cirp.2011.03.057 · doi:10.1016/j.cirp.2011.03.057
  48. Fang, 2004, On Minimum Exit-burr in Micro Cutting, Journal of Micromechanics and Microengineering, 14, 984, 10.1088/0960-1317/14/7/020 · doi:10.1088/0960-1317/14/7/020
  49. Fang, 2005, Modeling and Investigation on Machining Mechanism of Nano-cutting Monocrystalline Silicon, International Journal of Machine Tools and Manufacture, 45, 1681, 10.1016/j.ijmachtools.2005.03.010 · DOI
  50. Fang, 2007, A Study on Mechanism of Nano-cutting Single Crystal Silicon, Journal of Materials Processing Technology, 184, 210
  51. Fang, 2006, An Experimental Study of Micromachining Step-mirror for Laser Diode Beam Shaping, Journal of Micromechanics and Microengineering, 16, 214, 10.1088/0960-1317/16/2/004 · doi:10.1088/0960-1317/16/2/004
  52. Fang, 2008, Cylindrical Coordinate Machining of Optical Freeform Surface, Optics Express, 16, 7323, 10.1364/OE.16.007323 · doi:10.1364/oe.16.007323
  53. Fang, 1998, Diamond Cutting of Silicon with Nanometric Finish, CIRP Annals – Manufacturing Technology, 47, 45, 10.1016/S0007-8506(07)62782-6 · DOI
  54. Feng, 2010, Design of LED Freeform Optical System for Road Lighting with High Luminance/Illuminance Ratio, Optics Express, 18, 22020, 10.1364/OE.18.022020 · doi:10.1364/oe.18.022020
  55. Forbes, 2007, Shape Specification for Axially Symmetric Optical Surfaces, Optics Express, 15, 5218, 10.1364/OE.15.005218 · doi:10.1364/oe.15.005218
  56. Forbes, 2012, Characterizing the Shape of Freeform Optics, Optics Express, 20, 2483, 10.1364/OE.20.002483 · DOI · Paper page
  57. Fournier, 2008, Design Methodology for High Brightness Projectors, Journal of Display Technology, 4, 86, 10.1109/JDT.2007.907110 · doi:10.1109/jdt.2007.907110
  58. Fournier, 2008, Optimization of Freeform Lightpipes for Light-emitting-diode Projectors, Applied Optics, 47, 957, 10.1364/AO.47.000957 · doi:10.1364/ao.47.000957
  59. Gao, 2008, Surface Measurement Errors Using Commercial Scanning White Light Interferometers, MST 19, Id015303
  60. Gao, 2008, Fabrication of Large-area Micro-lens Arrays with Fast Tool Control, International Journal of Precision Engineering and Manufacturing, 9, 32
  61. Gao, 2007, Surface Profile Measurement of a Sinusoidal Grid Using an Atomic Force MICROScope on a Diamond Turning Machine, Precision Engineering, 31, 304, 10.1016/j.precisioneng.2007.01.003 · doi:10.1016/j.precisioneng.2007.01.003
  62. Gao, 2003, Precision Nano-fabrication and Evaluation of a Large Area Sinusoidal Grid Surface for a Surface Encoder, Precision Engineering, 27, 289, 10.1016/S0141-6359(03)00028-X · DOI
  63. Garcia-Botella, 2006, Elliptical Concentrators, Applied Optics, 45, 7622, 10.1364/AO.45.007622 · doi:10.1364/ao.45.007622
  64. Garrard, 2005, Design Tools for Freeform Optics, Proceedings of the SPIE, 5874, 95
  65. Geckeler, 2007, Optimized Use and Calibration of Autocollimators in Deflectometry, Proceedings of the SPIE, 6704, 670407.1
