Recovery of platinum group metals from spent automotive catalysts: A review
Open accessThe DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Abstract
In the last decades, a worldwide investment in the recovery or substitution of platinum group metals (PGMs) has been financed. PGMs have been classified as critical raw materials (CRMs), thus a circular economy model should be implemented for their effective recovery. PGM recovery from primary ores is expensive, due to low concentrations of their ores (lower than 10 g/tn) and sophisticated processes implicated, while secondary resources have been proven technoeconomically feasible sources for PGM recycling. Secondary resources of PGMs, such as spent automotive catalytic converters, contain considerably higher PGM concentrations than their corresponding ores. It is estimated that spent automotive catalytic converters deliver more than 57% of PGMs’ European supply, being considered a crucial resource for PGM recovery. Novel recovery techniques focus not only on high recovery rates, but also on cost efficiency and environmental protection. From an industrial viewpoint, pyrometallurgy is the dominant recovery technique, hydrometallurgy is secondly chosen and biometallurgy (bioleaching, bioabsorption) is applied for lab-scale recovery -at this moment. In the present review, all major PGM recovery techniques are presented and discussed. Hydrometallurgical processes could gain a foothold in industrial scale recycling, by adopting a direct, sustainable leaching design. Milder leaching conditions, greener solvents and high solid mass leached, are the keys for the hydrometallurgical upscaling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep Eutectic Solvents (DESs) and Their Applications
Smith, E. L., Abbott, A. P., & Ryder, K. S. (2014) · Chemical Reviews · doi:10.1021/cr300162p · Cited by 7,378
Deep eutectic solvents: syntheses, properties and applications
Zhang, Q., De Oliveira Vigier, K., Royer, S., & Jérôme, F. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35178a · Cited by 4,899
A review of methods of separation of the platinum-group metals through their chloro-complexes
Bernardis, F. L., Grant, R. A., & Sherrington, D. C. (2005) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2005.05.011 · Cited by 441
Recovery of platinum group metals from spent catalysts: A review
Dong, H., Zhao, J., Chen, J., Wu, Y., & Li, B. (2015) · International Journal of Mineral Processing · doi:10.1016/j.minpro.2015.06.009 · Cited by 392
Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review
Jha, M. K., Lee, J.-C., Kim, M.-S., Jeong, J., Kim, B.-S., & Kumar, V. (2013) · Hydrometallurgy · doi:10.1016/j.hydromet.2012.11.012 · Cited by 389
Recycling of Electronic Scrap at Umicore's Integrated Metals Smelter and Refinery
Hagelüken, C. (2006) · Cited by 357
Circular economy strategies for mitigating critical material supply issues
Gaustad, G., Krystofik, M., Bustamante, M., & Badami, K. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.08.002 · Cited by 355
Solvometallurgy: An Emerging Branch of Extractive Metallurgy
Binnemans, K., & Jones, P. T. (2017) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-017-0128-2 · Cited by 340
Recovery by hydrometallurgical extraction of the platinum-group metals from car catalytic converters
Jimenez de Aberasturi, D., Pinedo, R., Ruiz de Larramendi, I., Ruiz de Larramendi, J. I., & Rojo, T. (2011) · Minerals Engineering · doi:10.1016/j.mineng.2010.12.009 · Cited by 222
Recovery of critical metals using biometallurgy
Zhuang, W.-Q., Fitts, J. P., Ajo-Franklin, C. M., Maes, S., Alvarez-Cohen, L., & Hennebel, T. (2015) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2015.03.019 · Cited by 221
