The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Auto-ignition kinetics of ammonia and ammonia/hydrogen mixtures at intermediate temperatures and high pressures
Abstract
Abstract Auto-ignition properties of NH3/O2 and NH3/H2/O2 mixtures have been studied in a rapid compression machine at pressures from 20 to 60 bar, temperatures from 950 to 1150 K, and equivalence ratios from 0.5 to 2. The effect of the ammonia/hydrogen ratio in the fuel mixture has been also investigated. The experiments demonstrate that a higher H2 mole fraction in the fuel mixture increases its reactivity, while the equivalence ratio shows different influence as follows. When the fuel mixture contains 20% H2, the fuel-richer mixtures have shorter ignition delay times, while for mixtures containing 1% H2 in fuel the equivalence ratio dependence is opposite. With 5% H2 in fuel, the stoichiometric mixture presents the shortest ignition delay time. In mixtures without hydrogen, i.e., pure NH3, leaner mixtures show higher reactivity. In addition, numerical simulations were performed based on the literature mechanisms of Glarborg et al. (2018), Mathieu and Petersen (2015), and Klippenstein et al. (2011). While these models can predict well the ignition delay time of NH3/O2 mixtures, none of the models can predict the behavior of NH3/H2/O2 mixtures satisfactorily. The predictions are most sensitive to the branching reactions NH2 + NO and to the reaction H2NO + O2 = HNO + HO2. Hydrogen addition enriches the O/H radical pool consuming NH3 and NH2, but it has small effect on NOx emissions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling nitrogen chemistry in combustion
Glarborg, P., Miller, J. A., Ruscic, B., & Klippenstein, S. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.01.002 · Cited by 1,998
Otomo, J., Koshi, M., Mitsumori, T., Iwasaki, H., & Yamada, K. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.12.066 · Cited by 837
Mathieu, O., & Petersen, E. L. (2015) · Combustion and Flame · doi:10.1016/j.combustflame.2014.08.022 · Cited by 768
Implementation of the NCN pathway of prompt-NO formation in the detailed reaction mechanism
Konnov, A. A. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.03.016 · Cited by 689
An experimental and kinetic modeling study of premixed NH3/CH4/O2/Ar flames at low pressure
Tian, Z., Li, Y., Zhang, L., Glarborg, P., & Qi, F. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.03.005 · Cited by 635
The role of NNH in NO formation and control
Klippenstein, S. J., Harding, L. B., Glarborg, P., & Miller, J. A. (2011) · Combustion and Flame · doi:10.1016/j.combustflame.2010.12.013 · Cited by 497
Ammonia/hydrogen mixtures in an SI-engine: Engine performance and analysis of a proposed fuel system
Mørch, C. S., Bjerre, A., Gøttrup, M. P., Sorenson, S. C., & Schramm, J. (2011) · Fuel · doi:10.1016/j.fuel.2010.09.042 · Cited by 492
Ammonia–methane combustion in tangential swirl burners for gas turbine power generation
Valera-Medina, A., Marsh, R., Runyon, J., Pugh, D., Beasley, P., Hughes, T., & Bowen, P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.02.073 · Cited by 480
Ammonia chemistry in oxy-fuel combustion of methane
Mendiara, T., & Glarborg, P. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.07.006 · Cited by 470
Shrestha, K. P., Seidel, L., Zeuch, T., & Mauss, F. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01056 · Cited by 441
Reiter, A. J., & Kong, S.-C. (2008) · Energy & Fuels · doi:10.1021/ef800140f · Cited by 440
Analysis of the behaviour of a 4-stroke Si engine fuelled with ammonia and hydrogen
Frigo, S., & Gentili, R. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.10.114 · Cited by 424
Ammonia oxidation at high pressure and intermediate temperatures
Song, Y., Hashemi, H., Christensen, J. M., Zou, C., Marshall, P., & Glarborg, P. (2016) · Fuel · doi:10.1016/j.fuel.2016.04.100 · Cited by 410
Comparative life cycle assessment of various ammonia production methods
Bicer, Y., Dincer, I., Zamfirescu, C., Vezina, G., & Raso, F. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.023 · Cited by 405
