The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Open accessAbstract
Additive manufacturing (AM) is of tremendous interest given its ability to realize complex, non-traditional geometries in engineered structural materials. However, microstructures generated from AM processes can be equally, if not more, complex than their conventionally processed counterparts. While some microstructural features observed in AM may also occur in more traditional solidification processes, the introduction of spatially and temporally mobile heat sources can result in significant microstructural heterogeneity. While grain size and shape in metal AM structures are understood to be highly dependent on both local and global temperature profiles, the exact form of this relation is not well understood. Here, an idealized molten zone and temperature-dependent grain boundary mobility are implemented in a kinetic Monte Carlo model to predict three-dimensional grain structure in additively manufactured metals. To demonstrate the flexibility of the model, synthetic microstructures are generated under conditions mimicking relatively diverse experimental results present in the literature. Simulated microstructures are then qualitatively and quantitatively compared to their experimental complements and are shown to be in good agreement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fiji: an open-source platform for biological-image analysis
Schindelin, J., Arganda-Carreras, I., Frise, E., Kaynig, V., Longair, M., Pietzsch, T., Preibisch, S., Rueden, C., Saalfeld, S., Schmid, B., et al. (2012) · Nature Methods · doi:10.1038/nmeth.2019 · Cited by 66,890 · cited 1×
“The experimental EBSD images were first segmented into grains using the FIJI image analysis package [44].”
MethodMetal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984 · cited 1×
“This drastic variability at the microstructural level is due to the non-uniform local solidification behavior occurring in the process [1,2].”
BackgroundFlemings, M. C. (1974) · Metallurgical transactions · doi:10.1007/bf02643923 · Cited by 3,403
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Carroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
Groeber, M. A., & Jackson, M. A. (2014) · Integrating Materials and Manufacturing Innovation · doi:10.1186/2193-9772-3-5 · Cited by 1,125
Wang, Z., Palmer, T. A., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.019 · Cited by 830
Computational Welding Mechanics
Goldak, J., & Akhlaghi, M. (2005) · Kluwer Academic Publishers eBooks · doi:10.1007/b101137 · Cited by 782
Survey of computed grain boundary properties in face-centered cubic metals: I. Grain boundary energy
Olmsted, D. L., Foiles, S. M., & Holm, E. A. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.04.007 · Cited by 759
Carter, L. N., Martin, C., Withers, P. J., & Attallah, M. M. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.06.172 · Cited by 751
Antonysamy, A. A., Meyer, J., & Prangnell, P. B. (2013) · Materials Characterization · doi:10.1016/j.matchar.2013.07.012 · Cited by 747
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016) · JOM · doi:10.1007/s11837-015-1810-0 · Cited by 630
Correlation between solidification parameters and weld microstructures
David, S. A., & Vitek, J. M. (1989) · International Materials Reviews · doi:10.1179/imr.1989.34.1.213 · Cited by 591
Raghavan, N., Dehoff, R., Pannala, S., Simunovic, S., Kirka, M., Turner, J., Carlson, N., & Babu, S. S. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.063 · Cited by 573
Microstructural and texture development in direct laser fabricated IN718
Parimi, L. L., Ravi, G. A., Clark, D., & Attallah, M. M. (2014) · Materials Characterization · doi:10.1016/j.matchar.2013.12.012 · Cited by 565
Evolution of solidification texture during additive manufacturing
Wei, H. L., Mazumder, J., & DebRoy, T. (2015) · Scientific Reports · doi:10.1038/srep16446 · Cited by 557
Dehoff, R. R., Kirka, M. M., Sames, W. J., Bilheux, H., Tremsin, A. S., Lowe, L. E., & Babu, S. S. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000734 · Cited by 555
Texture control during laser deposition of nickel-based superalloy