  66. Gogotsi, 1999, Raman Microspectroscopy Study of Processing-induced Phase Transformations and Residual Stress, Semiconductor Science and Technology, 14, 936, 10.1088/0268-1242/14/10/310 · DOI
  67. Gutierrez, 2005, Magnetic Servo Levitation by Sliding-mode Control of Nonaffine Systems with Algebraic Input Invertibility, IEEE Transactions on Industrial Electronics, 52, 1449, 10.1109/TIE.2005.855651 · doi:10.1109/tie.2005.855651
  68. Haitjema, 2001, Development of a Silicon-based Nanoprobe System for 3-d Measurements, CIRP Annals – Manufacturing Technology, 50, 365, 10.1016/S0007-8506(07)62141-6 · doi:10.1016/s0007-8506(07)62141-6
  69. Hao, 2008, Freeform Surface Lens Design for Uniform Illumination, Journal of Optics A: Pure and Applied Optics, 10, 075005, 10.1088/1464-4258/10/7/075005 · doi:10.1088/1464-4258/10/7/075005
  70. Henselmans, 2011, The NANOMEFOS Non-contact Measurement Machine for Freeform Optics, Precision Engineering, 35, 607, 10.1016/j.precisioneng.2011.04.004 · doi:10.1016/j.precisioneng.2011.04.004
  71. Hicks, 2007, Direct Methods for Freeform Surface Design, Proceedings of the SPIE, 6668, 666802, 10.1117/12.731453 · doi:10.1117/12.731453
  72. Hicks, 2008, Controlling a Ray Bundle With a Free-form Reflector, Optics Letters, 33, 1672, 10.1364/OL.33.001672 · doi:10.1364/ol.33.001672
  73. Hidaka, 2006, Study of a Small-sized Ultrasonic Probe, CIRP Annals – Manufacturing Technology, 55, 567, 10.1016/S0007-8506(07)60484-3 · doi:10.1016/s0007-8506(07)60484-3
  74. Horisaki, 2007, Three-dimensional Information Acquisition Using a Compound Imaging System, Optical Review, 14, 347, 10.1007/s10043-007-0347-z · doi:10.1007/s10043-007-0347-z
  75. Hoshi, 1996, vol. 3653, 234
  76. Huang, 2009, Design and Fabrication of a Micro Alvarez Lens Array with a Variable Focal Length, Microsystem Technologies, 15, 559, 10.1007/s00542-008-0706-0 · doi:10.1007/s00542-008-0706-0
  77. Jenkins, 1996, Tailored Reflectors for Illumination, Applied Optics, 35, 1669, 10.1364/AO.35.001669 · doi:10.1364/ao.35.001669
  78. Jiang, 2010, Freeform Surface Filtering Using the Diffusion Equation, Proceedings of the Royal Society A, 467, 841, 10.1098/rspa.2010.0307 · doi:10.1098/rspa.2010.0307
  79. Jiang, 2007, Freeform Surface Characterisation – A Fresh Strategy, CIRP Annals – Manufacturing Technology, 56, 553, 10.1016/j.cirp.2007.05.132 · doi:10.1016/j.cirp.2007.05.132
  80. Jiang, 2007, Paradigm Shifts in Surface Metrology. Part II. The Current Shift, Proceedings of the Royal Society A, 463, 2071, 10.1098/rspa.2007.1873 · DOI
  81. Jiang, 2007, Paradigm Shifts in Surface Metrology. Part I. Historical Philosophy, Proceedings of the Royal Society A, 463, 2049, 10.1098/rspa.2007.1874 · doi:10.1098/rspa.2007.1874
  82. Jiang, 2012, Technological Shifts in Surface Metrology, CIRP Annals – Manufacturing Technology, 61, 815, 10.1016/j.cirp.2012.05.009 · doi:10.1016/j.cirp.2012.05.009