The oxidation of hydrogen cyanide and related chemistry
DAGAUT, P., GLARBORG, P., & ALZUETA, M. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2007.02.004 · Cited by 395
Gross, C. W., & Kong, S.-C. (2013) · Fuel · doi:10.1016/j.fuel.2012.08.026 · Cited by 388
Nakamura, H., Hasegawa, S., & Tezuka, T. (2017) · Combustion and Flame · doi:10.1016/j.combustflame.2017.06.021 · Cited by 366
Premixed ammonia/hydrogen swirl combustion under rich fuel conditions for gas turbines operation
Valera-Medina, A., Gutesa, M., Xiao, H., Pugh, D., Giles, A., Goktepe, B., Marsh, R., & Bowen, P. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.02.041 · Cited by 326
Kumar, P., & Meyer, T. R. (2013) · Fuel · doi:10.1016/j.fuel.2012.06.103 · Cited by 314
Shu, B., Vallabhuni, S. K., He, X., Issayev, G., Moshammer, K., Farooq, A., & Fernandes, R. X. (2019) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2018.07.074 · Cited by 234
Self-citationModeling of ammonia combustion at low pressure
Duynslaegher, C., Contino, F., Vandooren, J., & Jeanmart, H. (2012) · Combustion and Flame · doi:10.1016/j.combustflame.2012.06.003 · Cited by 229
Pochet, M., Dias, V., Moreau, B., Foucher, F., Jeanmart, H., & Contino, F. (2019) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2018.05.138 · Cited by 228
Grannell, S. M., Assanis, D. N., Bohac, S. V., & Gillespie, D. E. (2008) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.2898837 · Cited by 212
The thermal DeNOx process: Influence of partial pressures and temperature
Kasuya, F., Glarborg, P., Johnsson, J. E., & Dam-Johansen, K. (1995) · Chemical Engineering Science · doi:10.1016/0009-2509(95)00008-s · Cited by 176
Novel dual fuel diesel-ammonia combustion system in advanced TDI engines
Boretti, A. A. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.11.208 · Cited by 138
Brackmann, C., Alekseev, V. A., Zhou, B., Nordström, E., Bengtsson, P.-E., Li, Z., Aldén, M., & Konnov, A. A. (2015) · Combustion and Flame · doi:10.1016/j.combustflame.2015.10.012 · Cited by 133
Xiao, H., & Valera-Medina, A. (2017) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4035911 · Cited by 117
Nakamura, H., & Hasegawa, S. (2016) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2016.06.153 · Cited by 97
Mathieu, O. E., Levacque, A., & Petersen, E. L. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.07.071 · Cited by 88
Product Branching Ratios in the NH2+ NO Reaction: A Re-Evaluation
Park, J., & Lin, M. C. (1999) · The Journal of Physical Chemistry A · doi:10.1021/jp990954f · Cited by 27
Cited by
Review on Ammonia as a Potential Fuel: From Synthesis to Economics
Valera-Medina, A., Amer-Hatem, F., Azad, A. K., Dedoussi, I. C., de Joannon, M., Fernandes, R. X., Glarborg, P., Hashemi, H., He, X., Mashruk, S., et al. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03685 · Cited by 1,061
Self-citationA review on ammonia, ammonia-hydrogen and ammonia-methane fuels
Chai, W. S., Bao, Y., Jin, P., Tang, G., & Zhou, L. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111254 · Cited by 1,028
An experimental, theoretical and kinetic-modeling study of the gas-phase oxidation of ammonia
Stagni, A., Cavallotti, C., Arunthanayothin, S., Song, Y., Herbinet, O., Battin-Leclerc, F., & Faravelli, T. (2020) · Reaction Chemistry & Engineering · doi:10.1039/c9re00429g · Cited by 742
Shrestha, K. P., Lhuillier, C., Barbosa, A. A., Brequigny, P., Contino, F., Mounaïm-Rousselle, C., Seidel, L., & Mauss, F. (2021) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2020.06.197 · Cited by 641
Review on the recent advances on ammonia combustion from the fundamentals to the applications
Elbaz, A. M., Wang, S., Guiberti, T. F., & Roberts, W. L. (2022) · Fuel Communications · doi:10.1016/j.jfueco.2022.100053 · Cited by 639
Metadata
- Authors
- He, X., Shu, B., Nascimento, D., Moshammer, K., Costa, M., & Fernandes, R. X.
- Venue
- Combustion and Flame
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 206
- Pages
- 189-200
- ISSN
- 0010-2180 (ISSN-L)
- OpenAlex
- W2944676190
- Cited by
- 370
- References
- 30
- FWCI
- 13.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.