The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Revisiting the problem of a crack impinging on an interface:A modeling framework for the interaction between the phase field approach for brittle fracture and the interface cohesive zone model
Open accessAbstract
The problem of a crack impinging on an interface has been thoroughly investigated in the last three decades due to its important role in the mechanics and physics of solids. In the current investigation, this problem is revisited in view of the recent progresses on the phase field approach of brittle fracture. In this concern, a novel formulation combining the phase field approach for modeling brittle fracture in the bulk and a cohesive zone model for pre-existing adhesive interfaces is herein proposed to investigate the competition between crack penetration and deflection at an interface. The model, implemented within the finite element method framework using a monolithic fully implicit solution strategy, is applied to provide a further insight into the understanding of the role of model parameters on the above competition. In particular, in this study, the role of the fracture toughness ratio between the interface and the adjoining bulks and of the characteristic fracture-length scales of the dissipative models is analyzed. In the case of a brittle interface, the asymptotic predictions based on linear elastic fracture mechanics criteria for crack penetration, single deflection or double deflection are fully captured by the present method. Moreover, by increasing the size of the process zone along the interface, or by varying the internal length scale of the phase field model, new complex phenomena are emerging, such as simultaneous crack penetration and deflection and the transition from single crack penetration to deflection and penetration with subsequent branching into the bulk. The obtained computational trends are in very good agreement with previous experimental observations and the theoretical considerations on the competition and interplay between both fracture mechanics models open new research perspectives for the simulation and understanding of complex fracture patterns.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zienkiewicz, O. C. (1989) · Cited by 14,802
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
A finite element method for crack growth without remeshing
Mo�s, N., Dolbow, J., & Belytschko, T. (1999) · International Journal for Numerical Methods in Engineering · doi:10.1002/(sici)1097-0207(19990910)46:1<131::aid-nme726>3.0.co;2-j · Cited by 6,446
Belytschko, T., Lu, Y. Y., & Gu, L. (1994) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620370205 · Cited by 5,648
Revisiting brittle fracture as an energy minimization problem
Francfort, G. A., & Marigo, J.-J. (1998) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(98)00034-9 · Cited by 3,530
Miehe, C., Hofacker, M., & Welschinger, F. (2010) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2010.04.011 · Cited by 3,100
Miehe, C., Welschinger, F., & Hofacker, M. (2010) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2861 · Cited by 2,942
Surfaces generated by moving least squares methods
Lancaster, P., & Salkauskas, K. (1981) · Mathematics of Computation · doi:10.1090/s0025-5718-1981-0616367-1 · Cited by 2,591
Numerical simulations of fast crack growth in brittle solids
Xu, X., & Needleman, A. (1994) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(94)90003-5 · Cited by 2,479
Hyperelastic modelling of arterial layers with distributed collagen fibre orientations
Gasser, T. C., Ogden, R. W., & Holzapfel, G. A. (2006) · Journal of The Royal Society Interface · doi:10.1098/rsif.2005.0073 · Cited by 2,411
The thermodynamics of elastic materials with heat conduction and viscosity
Coleman, B. D., & Noll, W. (1963) · Archive for Rational Mechanics and Analysis · doi:10.1007/bf01262690 · Cited by 2,030
Amor, H., Marigo, J.-J., & Maurini, C. (2009) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2009.04.011 · Cited by 1,662
Approximation of functional depending on jumps by elliptic functional via t‐convergence
Ambrosio, L., & Tortorelli, V. M. (1990) · Communications on Pure and Applied Mathematics · doi:10.1002/cpa.3160430805 · Cited by 1,471
The Thermodynamics of Elastic Materials with Heat Conduction and Viscosity
Coleman, B. D., & Noll, W. (1974) · The Foundations of Mechanics and Thermodynamics · doi:10.1007/978-3-642-65817-4_9 · Cited by 1,470
Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis
Ortiz, M., & Pandolfi, A. (1999) · International Journal for Numerical Methods in Engineering · doi:10.1002/(sici)1097-0207(19990330)44:9<1267::aid-nme486>3.0.co;2-7 · Cited by 1,425