  83. Kanolt, C.W., 1959, Multifocal opthalmic lenses, United States Patent, 2 (878):721.
  84. Kase, 1999, Shape Error Evaluation Method of Free-form Surfaces, Computer-Aided Design, 31, 495, 10.1016/S0010-4485(99)00046-9 · DOI
  85. Kaya, 2011, Edge Clustered Fitting Grids for (-Polynomial Characterization of Freeform Optical Surfaces, Optics Express, 19, 26962, 10.1364/OE.19.026962 · doi:10.1364/oe.19.026962
  86. Kim, 2003, Replication Qualities and Optical Properties of UV-moulded Microlens Arrays, Jounral of Physics D: Applied Physics, 36, 2451, 10.1088/0022-3727/36/20/005 · doi:10.1088/0022-3727/36/20/005
  87. Ko, 2003, An Algorithm for Optimal Free-form Object Matching, Computer-Aided Design, 25, 913, 10.1016/S0010-4485(02)00205-1 · DOI
  88. Ko, 2003, Shape Intrinsic Properties for Free-form Object Matching, Journal of Computing and Information Science in Engineering, 3, 325, 10.1115/1.1633277 · doi:10.1115/1.1633277
  89. Kochengin, 1998, On the Design of Reflectors with Prespecified Distribution of Virtual Sources and Intensities, Inverse Problesms, 14, 661, 10.1088/0266-5611/14/3/016 · doi:10.1088/0266-5611/14/3/016
  90. Komanduri, 2001, Molecular Dynamics Simulation of the Nanometric Cutting of Silicon, Philosophical Magazine B, 81, 1989, 10.1080/13642810108208555 · doi:10.1080/13642810108208555
  91. Kong, 2009, An Investigation into Surface Generation in Ultra-precision Raster Milling, Journal of Materials Processing Technology, 209, 4178, 10.1016/j.jmatprotec.2008.11.002 · doi:10.1016/j.jmatprotec.2008.11.002
  92. Kong, 2007, Measuring Optical Freeform Surfaces Using a Coupled Reference Data Method, Measurement Science and Technology, 18, 2252, 10.1088/0957-0233/18/7/060 · doi:10.1088/0957-0233/18/7/060
  93. Kubala, 2003, Reducing Complexity in Computational Imaging Systems, Optics Express, 11, 2102, 10.1364/OE.11.002102 · doi:10.1364/oe.11.002102
  94. Kunnavakkam, 2003, Low-cost, Low-loss Microlens Arrays Fabricated by Soft-lithography Replication Process, Applied Physics Letters, 82, 1152, 10.1063/1.1555694 · doi:10.1063/1.1555694
  95. Lai, 2009, Experimental Result and Simulation Analysis for the Use of Pixelated Illumination from Source Mask Optimization for 22nm Logic Lithography Process, Proceedings of the SPIE, 7274, 72740A, 10.1117/12.814680 · doi:10.1117/12.814680
  96. Lee, 2001, Characterization of Lenslet Arrays for Astronomical Spectroscopy, Paublication of the Astronomical Society of the Pacific, 113, 1406, 10.1086/323908 · doi:10.1086/323908
  97. Lee, 2011, Precision mEasurement of Micro-lens Profile by Using a Force-controlled Diamond Cutting Tool on an Ultra-precision Lathe, International Journal of Precision Technology, 2, 211, 10.1504/IJPTECH.2011.039460 · doi:10.1504/ijptech.2011.039460
  98. Li, 2009, Design and Control of Dual-stage Feed Drive System in Ultra-precision Machine Tools, Optics and Precision Engineering, 17, 1426
  99. Li, 2006, A Novel Robust Gaussian Filtering Method for the Characterization of Surface Generation in Ultra-precision Machining, Precision Engineering, 30, 421, 10.1016/j.precisioneng.2006.01.005 · doi:10.1016/j.precisioneng.2006.01.005
  100. Li, 2010, Design and Fabrication of a Freeform Prism Array for 3D Microscopy, Journal of the Optical Society of America A, 27, 2613, 10.1364/JOSAA.27.002613 · doi:10.1364/josaa.27.002613
  101. Li, 2012, Design and Fabrication of a Freeform Microlens Array for a Compact Large-field-of-view Compound-eye Camera, Applied Optics, 51, 1843, 10.1364/AO.51.001843 · doi:10.1364/ao.51.001843
  102. Li, 2011, Design and Fabrication of a Freeform Microlens Array for Uniform Beam Shaping, Microsystem Technologies, 17, 1713, 10.1007/s00542-011-1359-y · doi:10.1007/s00542-011-1359-y
