The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
An experimental and chemical kinetic modeling study of 1,3-butadiene combustion: Ignition delay time and laminar flame speed measurements
Open accessAbstract
Abstract Ignition delay times for 1,3-butadiene oxidation were measured in five different shock tubes and in a rapid compression machine (RCM) at thermodynamic conditions relevant to practical combustors. The ignition delay times were measured at equivalence ratios of 0.5, 1.0, and 2.0 in ‘air’ at pressures of 10, 20 and 40 atm in both the shock tubes and in the RCM. Additional measurements were made at equivalence ratios of 0.3, 0.5, 1.0 and 2.0 in argon, at pressures of 1, 2 and 4 atm in a number of different shock tubes. Laminar flame speeds were measured at unburnt temperatures of 295 K, 359 K and 399 K at atmospheric pressure in the equivalence ratio range of 0.6–1.7, and at a pressure of 5 atm at equivalence ratios in the range 0.6–1.4. These experimental data were then used as validation targets for a newly developed detailed chemical kinetic mechanism for 1,3-butadiene oxidation. A detailed chemical kinetic mechanism (AramcoMech 3.0) has been developed to describe the combustion of 1,3-butadiene and is validated by a comparison of simulation results to the new experimental measurements. Important reaction classes highlighted via sensitivity analyses at different temperatures include: (a) ȮH radical addition to the double bonds on 1,3-butadiene and their subsequent reactions. The branching ratio for addition to the terminal and central double bonds is important in determining the reactivity at low-temperatures. The alcohol-alkene radical adducts that are subsequently formed can either react with HȮ2 radicals in the case of the resonantly stabilized radicals or O2 for other radicals. (b) HȮ2 radical addition to the double bonds in 1,3-butadiene and their subsequent reactions. This reaction class is very important in determining the fuel reactivity at low and intermediate temperatures (600–900 K). Four possible addition reactions have been considered. (c) 3O atom addition to the double bonds in 1,3-butadiene is very important in determining fuel reactivity at intermediate to high temperatures (> 800 K). In this reaction class, the formation of two stable molecules, namely CH2O + allene, inhibits reactivity whereas the formation of two radicals, namely Ċ2H3 and ĊH2CHO, promotes reactivity. (d) Ḣ atom addition to the double bonds in 1,3-butadiene is very important in the prediction of laminar flame speeds. The formation of ethylene and a vinyl radical promotes reactivity and it is competitive with H-atom abstraction by Ḣ atoms from 1,3-butadiene to form the resonantly stabilized Ċ4H5-i radical and H2 which inhibits reactivity. Ab initio chemical kinetics calculations were carried out to determine the thermochemistry properties and rate constants for some of the important species and reactions involved in the model development. The present model is a decent first model that captures most of the high-temperature IDTs and flame speeds quite well, but there is room for considerable improvement especially for the lower temperature chemistry before a robust model is developed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dunning, T. H. (1989) · The Journal of Chemical Physics · doi:10.1063/1.456153 · Cited by 31,648
Long-range corrected hybrid density functionals with damped atom–atom dispersion corrections
Chai, J.-D., & Head-Gordon, M. (2008) · Physical Chemistry Chemical Physics · doi:10.1039/b810189b · Cited by 14,648
D.P. (1970) · Journal of Molecular Structure · doi:10.1016/0022-2860(70)85028-1 · Cited by 3,578
Woon, D. E., & Dunning, T. H. (1995) · The Journal of Chemical Physics · doi:10.1063/1.470645 · Cited by 2,902
Gaussian-3 (G3) theory for molecules containing first and second-row atoms
Curtiss, L. A., Raghavachari, K., Redfern, P. C., Rassolov, V., & Pople, J. A. (1998) · The Journal of Chemical Physics · doi:10.1063/1.477422 · Cited by 2,865
A complete basis set model chemistry. VI. Use of density functional geometries and frequencies
Montgomery, J. A., Frisch, M. J., Ochterski, J. W., & Petersson, G. A. (1999) · The Journal of Chemical Physics · doi:10.1063/1.477924 · Cited by 2,725
Curtiss, L. A., Redfern, P. C., & Raghavachari, K. (2007) · The Journal of Chemical Physics · doi:10.1063/1.2436888 · Cited by 2,115
A complete basis set model chemistry. VII. Use of the minimum population localization method
Montgomery, J. A., Frisch, M. J., Ochterski, J. W., & Petersson, G. A. (2000) · The Journal of Chemical Physics · doi:10.1063/1.481224 · Cited by 1,926
Celani, P., & Werner, H.-J. (2000) · The Journal of Chemical Physics · doi:10.1063/1.481132 · Cited by 877
Third-order multireference perturbation theory The CASPT3 method
Werner, H. (1996) · Molecular Physics · doi:10.1080/00268979609482499 · Cited by 696
Metadata
- Authors
- Zhou, C.-W., Li, Y., Burke, U., Banyon, C., Somers, K. P., Ding, S., Khan, S., Hargis, J. W., Sikes, T., Mathieu, O., Petersen, E. L., AlAbbad, M., Farooq, A., Pan, Y., Zhang, Y., Huang, Z., Lopez, J., Loparo, Z., Vasu, S. S., & Curran, H. J.
- Venue
- Combustion and Flame
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 197
- Pages
- 423-438
- ISSN
- 0010-2180 (ISSN-L)
- OpenAlex
- W2892059035
- Cited by
- 671
- References
- 16
- FWCI
- 32.73
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An experimental and chemical kinetic modeling study of 1,3-butadiene combustion: Ignition delay time and laminar flame speed measurements. https://app.cochat.ai/papers/10.1016/j.combustflame.2018.08.006
- The paper
- Zhou, C.-W., Li, Y., Burke, U., Banyon, C., Somers, K. P., Ding, S., Khan, S., Hargis, J. W., Sikes, T., Mathieu, O., Petersen, E. L., AlAbbad, M., Farooq, A., Pan, Y., Zhang, Y., Huang, Z., Lopez, J., Loparo, Z., Vasu, S. S., & Curran, H. J. (2018). An experimental and chemical kinetic modeling study of 1,3-butadiene combustion: Ignition delay time and laminar flame speed measurements. Combustion and Flame. https://doi.org/10.1016/j.combustflame.2018.08.006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.