Crack deflection at an interface between dissimilar elastic materials
Ming-Yuan, H., & Hutchinson, J. W. (1989) · International Journal of Solids and Structures · doi:10.1016/0020-7683(89)90021-8 · Cited by 1,398
Progress in Nonlinear Differential Equations and their Applications
Aftalion, A. (2006) · HAL (Le Centre pour la Communication Scientifique Directe) · Cited by 1,256
Nonlinear Elastic Deformations
Ogden, R. W., & Sternberg, E. (1985) · Journal of Applied Mechanics · doi:10.1115/1.3169137 · Cited by 973
The Variational Approach to Fracture
Bourdin, B., Francfort, G. A., & Marigo, J.-J. (2008) · Springer eBooks · doi:10.1007/978-1-4020-6395-4 · Cited by 944
Simo, J. C., Oliver, J., & Armero, F. (1993) · Computational Mechanics · doi:10.1007/bf00372173 · Cited by 868
Miehe, C., Hofacker, M., Schänzel, L.-M., & Aldakheel, F. (2015) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.11.017 · Cited by 674
A continuum phase field model for fracture
Kuhn, C., & Müller, R. (2010) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2010.08.009 · Cited by 635
Non-linear elastic deformations: R. W. Ogden: Ellis Horwood Limited, Chichester, 1984, 532 pp
Gwinner, J. (1988) · Acta Applicandae Mathematicae · doi:10.1007/bf00047287 · Cited by 508
A unified potential-based cohesive model of mixed-mode fracture
Park, K., Paulino, G. H., & Roesler, J. R. (2008) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2008.10.003 · Cited by 498
Overcoming the brittleness of glass through bio-inspiration and micro-architecture
Mirkhalaf, M., Dastjerdi, A. K., & Barthelat, F. (2014) · Nature Communications · doi:10.1038/ncomms4166 · Cited by 384
Arroyo, M., & Ortiz, M. (2006) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1534 · Cited by 373
Nguyen, T. T., Yvonnet, J., Zhu, Q.-Z., Bornert, M., & Chateau, C. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2015.10.007 · Cited by 359
Hofacker, M., & Miehe, C. (2013) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.4387 · Cited by 306
Abaqus implementation of phase-field model for brittle fracture
Msekh, M. A., Sargado, J. M., Jamshidian, M., Areias, P. M., & Rabczuk, T. (2015) · Computational Materials Science · doi:10.1016/j.commatsci.2014.05.071 · Cited by 296
A level set based model for damage growth: The thick level set approach
Moës, N., Stolz, C., Bernard, P. E., & Chevaugeon, N. (2010) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.3069 · Cited by 277
Phase-field analysis of finite-strain plates and shells including element subdivision
Areias, P., Rabczuk, T., & Msekh, M. A. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.01.020 · Cited by 276
Finite elements with embedded strong discontinuities for the modeling of failure in solids
Linder, C., & Armero, F. (2007) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2042 · Cited by 262
Analytical solutions for cohesive zone models
Williams, J. G., & Hadavinia, H. (2002) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00095-3 · Cited by 247
The roles of toughness and cohesive strength on crack deflection at interfaces
PARMIGIANI, J., & THOULESS, M. (2006) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2005.09.002 · Cited by 191
Energy criterion for crack deflection at an interface between two orthotropic media
Martínez, D. G., & Gupta, V. K. (1994) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(94)90034-5 · Cited by 133
Reinoso, J., Paggi, M., & Linder, C. (2017) · Computational Mechanics · doi:10.1007/s00466-017-1386-3 · Cited by 115
Self-citationA variational model for fracture mechanics: Numerical experiments
Piero, G. D., Lancioni, G., & March, R. (2007) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2007.04.011 · Cited by 110
Paggi, M., & Carpinteri, A. (2008) · Applied Mechanics Reviews · doi:10.1115/1.2885134 · Cited by 92
Self-citationA consistent interface element formulation for geometrical and material nonlinearities
Reinoso, J., & Paggi, M. (2014) · Computational Mechanics · doi:10.1007/s00466-014-1077-2 · Cited by 89
Self-citation
Cited by
A length scale insensitive phase-field damage model for brittle fracture
Wu, J.-Y., & Nguyen, V. P. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.06.006 · Cited by 662
Phase-field modeling of fracture
(2020) · Advances in Applied Mechanics · doi:10.1016/bs.aams.2019.08.001 · Cited by 620
Metadata
- Authors
- Paggi, M., & Reinoso, J.
- Venue
- Computer Methods in Applied Mechanics and Engineering
- Publisher
- Elsevier BV
- Published
- 2017-07
- Volume
- 321
- Pages
- 145-172
- ISSN
- 0045-7825 (ISSN-L)
- OpenAlex
- W2605726200
- Cited by
- 259
- References
- 39
- FWCI
- 17.58
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.