  103. Liebrich, 2012, Improvements and Experimental Validation of a 3D-probing System for Micro-components, CIRP Annals – Manufacturing Technology, 61, 475, 10.1016/j.cirp.2012.03.107 · doi:10.1016/j.cirp.2012.03.107
  104. Liu, 2010, Precision Positioning Device Using the Combined Piezo-VCM Actuator with Frictional Constraint, Precision Engineering, 34, 534, 10.1016/j.precisioneng.2010.02.006 · doi:10.1016/j.precisioneng.2010.02.006
  105. Liu, 2000, Development of Huston's Method on Multi-body Dynamics, China Mechanichal Engineering, 11, 601
  106. Lu, 2005, Ultrafast Tool Servos for Diamond Yurning, CIRP Annals – Manufacturing Technology, 54, 383, 10.1016/S0007-8506(07)60128-0 · doi:10.1016/s0007-8506(07)60128-0
  107. Luo, 2010, Design of Compact and Smooth Free-form Optical System with Uniform Illuminance for LED Source, Optics Express, 18, 9055, 10.1364/OE.18.009055 · doi:10.1364/oe.18.009055
  108. Ma, 2012, Design of a Freeform Varifocal Panoramic Optical System with Specified Annular Center of Field of View, Optics Express, 19, 3843, 10.1364/OE.19.003843 · doi:10.1364/oe.19.003843
  109. Mallock, 1881, The Action of Cutting Tools, Proceedings of the Royal Society of London, 33, 127, 10.1098/rspl.1881.0079 · doi:10.1098/rspl.1881.0079
  110. Manske, 2007, New Applications of the Nanopositioning and Nanomeasuring Machine by Using Advanced Tactile and Non-tactile Probes, MST, 18, 520
  111. Marinello, 2007, Fast Technique for AFM Vertical Drift Compensation, Measurement Science & Technology, 18, 689, 10.1088/0957-0233/18/3/019 · doi:10.1088/0957-0233/18/3/019
  112. Marinello, 2007, Increase of Maximum Detectable Slope with Optical Profilers, Through Controlled Tilting and Image Processing, Measurement Science & Technology, 18, 384, 10.1088/0957-0233/18/2/S09 · doi:10.1088/0957-0233/18/2/s09
  113. Marinello, 2007, Increase of Maximum Detectable Slope with Optical Profilers, Through Controlled Tilting and Image Processing, Measurement Science & Technology, 18, 384, 10.1088/0957-0233/18/2/S09 · doi:10.1088/0957-0233/18/2/s09
  114. Marks, 1999, Three-dimensional Tomography Using a Cubic-phase Plate Extended Depth-of-field System, Optics Letters, 24, 253, 10.1364/OL.24.000253 · DOI
  115. Memorandum to US Industrial Metrologists. (2007) Three Flat Method for Calibration of Optical Flats and ISO 17025. NIST press.
  116. Merchant, 1944, Basic Mechanics of the Metal Cutting Process, Journal of Applied Mechanics Review, A11, 168, 10.1115/1.4009380 · doi:10.1115/1.4009380
  117. Miano, 1995, RX, a Nonimaging Concentrator, Applied Optics, 34, 2226, 10.1364/AO.34.002226 · doi:10.1364/ao.34.002226
  118. Michaeli, 2007, Geometrical Accuracy and Optical Performance of Injection Moulded and Injection-compression Moulded Plastic Parts, CIRP Annals – Manufacturing Technology, 56, 545, 10.1016/j.cirp.2007.05.130 · doi:10.1016/j.cirp.2007.05.130
  119. Millerd, 2004, Pixelated Phase-mask Dynamic Interfero-meter, Proceedings of the SPIE, 5531, 304, 10.1117/12.560807 · doi:10.1117/12.560807
  120. Miñano, 2008, High-efficiency Free-form Condenser Overcoming Rotational Symmetry Limitations, Optics Express, 16, 20193, 10.1364/OE.16.020193 · doi:10.1364/oe.16.020193
  121. Miñano, 2009, Free-form Optics for Illumination, Optical Review, 16, 99, 10.1007/s10043-009-0017-4 · doi:10.1007/s10043-009-0017-4
  122. Miñano, 1992, New Method of Design of Nonimaging Concentrators, Applied Optics, 31, 3051, 10.1364/AO.31.003051 · doi:10.1364/ao.31.003051
  123. Miñano, 1995, A High-gain, Compact, Nonimaging Concentrator: RXI, Applied Optics, 34, 7850, 10.1364/AO.34.007850 · doi:10.1364/ao.34.007850
