The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Auto-ignition kinetics of ammonia and ammonia/hydrogen mixtures at intermediate temperatures and high pressures
Abstract
Abstract Auto-ignition properties of NH3/O2 and NH3/H2/O2 mixtures have been studied in a rapid compression machine at pressures from 20 to 60 bar, temperatures from 950 to 1150 K, and equivalence ratios from 0.5 to 2. The effect of the ammonia/hydrogen ratio in the fuel mixture has been also investigated. The experiments demonstrate that a higher H2 mole fraction in the fuel mixture increases its reactivity, while the equivalence ratio shows different influence as follows. When the fuel mixture contains 20% H2, the fuel-richer mixtures have shorter ignition delay times, while for mixtures containing 1% H2 in fuel the equivalence ratio dependence is opposite. With 5% H2 in fuel, the stoichiometric mixture presents the shortest ignition delay time. In mixtures without hydrogen, i.e., pure NH3, leaner mixtures show higher reactivity. In addition, numerical simulations were performed based on the literature mechanisms of Glarborg et al. (2018), Mathieu and Petersen (2015), and Klippenstein et al. (2011). While these models can predict well the ignition delay time of NH3/O2 mixtures, none of the models can predict the behavior of NH3/H2/O2 mixtures satisfactorily. The predictions are most sensitive to the branching reactions NH2 + NO and to the reaction H2NO + O2 = HNO + HO2. Hydrogen addition enriches the O/H radical pool consuming NH3 and NH2, but it has small effect on NOx emissions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling nitrogen chemistry in combustion
Glarborg, P., Miller, J. A., Ruscic, B., & Klippenstein, S. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.01.002 · Cited by 1,998
Otomo, J., Koshi, M., Mitsumori, T., Iwasaki, H., & Yamada, K. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.12.066 · Cited by 837
Mathieu, O., & Petersen, E. L. (2015) · Combustion and Flame · doi:10.1016/j.combustflame.2014.08.022 · Cited by 768
Implementation of the NCN pathway of prompt-NO formation in the detailed reaction mechanism
Konnov, A. A. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.03.016 · Cited by 689
An experimental and kinetic modeling study of premixed NH3/CH4/O2/Ar flames at low pressure
Tian, Z., Li, Y., Zhang, L., Glarborg, P., & Qi, F. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.03.005 · Cited by 635
The role of NNH in NO formation and control
Klippenstein, S. J., Harding, L. B., Glarborg, P., & Miller, J. A. (2011) · Combustion and Flame · doi:10.1016/j.combustflame.2010.12.013 · Cited by 497
Ammonia/hydrogen mixtures in an SI-engine: Engine performance and analysis of a proposed fuel system
Mørch, C. S., Bjerre, A., Gøttrup, M. P., Sorenson, S. C., & Schramm, J. (2011) · Fuel · doi:10.1016/j.fuel.2010.09.042 · Cited by 492
Ammonia–methane combustion in tangential swirl burners for gas turbine power generation
Valera-Medina, A., Marsh, R., Runyon, J., Pugh, D., Beasley, P., Hughes, T., & Bowen, P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.02.073 · Cited by 480
Ammonia chemistry in oxy-fuel combustion of methane
Mendiara, T., & Glarborg, P. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.07.006 · Cited by 470
Shrestha, K. P., Seidel, L., Zeuch, T., & Mauss, F. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01056 · Cited by 441
Cited by
Review on Ammonia as a Potential Fuel: From Synthesis to Economics
Valera-Medina, A., Amer-Hatem, F., Azad, A. K., Dedoussi, I. C., de Joannon, M., Fernandes, R. X., Glarborg, P., Hashemi, H., He, X., Mashruk, S., et al. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03685 · Cited by 1,061
