The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Solvometallurgy: An Emerging Branch of Extractive Metallurgy
Open accessAbstract
This position paper introduces the reader to the concept of solvometallurgy, the term used to describe the extraction of metals from ores, industrial process residues, production scrap, and urban waste using non-aqueous solutions. Here, non-aqueous is not used to imply anhydrous, but rather a low water content. The unit operations are as follows: solvent leaching; separation of the residue; purification of the leach solution by non-aqueous solvent extraction or non-aqueous ion exchange; and metal recovery by precipitation or electrolysis in non-aqueous electrolytes. Solvometallurgy is similar to hydrometallurgy in that both the branches of extractive metallurgy use low-temperature processes, but with solvometallurgy, there is no discrete water phase. Both branches use organic or inorganic solvents (excluding water in the case of solvometallurgy). However, for solvometallurgical processes to be sustainable, they must be based on green solvents, which means that all toxic or environmentally harmful solvents must be avoided. Solvometallurgy is complementary to pyrometallurgy and hydrometallurgy, but this new approach offers several advantages. First, the consumption of water is very limited, and so the generation of wastewater can be avoided. Second, the leaching and solvent extraction can be combined to form a single step, resulting in more simplified process flow sheets. Third, solvent leaching is often more selective than leaching with acidic aqueous solutions, leading to reduced acid consumption and fewer purification steps. Fourth, solvometallurgy is useful for the treatment of ores rich in soluble silica (e.g., eudialyte) because no silica gel is formed. In short, solvometallurgy is in a position to help develop the near-zero-waste metallurgical processes, and with levels of energy consumption that are much lower than those with the high-temperature processes. The Technology Readiness Level (TRL) of this emerging branch of extractive metallurgy is still low (TRL = 3–4), which is a disadvantage for short-term implementation, but offers a great opportunity for further research, development, and innovation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Room-Temperature Ionic Liquids: Solvents for Synthesis and Catalysis. 2
Hallett, J. P., & Welton, T. (2011) · Chemical Reviews · doi:10.1021/cr1003248 · Cited by 12,578
Room-Temperature Ionic Liquids. Solvents for Synthesis and Catalysis
Welton, T. (1999) · Chemical Reviews · doi:10.1021/cr980032t · Cited by 11,852
Deep Eutectic Solvents (DESs) and Their Applications
Smith, E. L., Abbott, A. P., & Ryder, K. S. (2014) · Chemical Reviews · doi:10.1021/cr300162p · Cited by 7,378
Solvents and Solvent Effects in Organic Chemistry
Reichardt, C. (2002) · Wiley eBooks · doi:10.1002/3527601791 · Cited by 5,789
Abbott, A. P., Capper, G., Davies, D. L., Rasheed, R. K., & Tambyrajah, V. (2003) · Chemical Communications · doi:10.1039/b210714g · Cited by 5,738
Applications of ionic liquids in the chemical industry
Plechkova, N. V., & Seddon, K. R. (2008) · Chem. Soc. Rev. · doi:10.1039/b006677j · Cited by 5,686
Deep eutectic solvents: syntheses, properties and applications
Zhang, Q., De Oliveira Vigier, K., Royer, S., & Jérôme, F. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35178a · Cited by 4,899
Abbott, A. P., Boothby, D., Capper, G., Davies, D. L., & Rasheed, R. K. (2004) · Journal of the American Chemical Society · doi:10.1021/ja048266j · Cited by 4,340
Review of biodiesel composition, properties, and specifications
Hoekman, S. K., Broch, A., Robbins, C., Ceniceros, E., & Natarajan, M. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.143 · Cited by 2,010
Molecular Separation with Organic Solvent Nanofiltration: A Critical Review
Marchetti, P., Jimenez Solomon, M. F., Szekely, G., & Livingston, A. G. (2014) · Chemical Reviews · doi:10.1021/cr500006j · Cited by 1,758
Cited by
Neumann, J., Petranikova, M., Meeus, M., Gamarra, J. D., Younesi, R., Winter, M., & Nowak, S. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102917 · Cited by 805
The Materials Science behind Sustainable Metals and Alloys
Raabe, D. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00799 · Cited by 526
Peeters, N., Binnemans, K., & Riaño, S. (2020) · Green Chemistry · doi:10.1039/d0gc00940g · Cited by 355
Self-citationThe green solvent: a critical perspective
Winterton, N. (2021) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-021-02188-8 · Cited by 307
Metadata
- Authors
- Binnemans, K., & Jones, P. T.
- Venue
- Journal of Sustainable Metallurgy
- Published
- 2017-04-19
- Volume
- 3
- Issue
- 3
- Pages
- 570-600
- ISSN
- 2199-3823 (ISSN-L)
- 2199-3831
- OpenAlex
- W2606946454
- Cited by
- 340
- References
- 63
- FWCI
- 13.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Solvometallurgy: An Emerging Branch of Extractive Metallurgy. https://app.cochat.ai/papers/10.1007/s40831-017-0128-2
- The paper
- Binnemans, K., & Jones, P. T. (2017). Solvometallurgy: An Emerging Branch of Extractive Metallurgy. Journal of Sustainable Metallurgy. https://doi.org/10.1007/s40831-017-0128-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.