Resource Recovery and Recycling from Metallurgical Wastes
(2006) · Waste Management Series · doi:10.1016/s0713-2743(06)x8083-2 · Cited by 180
Palladium and platinum recovery from bicomponent mixtures using chitosan derivatives
Chassary, P., Vincent, T., Sanchez Marcano, J., Macaskie, L. E., & Guibal, E. (2005) · Hydrometallurgy · doi:10.1016/j.hydromet.2004.10.004 · Cited by 178
Glaister, B. J., & Mudd, G. M. (2010) · Minerals Engineering · doi:10.1016/j.mineng.2009.12.007 · Cited by 178
Nikoloski, A. N., & Ang, K.-L. (2014) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2013.764875 · Cited by 169
Benson, M., Bennett, C. R., Harry, J. E., Patel, M. K., & Cross, M. (2000) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(00)00062-8 · Cited by 165
Biosorption of palladium and platinum by sulfate‐reducing bacteria
de Vargas, I., Macaskie, L. E., & Guibal, E. (2003) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.928 · Cited by 158
Recovery of Platinum-Group Metals from Recycled Automotive Catalytic Converters by Carbochlorination
Kim, C.-H., Woo, S. I., & Jeon, S. H. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9905355 · Cited by 158
Separation of platinum and palladium from chloride solution by solvent extraction using Alamine 300
Swain, B., Jeong, J., Kim, S.-K., & Lee, J.-C. (2010) · Hydrometallurgy · doi:10.1016/j.hydromet.2010.03.013 · Cited by 135
Green solvents for sustainable separation processes
Schuur, B., Brouwer, T., Smink, D., & Sprakel, L. M. J. (2019) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2018.12.009 · Cited by 126
Mabbett, A. N., Sanyahumbi, D., Yong, P., & Macaskie, L. E. (2005) · Environmental Science & Technology · doi:10.1021/es0509836 · Cited by 124
Izatt, R. M., Izatt, S. R., Izatt, N. E., Krakowiak, K. E., Bruening, R. L., & Navarro, L. (2015) · Green Chemistry · doi:10.1039/c4gc02188f · Cited by 119
Ultra fast microwave-assisted leaching for recovery of platinum from spent catalyst
Jafarifar, D., Daryanavard, M. R., & Sheibani, S. (2005) · Hydrometallurgy · doi:10.1016/j.hydromet.2005.02.006 · Cited by 110
Upadhyay, A. K., Lee, J., Kim, E., Kim, M., Kim, B., & Kumar, V. (2013) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4057 · Cited by 80
Gauthier, D., Søbjerg, L. S., Jensen, K. M., Lindhardt, A. T., Bunge, M., Finster, K. W., Meyer, R. L., & Skrydstrup, T. (2010) · ChemSusChem · doi:10.1002/cssc.201000091 · Cited by 68
Recovery of Palladium from Spent Activated Carbon-Supported Palladium Catalysts
Sarıoğlan, Ş. (2013) · Platinum Metals Review · doi:10.1595/147106713x663988 · Cited by 61
Biogenic Nanopalladium Based Remediation of Chlorinated Hydrocarbons in Marine Environments
Hosseinkhani, B., Hennebel, T., Nevel, S. V., Verschuere, S., Yakimov, M. M., Cappello, S., Blaghen, M., & Boon, N. (2013) · Environmental Science & Technology · doi:10.1021/es403047u · Cited by 49
Wastes generated by automotive industry – Spent automotive catalysts
Rzelewska-Piekut, M., & Regel‐Rosocka, M. (2018) · Physical Sciences Reviews · doi:10.1515/psr-2018-0021 · Cited by 40
Leaching Kinetics of Platinum and Palladium from Spent Automotive Catalysts
Tyson, D., & Bautista, R. G. (1987) · Separation Science and Technology · doi:10.1080/01496398708069004 · Cited by 31
Hedrich, S., Kraemer, D., Junge, M., Marbler, H., Bau, M., & Schippers, A. (2020) · Hydrometallurgy · doi:10.1016/j.hydromet.2020.105419 · Cited by 18
Metadata
- Authors
- Yakoumis, I., Panou, M., Moschovi, A. M., & Panias, D.
- Venue
- Cleaner Engineering and Technology
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 3
- Pages
- 100112
- ISSN
- 2666-7908 (ISSN-L)
- OpenAlex
- W3160851854
- Cited by
- 185
- References
- 29
- FWCI
- 12.36
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.