  124. Miyashita, 2007, Standardization for Microlenses and Microlens Arrays, Japanese Journal of Applied Physics, 46, 5391, 10.1143/JJAP.46.5391 · doi:10.1143/jjap.46.5391
  125. Mizutani, 1990, A Piezoelectric-drive Table and its Application to Micro-grinding of Ceramics Materials, Precision Engineering, 12, 219, 10.1016/0141-6359(90)90064-6 · doi:10.1016/0141-6359(90)90064-6
  126. Molly, 1987, Brittle Fracture Mechanisms in Single Point Glass Abrasion, Proceedings of the SPIE, 802, 81, 10.1117/12.967105 · doi:10.1117/12.967105
  127. Moreno, 2008, Modeling the Radiation Pattern of LEDs, Optics Express, 16, 1808, 10.1364/OE.16.001808 · DOI
  128. Morimoto, 2008, Development of Cutting Device with Enlargement Mechanism of Displacement – Application of Non-circular Cutting, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2, 474, 10.1299/jamdsm.2.474 · doi:10.1299/jamdsm.2.474
  129. Moriya, 2010, Creation of V-shaped Microgrooves with Flat-ends by 6-axis Control Ultraprecision Machining, CIRP Annals – Manufacturing Technology, 59, 61, 10.1016/j.cirp.2010.03.054 · doi:10.1016/j.cirp.2010.03.054
  130. Muñoz, 2008, High-order Aspherics: The SMS Nonimaging Design Method Applied to Imaging Optics, Proceedings of the SPIE 7061, 70610G
  131. Noh, 2009, Improvement of a Fast Tool Control Unit for Cutting Force Measurement in Diamond Turning of Micro-lens Array, International Journal of Surface Science and Engineering, 3, 227, 10.1504/IJSURFSE.2009.026611 · doi:10.1504/ijsurfse.2009.026611
  132. Nussbaum, 1997, Design, Fabrication and Testing of Microlens Arrays for Sensors and Microsystems, Pure and Applied Optics, 6, 617, 10.1088/0963-9659/6/6/004 · doi:10.1088/0963-9659/6/6/004
  133. Ohl, 2004, Highlights of the ASPE 2004 Winter Topical Meeting on Free-form Optics: Design, Fabrication, Metrology, Assembly, Proceedings of the SPIE, 5494, 49, 10.1117/12.551469 · doi:10.1117/12.551469
  134. Ohmori, 2005, An Ultraprecision On-machine Measurement System, Key Engineering Materials, 295/296, 375, 10.4028/www.scientific.net/KEM.295-296.375 · doi:10.4028/www.scientific.net/kem.295-296.375
  135. Oliker, 2005, Geometric and Variational Methods in Optical Design of Reflecting Surfaces with Prescribed Irradiance Properties, Proceedings of the SPIE, 5924, 592407
  136. Oliker, 2006, Freeform Optical Systems with Prescribed Irradiance Properties in Near-Field, Proceedings of the SPIE, 6342, 10.1117/12.692268 · doi:10.1117/12.692268
  137. Oliker, 2007, Optical Design of Freeform Two-mirror Beam-shaping Systems, Journal of the Optical Society of America A, 24, 3741, 10.1364/JOSAA.24.003741 · doi:10.1364/josaa.24.003741
  138. Ong, 1996, Tailored Edge-ray Designs for Illumination with Tubular Source, Applied Optics, 35, 4321, 10.1364/AO.35.004361 · doi:10.1364/ao.35.004361
  139. Ottevaere, 2002, Two-dimensional Plastic Microlens Arrays by Deep Lithography with Protons: Fabrication and Characterization, Journal of Optics A: Pure and Applied Optics, 4
  140. Owari, 2006, Technology Development of Mold Fabrication for Free-form Surface, DOE and Microlens, Proceedings of the SPIE, 6110, 61100T, 10.1117/12.647162 · doi:10.1117/12.647162
  141. Parkyn, 2006, Free-form Illumination Lenses Designed by a Pseudo-rectangular Lawnmower Algorithm, Proceedings of the SPIE, 6338, 633803
  142. Parkyn, 1998, Design of Illumination Lenses Via Extrinsic Differential Geometry, Proceedings of the SPIE, 3428, 154, 10.1117/12.327958 · doi:10.1117/12.327958
  143. Parkyn, 1993, Converging TIR Lens for Nonimaging Concentration of Light From Compact Incoherent Sources, Proceedings of the SPIE, 2016, 10.1117/12.161947 · doi:10.1117/12.161947
