Recovery of platinum group metals from spent automotive catalysts: A review
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
In the last decades, a worldwide investment in the recovery or substitution of platinum group metals (PGMs) has been financed. PGMs have been classified as critical raw materials (CRMs), thus a circular economy model should be implemented for their effective recovery. PGM recovery from primary ores is expensive, due to low concentrations of their ores (lower than 10 g/tn) and sophisticated processes implicated, while secondary resources have been proven technoeconomically feasible sources for PGM recycling. Secondary resources of PGMs, such as spent automotive catalytic converters, contain considerably higher PGM concentrations than their corresponding ores. It is estimated that spent automotive catalytic converters deliver more than 57% of PGMs’ European supply, being considered a crucial resource for PGM recovery. Novel recovery techniques focus not only on high recovery rates, but also on cost efficiency and environmental protection. From an industrial viewpoint, pyrometallurgy is the dominant recovery technique, hydrometallurgy is secondly chosen and biometallurgy (bioleaching, bioabsorption) is applied for lab-scale recovery -at this moment. In the present review, all major PGM recovery techniques are presented and discussed. Hydrometallurgical processes could gain a foothold in industrial scale recycling, by adopting a direct, sustainable leaching design. Milder leaching conditions, greener solvents and high solid mass leached, are the keys for the hydrometallurgical upscaling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep Eutectic Solvents (DESs) and Their Applications
Smith, E. L., Abbott, A. P., & Ryder, K. S. (2014) · Chemical Reviews · doi:10.1021/cr300162p · Cited by 7,378
Deep eutectic solvents: syntheses, properties and applications
Zhang, Q., De Oliveira Vigier, K., Royer, S., & Jérôme, F. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35178a · Cited by 4,899
Green solvents for sustainable separation processes
Schuur, B., Brouwer, T., Smink, D., & Sprakel, L. M. J. (2019) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2018.12.009 · Cited by 126
Metadata
- Authors
- Yakoumis, I., Panou, M., Moschovi, A. M., & Panias, D.
- Venue
- Cleaner Engineering and Technology
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 3
- Pages
- 100112
- ISSN
- 2666-7908 (ISSN-L)
- OpenAlex
- W3160851854
- Cited by
- 185
- References
- 3
- FWCI
- 12.36
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recovery of platinum group metals from spent automotive catalysts: A review. https://app.cochat.ai/papers/10.1016/j.clet.2021.100112
- The paper
- Yakoumis, I., Panou, M., Moschovi, A. M., & Panias, D. (2021). Recovery of platinum group metals from spent automotive catalysts: A review. Cleaner Engineering and Technology. https://doi.org/10.1016/j.clet.2021.100112
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.