Preparation and evaluation of α-Al2O3 supported lithium ion sieve membranes for Li+ extraction
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Abstract Spinel lithium manganese oxide ion-sieves have been considered the most promising adsorbents to extract Li+ from brines and sea water. Here, we report a lithium ion-sieve which was successfully loaded onto tubular α-Al2O3 ceramic substrates by dipping crystallization and post-calcination method. The lithium manganese oxide Li4Mn5O12 was first synthesized onto tubular α-Al2O3 ceramic substrates as the ion-sieve precursor (i.e. L-AA), and the corresponding lithium ion-sieve (i.e. H-AA) was obtained after acid pickling. The chemical and morphological properties of the ion-sieve were confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Both L-AA and H-AA showed characteristic peaks of α-Al2O3 and cubic phase Li4Mn5O12, and the peaks representing cubic phase could still exist after pickling. The lithium manganese oxide Li4Mn5O12 could be uniformly loaded not only on the surface of α-Al2O3 substrates but also inside the pores. Moreover, we found that the equilibrium adsorption capacity of H-AA was 22.9 mg/g. After 12 h adsorption, the adsorption balance was reached. After 5 cycles of adsorption, the adsorption capacity of H-AA was 60.88% of the initial adsorption capacity. The process of H-AA adsorption for Li+ correlated with pseudo-second order kinetic model and Langmuir model. Adsorption thermodynamic parameters regarding enthalpy (∆ H), Gibbs free energy (∆ G) and entropy (∆ S) were calculated. For the dynamic adsorption-desorption process of H-AA, the H-AA exhibited excellent adsorption performance to Li+ with the Li+ dynamic adsorption capacity of 9.74 mg/g and the Mn2+ dissolution loss rate of 0.99%. After 3 dynamic adsorption-desorption cycles, 80% of the initial dynamic adsorption capacity was still kept.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recovery and recycling of lithium: a review
Swain, B. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.08.031 · Cited by 1,713
Lithium recovery from salt lake brine by H 2 TiO 3
Chitrakar, R., Makita, Y., Ooi, K., & Sonoda, A. (2014) · Dalton Trans. · doi:10.1039/c4dt00467a · Cited by 345
Lithium: sources, production, uses, and recovery outlook
Talens Peiró, L., Villalba Méndez, G., & Ayres, R. U. (2013) · JOM · doi:10.1007/s11837-013-0666-4 · Cited by 318
CHUNG, K., LEE, J., KIM, W., KIM, S., & CHO, K. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.09.041 · Cited by 128
Preparation and characterization of lithium λ-MnO2 ion-sieves
Wang, C., Zhai, Y., Wang, X., & Zeng, M. (2014) · Frontiers of Chemical Science and Engineering · doi:10.1007/s11705-014-1449-3 · Cited by 41
Cited by
Lithium recovery from brine: Recent developments and challenges
Khalil, A., Mohammed, S., Hashaikeh, R., & Hilal, N. (2022) · Desalination · doi:10.1016/j.desal.2022.115611 · Cited by 396
Direct lithium extraction: A new paradigm for lithium production and resource utilization
Farahbakhsh, J., Arshadi, F., Mofidi, Z., Mohseni-Dargah, M., Kök, C., Assefi, M., Soozanipour, A., Zargar, M., Asadnia, M., Boroumand, Y., et al. (2024) · Desalination · doi:10.1016/j.desal.2023.117249 · Cited by 260
A review on lithium recovery using electrochemical capturing systems
Zavahir, S., Elmakki, T., Gulied, M., Ahmad, Z., Al-Sulaiti, L., Shon, H. K., Chen, Y., Park, H., Batchelor, B., & Han, D. S. (2021) · Desalination · doi:10.1016/j.desal.2020.114883 · Cited by 220
Reich, R., Slunitschek, K., Danisi, R. M., Eiche, E., & Kolb, J. (2023) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2022.2047041 · Cited by 120
Metadata
- Authors
- Xue, F., Zhang, X., Niu, Y., Yi, C., Ju, S., & Xing, W.
- Venue
- Chinese Journal of Chemical Engineering
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 28
- Issue
- 9
- Pages
- 2312-2318
- ISSN
- 1004-9541 (ISSN-L)
- OpenAlex
- W3026553248
- Cited by
- 35
- References
- 5
- FWCI
- 1.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.