  144. Patterson, 1985, Design and Testing of a Fast Tool Servo for Diamond Turning, Precision Engineering, 7, 123, 10.1016/0141-6359(85)90030-3 · doi:10.1016/0141-6359(85)90030-3
  145. Peters, 2001, Contribution of ClRP to the Development of Metrology and Surface Quality Evaluation During the Last Fifty Years, CIRP Annals – Manufacturing Technology, 50, 471, 10.1016/S0007-8506(07)62996-5 · doi:10.1016/s0007-8506(07)62996-5
  146. Petz, 2012, Tactile – Optical Probes for Three-dimensional Microparts, Measurement, 45, 2288, 10.1016/j.measurement.2011.10.019 · doi:10.1016/j.measurement.2011.10.019
  147. Plummer, 2005, Free-form optical components in some early commercial products, Proc. Of SPIE, 5865, 586509, 10.1117/12.623875 · doi:10.1117/12.623875
  148. Pollicove, 1988, Survey of Present Lens Molding Techniques, Proceedings of the SPIE, 896, 10.1117/12.944475 · doi:10.1117/12.944475
  149. Rabl, 1994, Reflector Design for Illumination with Extended Sources: The Basic Solutions, Applied Optics, 33, 6012, 10.1364/AO.33.006012 · doi:10.1364/ao.33.006012
  150. Ravishankar, 2010, Automated Inspection of Aircraft Parts Using a Modified ICP Algorithm, The International Journal of Advanced Manufacturing Technology, 46, 227, 10.1007/s00170-009-2067-y · DOI
  151. Richter, 2009, Machine-integrated Measurement of Specular Free-formed Surfaces Using Phase-measuring Deflectometry, vol. 6, 21
  152. Ries, 2002, Tailored Freeform Optical Surfaces, Journal Optical Society of America, 19, 590, 10.1364/JOSAA.19.000590 · doi:10.1364/josaa.19.000590
  153. Ries, 1994, Edge-ray Principle of Nonimaging Optics, Journal Optical Society of America, 11, 2627, 10.1364/JOSAA.11.002627 · doi:10.1364/josaa.11.002627
  154. Rodgers, 2004, Benefits of Freeform Mirror Surfaces in Optical Design, Proceedings of the SPIE, 5494, 73
  155. Saunders, 2005, Fabrication and Metrology of Freeform Aluminium Mirrors for the SCUBA-2 Instrument, Proceedings of the SPIE, 5869, 10.1117/12.612998 · doi:10.1117/12.612998
  156. Savio, 2007, Metrology of Freeform Shaped Parts, CIRP Annals – Manufacturing Technology, 56, 810, 10.1016/j.cirp.2007.10.008 · DOI
  157. Savio, 2007, Feature-oriented Measurement Strategy in Atomic Force Microscopy, CIRP Annals – Manufacturing Technology, 56, 557, 10.1016/j.cirp.2007.05.133 · doi:10.1016/j.cirp.2007.05.133
  158. Scheiding, 2009, Micro Lens Array Milling on Large Wafers, Optik & Photonik, 4, 41, 10.1002/opph.201190061 · doi:10.1002/opph.201190061
  159. Scheiding, 2011, Freeform Manufacturing of a Microoptical Lens Array on a Steep Curved Substrate by Use of a Voice Coil Fast Tool Servo, Optics Express, 19, 23938, 10.1364/OE.19.023938 · DOI
  160. Schellekens, 1998, Design for Precision: Current Status and Trends, CIRP Annals – Manufacturing Technology, 47, 557, 10.1016/S0007-8506(07)63243-0 · doi:10.1016/s0007-8506(07)63243-0
  161. Schinker, 1991, Sub-surface Damage Mechanisms at High-speed Ductile Machining of Optical Glasses, Journal of the International Society for Precision Engineering and Nanotechnology, 13, 208
  162. Schinker, 1987, Turning of Optical Glasses at Room Temperature, Proceedings of the SPIE, 802, 70, 10.1117/12.967104 · doi:10.1117/12.967104
  163. Schruben, 1972, Formulation a Reflector-design Problem for a Lighting Fixture, Journal of the Optical Society of America, 62, 1498, 10.1364/JOSA.62.001498 · doi:10.1364/josa.62.001498
  164. Shaw, 2011, Automatic Registration Method for Hybrid Optical Coordinate Measuring Technology, CIRP Annals – Manufacturing Technology, 60, 539, 10.1016/j.cirp.2011.03.055 · doi:10.1016/j.cirp.2011.03.055