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.06.014 · Cited by 471
Modeling of additive manufacturing processes for metals: Challenges and opportunities
Francois, M. M., Sun, A., King, W. E., Henson, N. J., Tourret, D., Bronkhorst, C. A., Carlson, N. N., Newman, C. K., Haut, T., Bakosi, J., et al. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.001 · Cited by 462
Self-citationMultiscale Modeling of Powder Bed–Based Additive Manufacturing
Markl, M., & Körner, C. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032158 · Cited by 401
Olmsted, D. L., Holm, E. A., & Foiles, S. M. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.04.015 · Cited by 392
Gandin, C. A., Desbiolles, J. L., Rappaz, M., & Thevoz, P. (1999) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-999-0226-2 · Cited by 360
Beese, A. M., & Carroll, B. E. (2015) · JOM · doi:10.1007/s11837-015-1759-z · Cited by 343
Origin of grain orientation during solidification of an aluminum alloy
Wei, H., Elmer, J. W., & DebRoy, T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.057 · Cited by 296
Zinoviev, A. V., Zinovieva, O., Ploshikhin, V., Александровна, Р. В., & Ревович, Б. Р. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.125 · Cited by 265
A second report on diagrams of microstructure and hardness for heat-affected zones in welds
Ion, J. C., Easterling, K. E., & Ashby, M. F. (1984) · Acta Metallurgica · doi:10.1016/0001-6160(84)90176-7 · Cited by 242
Rai, A., Markl, M., & Körner, C. (2016) · Computational Materials Science · doi:10.1016/j.commatsci.2016.07.005 · Cited by 222
Three-dimensional modeling of grain structure evolution during welding of an aluminum alloy
Wei, H., Elmer, J. W., & DebRoy, T. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.073 · Cited by 204
Tailoring the grain structure of IN718 during selective electron beam melting
Körner, C., Helmer, H., Bauereiß, A., & Singer, R. F. (2014) · MATEC Web of Conferences · doi:10.1051/matecconf/20141408001 · Cited by 174
High-throughput stochastic tensile performance of additively manufactured stainless steel
Salzbrenner, B. C., Rodelas, J., Madison, J. D., Jared, B. H., Swiler, L. P., Shen, Y., & Boyce, B. L. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.10.023 · Cited by 161
Self-citationPopova, E., Rodgers, T. M., Gong, X., Cecen, A., Madison, J. D., & Kalidindi, S. R. (2017) · Integrating materials and manufacturing innovation · doi:10.1007/s40192-017-0088-1 · Cited by 144
Self-citationTan, W., & Shin, Y. C. (2014) · Computational Materials Science · doi:10.1016/j.commatsci.2014.10.063 · Cited by 132
Martukanitz, R. P., Michaleris, P., Palmer, T. A., DebRoy, T., Liu, Z., Otis, R., Heo, T. W., & Chen, L. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.09.002 · Cited by 123
Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy
Cao, J., Liu, F., Lin, X., Huang, C., Chen, J., & Huang, W. (2012) · Optics & Laser Technology · doi:10.1016/j.optlastec.2012.06.043 · Cited by 119
Heat transfer and fluid flow during electron beam welding of 304L stainless steel alloy
Naresh, R., Palmer, T. A., Elmer, J. W., & DebRoy, T. (2009) · Welding Journal · Cited by 83
Garcia, A., Tikare, V., & Holm, E. A. (2008) · Scripta Materialia · doi:10.1016/j.scriptamat.2008.05.039 · Cited by 47
Self-citation
Cited by
Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900981 · Cited by 614
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Metallurgy, mechanistic models and machine learning in metal printing
DebRoy, T., Mukherjee, T., Wei, H. L., Elmer, J. W., & Milewski, J. O. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00236-1 · Cited by 497
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Metal additive manufacturing: Technology, metallurgy and modelling
Cooke, S., Ahmadi, K., Willerth, S., & Herring, R. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.07.025 · Cited by 378
Metadata
- Authors
- Rodgers, T. M., Madison, J. D., & Tikare, V.
- Venue
- Computational Materials Science
- Publisher
- Elsevier BV
- Published
- 2017-07
- Volume
- 135
- Pages
- 78-89
- ISSN
- 0927-0256 (ISSN-L)
- OpenAlex
- W2606292481
- Cited by
- 369
- References
- 39
- FWCI
- 21.73
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.