Green composites based on polypropylene matrix and hydrophobized spend coffee ground (SCG) powder
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Abstract Green composites were prepared with polypropylene matrix and 20 wt.% spent coffee ground (SCG) powder for uses as a wood plastic composite (WPC). The effects of hydrophobic treatment with palmitoyl chloride on SCG powder is compared with conventional surface treatment based on silanization with (3-glycidyloxypropyl) trimethoxysilane and the use of a maleated copolymer compatibilizer (polypropylene-graft-maleic anhydride, PP-g-MA) in terms of mechanical properties, morphology, thermal properties and water uptake. Composites were previously mixed in a twin-screw co-rotating extruder and subsequently subjected to injection moulding. The comparative effect of the different surface treatments and or compatibilizers on mechanical performance was studied by flexural, impact tests and dynamic mechanical thermal analysis (DMTA-torsion); in addition, the stabilizing effect of SCG was revealed by differential scanning calorimetry (DSC) and thermogravymetric analysis (TGA). As one of the main drawbacks of wood plastic composites and natural fibre reinforced plastics is the moisture gain, water uptake tests were carried out in order to quantify the effectiveness of the hydrophobization process with palmitoyl chloride. Results show a slight increase in flexural modulus for composites with both untreated and treated/compatibilized SCG powder (20 wt.%). As expected, thermal stability is improved as indicated by an increase of more than 8% in the onset degradation temperature by DSC if compared to unfilled polypropylene. Fracture analysis by scanning electron microscopy (SEM) shows better particle dispersion for PP-SCG composites with hydrophobized SCG with palmitoyl chloride treatment; in addition a remarkable decrease in water uptake is observed for composites with hydrophobized SCG.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sustainable management of coffee industry by-products and value addition—a review
Murthy, P. S., & Madhava Naidu, M. (2012) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2012.06.005 · Cited by 1,055 · cited 1×
“Nowadays most of the SCG wastes are poured into the environment or burned in order to remove them, being these techniques highly disrespectful with the environment [13].”
BackgroundJoseph, P. V., Rabello, M. S., Mattoso, L. H. C., Joseph, K., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00080-5 · Cited by 515 · cited 1×
“Moisture gain in NFRPs and WPCs is a critical issue as the water uptake leads to dimensional instability [4-6].”
Background
Cited by
Environmental performance of bio-based and biodegradable plastics: the road ahead
Lambert, S., & Wagner, M. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00149e · Cited by 838
Spent coffee grounds: A review on current utilization
McNutt, J., & He, Q. (. (2019) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2018.11.054 · Cited by 316
Valorization of spent coffee grounds: A review
Kovalcik, A., Obruca, S., & Marova, I. (2018) · Food and Bioproducts Processing · doi:10.1016/j.fbp.2018.05.002 · Cited by 277
Kourmentza, C., Economou, C. N., Tsafrakidou, P., & Kornaros, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.088 · Cited by 152
Arrieta, M. P., López, J., López, D., Kenny, J. M., & Peponi, L. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.02.027 · Cited by 106
Trongchuen, K., Ounkaew, A., Kasemsiri, P., Hiziroglu, S., Mongkolthanaruk, W., Wannasutta, R., Pongsa, U., & Chindaprasirt, P. (2018) · Starch - Stärke · doi:10.1002/star.201700238 · Cited by 48
Metadata
- Authors
- García-García, D., Carbonell, A., Samper, M. D., García-Sanoguera, D., & Balart, R.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2015-09
- Volume
- 78
- Pages
- 256-265
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2013796253
- Cited by
- 190
- References
- 2
- FWCI
- 7.61
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.