  165. Sherif, 2004, Phase Plate to Extend the Depth of Field of Incoherent Hybrid Imaging Systems, Applied Optics, 43, 2709, 10.1364/AO.43.002709 · doi:10.1364/ao.43.002709
  166. Shibuya, 2010, A Spiral Scanning Probe System for Micro-aspheric Surface Profile Measurement, International Journal of Advanced Manufacturing Technology, 46, 845, 10.1007/s00170-008-1812-y · doi:10.1007/s00170-008-1812-y
  167. Shore, 2010, Precision Engineering for Astronomy and Gravity Science, CIRP Annals – Manufacturing Technology, 59, 694, 10.1016/j.cirp.2010.05.003 · DOI
  168. Shorey, 2005, Deterministic Precision Finishing of Domes and Conformal Optics, Proceedings of the SPIE, 5786, 310, 10.1117/12.607456 · doi:10.1117/12.607456
  169. Smilie, 2011, Variable-diameter Refractive Beam Shaping with Freeform Optical Surfaces, Optics Letters, 36, 4170, 10.1364/OL.36.004170 · doi:10.1364/ol.36.004170
  170. Spanò, 2008, Free-forms Optics Into Astronomical Use: The Case of an All-mirror Anamorphic Collimator, Proceedings of the SPI, 7018, 701840, 10.1117/12.789183 · doi:10.1117/12.789183
  171. Stack, 2009, Freeform DOEs Extend Optical Lithography, Chip Design
  172. Su, 2012, Non-null Full Field X-ray Mirror Metrology Using SCOTS: A Reflection Deflectometry Approach, Optics Express, 20, 12393, 10.1364/OE.20.012393 · doi:10.1364/oe.20.012393
  173. Sun, 2009, Free-form Microlens for Illumination Applications, Applied Optics, 48, 5520, 10.1364/AO.48.005520 · doi:10.1364/ao.48.005520
  174. Suzuki, 1998, Study on Precision Grinding of Micro Aspherical Surface by Inclined Rotational Grinding, Journal Japan Society for Precision Engineering, 64, 619, 10.2493/jjspe.64.619 · doi:10.2493/jjspe.64.619
  175. Suzuki, 2011, Micro/nano Sculpturing of Hardened Steel by Controlling Vibration Amplitude in Elliptical Vibration Cutting, Precision Engineering, 35, 44, 10.1016/j.precisioneng.2010.09.006 · doi:10.1016/j.precisioneng.2010.09.006
  176. Swain, 1979, Microfracture About Scratches in Brittle Solids, Proceedings of the Royal Society, A366, 575, 10.1098/rspa.1979.0070 · doi:10.1098/rspa.1979.0070
  177. Takahashi, 2011, Development of Ultrawide-angle Compact Camera Using Free-form Optics, Optical Review, 18, 55, 10.1007/s10043-011-0029-8 · doi:10.1007/s10043-011-0029-8
  178. Takeuchi, 2002, Manufacture of Multiple-focus Micro Fresnel Lenses by Means of Nonrotational Diamond Grooving, CIRP Annals – Manufacturing Technology, 51, 343, 10.1016/S0007-8506(07)61532-7 · doi:10.1016/s0007-8506(07)61532-7
  179. Takeuchi, 2009, 6-Axis Control Ultraprecision Microgrooving on Sculptured Surfaces with Non-rotational Cutting Tool, CIRP Annals – Manufacturing Technology, 58, 53, 10.1016/j.cirp.2009.03.124 · doi:10.1016/j.cirp.2009.03.124
  180. Tanigami, 1989, Low Wavefront Aberration and High-temperature Stability Molded Micro Fresnel Lens, Photonics Technology Letters, IEEE, 1, 384, 10.1109/68.43387 · doi:10.1109/68.43387
  181. Taniguchi, 1983, Current Status in and Future Trends of Ultraprecision Machining and Ultrafine Materials Processing, CIRP Annals – Manufacturing Technology, 32, 573, 10.1016/S0007-8506(07)60185-1 · doi:10.1016/s0007-8506(07)60185-1
  182. Timinger, 2003, Designing Tailored Free-form Surfaces for General Illumination, Proceedings of the SPIE, 5186, 128, 10.1117/12.505918 · doi:10.1117/12.505918
  183. Toh, 1986, Fine Scale Abrasive Wear of Ceramics by a Plastic Cutting Process, Science of Hard Materials, Institute Physics Conference Series, 75, 856
  184. Tohme, 2004, Slow Slide Servo (S3) machining of freeform optics – abstract, Moore Nanotechnology Systems
  185. Tohme, 2007, Grinding Aspheric and Freeform Micro-optical Molds, Micro-machining Technology for Micro-optics and Nano-optics, Proceedings of the SPIE, 6462, 10.1117/12.712706 · DOI
