The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
MgAl-LDH/Biochar composites for methylene blue removal by adsorption
Abstract
In this work, LDH-biochar composites were synthesized in different molar ratios of Mg:Al (2:1, 3:1 and 4:1) using co-precipitation method. The composites were applied to remove an organic dye from aqueous solutions by adsorption. The composites and the pure bovine bone biochars were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) measurements, thermogravimetric analysis (TG/DTG), dispersive energy spectroscopy (DES) and scanning electron microscopy (SEM). The methylene blue dye adsorption experiments were conducted in a finite bath. The results indicate that pH 12 is more suitable for dye adsorption process, with a removal >95% for all composites. The adsorption kinetic was best described by the pseudo-second order model, reaching the equilibrium in approximately 20 min. The Redlich-Peterson model fit the adsorption equilibrium isotherms satisfactorily. It was obtained a maximum adsorption capacity of 406.47 mg·g −1 at 40 °C. Negative values of ΔG indicate the spontaneity of the adsorption process. The positive value of ΔH (30.72 kJ·mol −1 ) indicates the physical nature of the adsorption and the positive value of ΔS (0.1863 kJ·mol −1 ) indicates that there was a change in the structure of the adsorbent and increased randomness during the fixing of the dye.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Pseudo-second order model for sorption processes
Ho, Y. S., & McKay, G. (1999) · Process Biochemistry · doi:10.1016/s0032-9592(98)00112-5 · Cited by 17,497
About the Theory of So-Called Adsorption of Soluble Substances
Lagergren, S. K. (1898) · Medical Entomology and Zoology · Cited by 5,210
Sorption of dye from aqueous solution by peat
Ho, Y. S., & McKay, G. (1998) · Chemical Engineering Journal · doi:10.1016/s0923-0467(98)00076-1 · Cited by 4,226
The kinetics of sorption of divalent metal ions onto sphagnum moss peat
Ho, Y. (2000) · Water Research · doi:10.1016/s0043-1354(99)00232-8 · Cited by 2,910
Redlich, O., & Peterson, D. L. (1959) · The Journal of Physical Chemistry · doi:10.1021/j150576a611 · Cited by 2,607
Fu, J., Chen, Z., Wang, M., Liu, S., Zhang, J., Zhang, J., Han, R., & Xu, Q. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.07.101 · Cited by 1,096
Porous Materials for Oil Spill Cleanup: A Review of Synthesis and Absorbing Properties
Adebajo, M. O., Frost, R. L., Kloprogge, J. T., Carmody, O., & Kokot, S. (2003) · Journal of Porous Materials · doi:10.1023/a:1027484117065 · Cited by 1,045
Adsorption of hazardous dye crystal violet from wastewater by waste materials
Mittal, A., Mittal, J., Malviya, A., Kaur, D., & Gupta, V. K. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.11.060 · Cited by 803
Adsorption of basic dye (methylene blue) onto activated carbon prepared from rattan sawdust
Hameed, B. H., Ahmad, A. L., & Latiff, K. N. A. (2007) · Dyes and Pigments · doi:10.1016/j.dyepig.2006.05.039 · Cited by 743
Removal of arsenic by magnetic biochar prepared from pinewood and natural hematite
Wang, S., Gao, B., Zimmerman, A. R., Li, Y., Ma, L., Harris, W. G., & Migliaccio, K. W. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.10.104 · Cited by 713
Song, S.-W., Hidajat, K., & Kawi, S. (2005) · Langmuir · doi:10.1021/la051167e · Cited by 659
Li, R., Wang, J. J., Zhou, B., Awasthi, M. K., Ali, A., Zhang, Z., Gaston, L. A., Lahori, A. H., & Mahar, A. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.03.151 · Cited by 635
A consideration of the correct calculation of thermodynamic parameters of adsorption
Milonjic, S. (2007) · Journal of the Serbian Chemical Society · doi:10.2298/jsc0712363m · Cited by 601
Chang, M.-Y., & Juang, R.-S. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.05.029 · Cited by 582
Characterization and environmental applications of clay–biochar composites
Yao, Y., Gao, B., Fang, J., Zhang, M., Chen, H., Zhou, Y., Creamer, A. E., Sun, Y., & Yang, L. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.12.062 · Cited by 416
Kinetic modeling of liquid-phase adsorption of reactive dyes on activated carbon
Yang, X., & Al-Duri, B. (2005) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.01.093 · Cited by 413
Methylene blue biosorption from aqueous solutions by yellow passion fruit waste
Pavan, F. A., Lima, E. C., Dias, S. L. P., & Mazzocato, A. C. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.05.023 · Cited by 403
Machado, F. M., Bergmann, C. P., Fernandes, T. H. M., Lima, E. C., Royer, B., Calvete, T., & Fagan, S. B. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.06.020 · Cited by 362
Wang, S., Gao, B., Li, Y., Creamer, A. E., & He, F. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.01.052 · Cited by 337
Zhang, M., Gao, B., Yao, Y., & Inyang, M. (2013) · Chemosphere · doi:10.1016/j.chemosphere.2013.02.050 · Cited by 309
The adsorption of Pb(II) on Mg2Al layered double hydroxide
Zhao, D., Sheng, G., Hu, J., Chen, C., & Wang, X. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.03.082 · Cited by 294
Wan, S., Wang, S., Li, Y., & Gao, B. (2017) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.11.039 · Cited by 287