Self-citationA review on ammonia, ammonia-hydrogen and ammonia-methane fuels
Chai, W. S., Bao, Y., Jin, P., Tang, G., & Zhou, L. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111254 · Cited by 1,028
An experimental, theoretical and kinetic-modeling study of the gas-phase oxidation of ammonia
Stagni, A., Cavallotti, C., Arunthanayothin, S., Song, Y., Herbinet, O., Battin-Leclerc, F., & Faravelli, T. (2020) · Reaction Chemistry & Engineering · doi:10.1039/c9re00429g · Cited by 742
Shrestha, K. P., Lhuillier, C., Barbosa, A. A., Brequigny, P., Contino, F., Mounaïm-Rousselle, C., Seidel, L., & Mauss, F. (2021) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2020.06.197 · Cited by 641
Review on the recent advances on ammonia combustion from the fundamentals to the applications
Elbaz, A. M., Wang, S., Guiberti, T. F., & Roberts, W. L. (2022) · Fuel Communications · doi:10.1016/j.jfueco.2022.100053 · Cited by 639
Experimental study on ammonia/hydrogen/air combustion in spark ignition engine conditions
Lhuillier, C., Brequigny, P., Contino, F., & Mounaïm-Rousselle, C. (2020) · Fuel · doi:10.1016/j.fuel.2020.117448 · Cited by 618
Cardoso, J. S., Silva, V., Rocha, R. C., Hall, M. J., Costa, M., & Eusébio, D. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126562 · Cited by 574
Self-citationOkafor, E. C., Somarathne, K. D. K. A., Ratthanan, R., Hayakawa, A., Kudo, T., Kurata, O., Iki, N., Tsujimura, T., Furutani, H., & Kobayashi, H. (2020) · Combustion and Flame · doi:10.1016/j.combustflame.2019.10.012 · Cited by 464
Chemical mechanism development and reduction for combustion of NH3/H2/CH4 mixtures
Li, R., Konnov, A. A., He, G., Qin, F., & Zhang, D. (2019) · Fuel · doi:10.1016/j.fuel.2019.116059 · Cited by 354
Progress and Prospective of Nitrogen-Based Alternative Fuels
Elishav, O., Mosevitzky Lis, B., Miller, E. M., Arent, D. J., Valera-Medina, A., Grinberg Dana, A., Shter, G. E., & Grader, G. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00538 · Cited by 345
Wang, S., Wang, Z., Elbaz, A. M., Han, X., He, Y., Costa, M., Konnov, A. A., & Roberts, W. L. (2020) · Combustion and Flame · doi:10.1016/j.combustflame.2020.08.004 · Cited by 342
Self-citationEffect of hydrogen blending on the high temperature auto-ignition of ammonia at elevated pressure
Chen, J., Jiang, X., Qin, X., & Huang, Z. (2021) · Fuel · doi:10.1016/j.fuel.2020.119563 · Cited by 331
Dai, L., Hashemi, H., Glarborg, P., Gersen, S., Marshall, P., Mokhov, A., & Levinsky, H. (2021) · Combustion and Flame · doi:10.1016/j.combustflame.2020.12.048 · Cited by 282
Issayev, G., Giri, B. R., Elbaz, A. M., Shrestha, K. P., Mauss, F., Roberts, W. L., & Farooq, A. (2022) · Renewable Energy · doi:10.1016/j.renene.2021.09.117 · Cited by 256
Ammonia as Green Fuel in Internal Combustion Engines: State-of-the-Art and Future Perspectives
Tornatore, C., Marchitto, L., Sabia, P., & De Joannon, M. (2022) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2022.944201 · Cited by 204
On the use of ammonia as a fuel – A perspective
Herbinet, O., Bartocci, P., & Grinberg Dana, A. (2022) · Fuel Communications · doi:10.1016/j.jfueco.2022.100064 · Cited by 184
Metadata
- Authors
- He, X., Shu, B., Nascimento, D., Moshammer, K., Costa, M., & Fernandes, R. X.
- Venue
- Combustion and Flame
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 206
- Pages
- 189-200
- ISSN
- 0010-2180 (ISSN-L)
- OpenAlex
- W2944676190
- Cited by
- 370
- References
- 30
- FWCI
- 13.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.