  186. Tohme, 2008, Trends in Ultra-precision Machining of Freeform Optical Surfaces, Optical Fabrication and Testing OSA Technical Digest (CD), OThC6, 10.1364/OFT.2008.OThC6 · doi:10.1364/oft.2008.othc6
  187. Trumper, 2005, Electromagnetically-driven ultra-fast tool servos for diamond turning. PhD Dissertation, Massachusetts Institute of Technology
  188. Uhlmann, 2011, Phase Measuring Deflectometry Setup for Machine Integrated Measurement of Specular Surfaces, vol. 2.49
  189. van den Berg, 2005, Extreme UV Lithography Preserves Moore's Law, Optics & Laser Europe, 129, 29
  190. Walker, 2005, New Results Extending the Precessions Process to Smoothing Ground Aspheres and Producing Freeform Parts, Proceedings of the SPIE, 5869, 58690E, 10.1117/12.617067 · DOI
  191. Wang, 2010, Design of Compact Freeform Lens for Application Specific Light-emitting Diode Packaging, Optics Express, 18, 413, 10.1364/OE.18.000413 · doi:10.1364/oe.18.000413
  192. Wang, 2010, Angular Color Uniformity Enhancement of White Light Emitting Diodes Integrated with Freeform Lenses, Optics Letters, 35, 1860, 10.1364/OL.35.001860 · doi:10.1364/ol.35.001860
  193. Wang, 2012, Data Filtering of Optical Freeform Measurement Based on a Modified 2D Cascaded Approximating Spline Filter, Proceedings of the SPIE 8416, 84160J
  194. Wang, 2009, Periodic Optical Delay Line Based on a Tilted Parabolic Generatrix Helicoid Reflective Mirror, Applied Optics, 48, 1998, 10.1364/AO.48.001998 · DOI
  195. Weckenmann, 2004, Probing Systems in Dimensional Metrology, CIRP Annals – Manufacturing Technology, 53, 657, 10.1016/S0007-8506(07)60034-1 · doi:10.1016/s0007-8506(07)60034-1
  196. Weckenmann, 1987, Prüfen von Werkstücken mit gekrümmten Flächen auf Koordinatenmessgeräten, Technisches Messen tm, 54, 277, 10.1524/teme.1987.54.78.277 · doi:10.1524/teme.1987.54.78.277
  197. Weckenmann, 2009, Multisensor Data Fusion in Dimensional Metrology, CIRP Annals – Manufacturing Technology, 58, 701, 10.1016/j.cirp.2009.09.008 · DOI · Paper page
  198. Weckenmann, 2006, Probing Systems for Dimensional Micro and Nano Metrology, Measurement Science & Technology, 17, 504, 10.1088/0957-0233/17/3/S08 · doi:10.1088/0957-0233/17/3/s08
  199. Weckenmann, 1983, Mathematische Beschreibung von gekrümmten Oberflächen für die Anwendung in der Koordinatenmesstechnik, CIRP Annals – Manufacturing Technology, 32, 453, 10.1016/S0007-8506(07)63439-8 · doi:10.1016/s0007-8506(07)63439-8
  200. Weckenmann, 2011, Application of Modern High Resolution Tactile Sensors for Micro-objects, International Journal of Precision Technology, 2/2/3, 266, 10.1504/IJPTECH.2011.039463 · doi:10.1504/ijptech.2011.039463

200 of 216 shown

Cited by

See all 823

Metadata

Authors
Fang, F. Z., Zhang, X. D., Weckenmann, A., Zhang, G. X., & Evans, C.
Venue
CIRP Annals
Publisher
Elsevier BV
Published
2013
Volume
62
Issue
2
Pages
823-846
ISSN
0007-8506 (ISSN-L)
DOI
10.1016/j.cirp.2013.05.003
OpenAlex
W2009518030
Cited by
823
References
0
FWCI
21.61
Type
journal article
Language
en
Open access
closed
Licence
www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Funders
  • State Key Program of Basic Research of China (2011CB706703)
  • National Natural Science Foundation of China (90923038)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Manufacturing and measurement of freeform optics. https://app.cochat.ai/papers/10.1016/j.cirp.2013.05.003
The paper
Fang, F. Z., Zhang, X. D., Weckenmann, A., Zhang, G. X., & Evans, C. (2013). Manufacturing and measurement of freeform optics. CIRP Annals. https://doi.org/10.1016/j.cirp.2013.05.003

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.