The DOI matches its Crossref record; 87 of the 87 references it cites were found in a registry or an index.
Fly ash for sustainable construction: A review of fly ash concrete and its beneficial use case studies
Open accessAbstract
Concrete has a tremendous influence on the environment since the majority of its composition is cement, which is a material that emits high levels of carbon dioxide. It is possible for concrete construction to have a lower impact on the environment if the usage of cement is reduced as much as possible by the addition of mineral admixtures such as fly ash, without sacrificing the durability standards at the same time. The disposal of fly ash, which is produced by power stations that burn coal for fuel, is recognised as one of the most pressing environmental issues. When there is a simultaneous increase in the amount of fly ash and a decline in the capacity of landfills, it is much more difficult to find a solution to this problem. The research on fly ash admixed concrete is analysed and discussed in this publication. There have been many studies conducted on the topic of fly ash concrete and its beneficial effects. In this study, the fresh and hardened properties of fly ash concrete, such as mechanical properties, durability parameters, and microstructural characteristics, are studied. Additionally, the useful application case studies of fly ash concrete published by the American Coal Ash Association are also summarised.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Report of the World Commission on Environment and Development
Secretary-General, U. (1987) · Cited by 1,728
Influence of limestone on the hydration of Portland cements
Lothenbach, B., Le Saout, G., Gallucci, E., & Scrivener, K. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.01.002 · Cited by 1,699
A review on emission analysis in cement industries
Ali, M. B., Saidur, R., & Hossain, M. S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.02.014 · Cited by 941
Degree of hydration and gel/space ratio of high-volume fly ash/cement systems
Lam, L., Wong, Y. L., & Poon, C. S. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00213-1 · Cited by 715
Papadakis, V. G. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00249-5 · Cited by 713
Performance characteristics of high-volume Class F fly ash concrete
Siddique, R. (2003) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.09.002 · Cited by 647
Effect of fly ash fineness on compressive strength and pore size of blended cement paste
Chindaprasirt, P., Jaturapitakkul, C., & Sinsiri, T. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.07.003 · Cited by 612
Studies on the carboaluminate formation in limestone filler-blended cements
Bonavetti, V. L., Rahhal, V. F., & Irassar, E. F. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00491-4 · Cited by 576
Kou, S.-C., & Poon, C.-S. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.12.011 · Cited by 537
Metadata
- Authors
- Nayak, D. K., Abhilash, P. P., Singh, R., Kumar, R., & Kumar, V.
- Venue
- Cleaner Materials
- Publisher
- Elsevier BV
- Published
- 2022-12
- Volume
- 6
- Pages
- 100143
- ISSN
- 2772-3976 (ISSN-L)
- OpenAlex
- W4297361089
- Cited by
- 347
- References
- 87
- FWCI
- 30.01
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fly ash for sustainable construction: A review of fly ash concrete and its beneficial use case studies. https://app.cochat.ai/papers/10.1016/j.clema.2022.100143
- The paper
- Nayak, D. K., Abhilash, P. P., Singh, R., Kumar, R., & Kumar, V. (2022). Fly ash for sustainable construction: A review of fly ash concrete and its beneficial use case studies. Cleaner Materials. https://doi.org/10.1016/j.clema.2022.100143
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.