Lonappan, L., Rouissi, T., Kaur Brar, S., Verma, M., & Surampalli, R. Y. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2017.10.039 · Cited by 273
de Sá, F. P., Cunha, B. N., & Nunes, L. M. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.11.024 · Cited by 242
Infrared emission spectroscopic study of brucite
Frost, R. L., & Kloprogge, J. T. (1999) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/s1386-1425(99)00016-5 · Cited by 200
Hexagonal ordered mesoporous material as a matrix for the controlled release of amoxicillin
VALLETREGI, M. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.04.036 · Cited by 195
Huang, H., Tang, J., Gao, K., He, R., Zhao, H., & Werner, D. (2017) · RSC Advances · doi:10.1039/c6ra27881g · Cited by 195
Prola, L. D. T., Acayanka, E., Lima, E. C., Umpierres, C. S., Vaghetti, J. C. P., Santos, W. O., Laminsi, S., & Djifon, P. T. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.02.018 · Cited by 191
Xue, L., Gao, B., Wan, Y., Fang, J., Wang, S., Li, Y., Muñoz-Carpena, R., & Yang, L. (2016) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2016.03.021 · Cited by 191
Tan, X., Liu, Y.-G., Gu, Y., Liu, S., Zeng, G., Cai, X., Hu, X., Wang, H., Liu, S.-M., & Jiang, L.-H. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2016.08.070 · Cited by 145
Akhtar, M., Bhanger, M. I., Iqbal, S., & HASANY, S. M. (2005) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.07.025 · Cited by 132
Takehira, K. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.11.012 · Cited by 126
Albadarin, A. B., & Mangwandi, C. (2015) · Journal of Environmental Management · doi:10.1016/j.jenvman.2015.08.040 · Cited by 124
Nitrate sorption by thermally activated Mg/Al chloride hydrotalcite-like compound
Islam, M., & Patel, R. K. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.03.128 · Cited by 124
Mittal, H., Maity, A., & Ray, S. S. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.04.045 · Cited by 123
Sorption of arsenic onto Ni/Fe layered double hydroxide (LDH)-biochar composites
Wang, S., Gao, B., Li, Y. C., Zimmerman, A. R., & Cao, X. (2016) · RSC Advances · doi:10.1039/c5ra17490b · Cited by 117
Equilibrium and thermodynamics of azo dyes biosorption onto Spirulina platensis
Dotto, G. L., Vieira, M. L. G., Esquerdo, V. M., & Pinto, L. A. D. A. (2013) · Brazilian Journal of Chemical Engineering · doi:10.1590/s0104-66322013000100003 · Cited by 116
Self-citationSorptive removal of selected emerging contaminants using biochar in aqueous solution
Kim, E., Jung, C., Han, J., Her, N., Park, C. M., Jang, M., Son, A., & Yoon, Y. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.03.004 · Cited by 112
Sorption of arsenate onto magnetic iron–manganese (Fe–Mn) biochar composites
Wang, S., Gao, B., Li, Y. C., Wan, Y., & Creamer, A. E. (2015) · RSC Advances · doi:10.1039/c5ra12137j · Cited by 109
Preparation of a porous biochar from the acid activation of pork bones
Iriarte‐Velasco, U., Sierra, I., Zudaire, L., & Ayastuy, J. L. (2016) · Food and Bioproducts Processing · doi:10.1016/j.fbp.2016.03.003 · Cited by 104
Zhang, M., Yao, Q., Guan, W., Lu, C., & Lin, J. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5012268 · Cited by 96
Kameda, T., Takeuchi, H., & Yoshioka, T. (2008) · Separation and Purification Technology · doi:10.1016/j.seppur.2008.02.001 · Cited by 89
Li, Y., Gao, B., Wu, T., Wang, B., & Li, X. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.09.009 · Cited by 85
Effect of gliclazide immobilization into layered double hydroxide on drug release
Ambrogi, V., Perioli, L., Ciarnelli, V., Nocchetti, M., & Rossi, C. R. (2009) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2009.06.007 · Cited by 58
Kuznetsova, A. I., Domingues, P. M., Silva, T., Almeida, A., Zheludkevich, M. L., Tedim, J., Ferreira, M. G. S., & Cunha, Â. (2017) · Journal of Applied Microbiology · doi:10.1111/jam.13433 · Cited by 32
Self-citation
Cited by
Baskar, A. V., Bolan, N., Hoang, S. A., Sooriyakumar, P., Kumar, M., Singh, L., Jasemizad, T., Padhye, L. P., Singh, G., Vinu, A., et al. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.153555 · Cited by 615
Review on recent advances of carbon based adsorbent for methylene blue removal from waste water
Santoso, E., Ediati, R., Kusumawati, Y., Bahruji, H., Sulistiono, D. O., & Prasetyoko, D. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2019.100233 · Cited by 500
Wang, L., Ok, Y. S., Tsang, D. C. W., Alessi, D. S., Rinklebe, J., Wang, H., Mašek, O., Hou, R., O'Connor, D., & Hou, D. (2020) · Soil Use and Management · doi:10.1111/sum.12592 · Cited by 393
Haleem, A., Shafiq, A., Chen, S.-Q., & Nazar, M. (2023) · Molecules · doi:10.3390/molecules28031081 · Cited by 374
Liu, J., Jiang, J., Meng, Y., Aihemaiti, A., Xu, Y., Xiang, H., Gao, Y., & Chen, X. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122026 · Cited by 356
Metadata
- Authors
- Meili, L., Lins, P. V., Zanta, C. L. P. S., Soletti, J. I., Ribeiro, L. M. O., Dornelas, C. B., Silva, T. L., & Vieira, M. G. A.
- Venue
- Applied Clay Science
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 168
- Pages
- 11-20
- ISSN
- 0169-1317 (ISSN-L)
- OpenAlex
- W2899134478
- Cited by
- 314
- References
- 46
- FWCI
- 10.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.