Additive layer manufacturing of poly (ether ether ketone) via FDM

Metal Additive Manufacturing: A Review

Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984

Additive Manufacturing Technologies

Gibson, I., Rosen, D. W., & Stucker, B. E. (2009) · Springer eBooks · doi:10.1007/978-1-4419-1120-9 · Cited by 4,440

Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing

Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299

A review on stereolithography and its applications in biomedical engineering

Melchels, F. P. W., Feijén, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,473

Anisotropic material properties of fused deposition modeling ABS

Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,396

Additive manufacturing: technology, applications and research needs

Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,188

3D printing with polymers: Challenges among expanding options and opportunities

Stansbury, J. W., & Idacavage, M. J. (2015) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,758

Recent advances in 3D printing of biomaterials

Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734

Parametric appraisal of mechanical property of fused deposition modelling processed parts

Sood, A. K., Ohdar, R., & Mahapatra, S. S. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,380

A review on 3D micro-additive manufacturing technologies

Vaezi, M., Seitz, H., & Yang, S. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,344

Yielding and post-yielding behavior of FDM parts under compression stress at different strain rates

Scipioni, S. I., & Lambiase, F. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11985-y · Cited by 9

Computational assessment of effect of porosity on thermal conductivity of 3D-printed PEEK/carbon-fiber composite

Alghamdi, A. A. (2023) · Journal of Composite Materials · doi:10.1177/00219983231194249 · Cited by 9

The effect of 3D printing fluorene-containing poly (aryl ether ketone)/poly (ether ketone) blends on interlayer strength

Yang, Y., Jiang, B., Shang, Y., Xu, Q., He, J., Li, X., & Zhang, H. (2023) · Polymer · doi:10.1016/j.polymer.2023.126497 · Cited by 9

Theoretical and Computational Analysis on the Melt Flow Behavior of Polylactic Acid in Material Extrusion Additive Manufacturing under Vibration Field

Jiang, S., Chen, P., Zhan, Y. C., & Zhao, C. (2020) · Applied Sciences · doi:10.3390/app10113801 · Cited by 9

Tensile properties and corrosion resistance of PCL ‐based 3D printed composites

Chen, B., Wang, Y., Tuo, X., Gong, Y., & Guo, J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.50253 · Cited by 9

Systematic study of FFF materials for digitalizing chemical reactors with 3D printing: superior performance of carbon-filled polyamide

Korabelnikova, V. A., Gordeev, E. G., & Ananikov, V. P. (2023) · Reaction Chemistry & Engineering · doi:10.1039/d2re00395c · Cited by 9

Obtaining excellent mechanical properties with additively manufactured short fiber reinforced polyether-ether-ketone thermoplastics through simultaneous vacuum and infrared heating

Gümrük, R., Vatandaş, B. B., & Uşun, A. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104491 · Cited by 8

Experimental investigation on the effect of the Fused Deposition Modeling parameters on the processing of Polyether Ether Ketone

Billè, E., Franulović, M., Gambitta, A., Liović, D., Rondinella, A., Scalzo, F., Sortino, M., Totis, G., & Vaglio, E. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.04.295 · Cited by 8

Dry sliding wear behaviour of 3D printed Polyetheretherketone with varying layer thickness

Prajapati, S. K., & Gnanamoorthy, R. (2025) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2025.05.022 · Cited by 8

Investigating the Impact of Inclusions on the Behavior of 3D-Printed Composite Sandwich Beams

Elhassan, A., Ahmed, W. K., & Zaneldin, E. K. (2022) · Buildings · doi:10.3390/buildings12091448 · Cited by 8

Research of composition porosity based on 3d-printed frames and impregnated with epoxy resin

Lopatina, Y. A., & Филиппова, А. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/963/1/012031 · Cited by 8

Enhanced performance of FDM-3D printed carbon fiber/PEEK composites via high-load, low-porosity filament preparation

Zhang, Q., Sun, C., Qiao, J., & Lin, J. (2025) · Composites Communications · doi:10.1016/j.coco.2025.102652 · Cited by 7

Evaluation of material extrusion and laser-assisted in situ consolidation integrated additive manufacturing for multi-material components

Niu, C., Luan, C., Shen, H., Ding, Z., Dong, N., Ji, Y., Xu, G., & Fu, J. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.07.049 · Cited by 7

Effect of input variables on the mechanical properties of additively manufactured PEEK thermoplastics

Shekar, A. C., Hadj-Djilani, A., Zitoune, R., Toubal, L., & Hof, L. A. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.09.101 · Cited by 7

Fabrication, testing, and analysis of sandwich structure with composite skin and additive manufactured core

Lee, D., Kwon, H.-J., Yang, S., & Kim, M.-S. (2021) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684421995883 · Cited by 7

Preliminary test on the effect of direct annealing on additive manufactured PEEK bending properties

Morfini, L., Guerra, M. G., Lavecchia, F., Spina, R., & Galantucci, L. M. (2023) · Procedia CIRP · doi:10.1016/j.procir.2023.06.121 · Cited by 7

Investigation and Feasibility of Printing Polyoxymethylene Semi-crystalline Polymer Parts with Fused Filament Fabrication 3D Printer and Evaluation of Mechanical Properties of the Printed Samples

Akhoundi, B., & Modanloo, V. (2023) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-023-08619-5 · Cited by 7

Influence of part orientation on the quality and performance of 3D printed components: a comprehensive review

Singh, D., Singh, M. P., & Shrivastava, Y. (2025) · Progress in Additive Manufacturing · doi:10.1007/s40964-025-01256-5 · Cited by 7

Enhancing additive manufacturing quality and productivity using machine learning: a study on laser powder bed fusion of AISI 316L-2.5%Cu

Moradi, A., Tajalli, S., Taghian, M., Behjat, A., Saboori, A., & Iuliano, L. (2025) · Progress in Additive Manufacturing · doi:10.1007/s40964-025-01452-3 · Cited by 6

Extrusion‐Based Additive Manufacturing of Cranial Implants Using High‐Performance Polymers: A Comparative Study on Mechanical Performance and Dimensional Accuracy

Fuckner, J., Mueller, K. M. A., Bruyas, A., & Mela, P. (2024) · Advanced Engineering Materials · doi:10.1002/adem.202401520 · Cited by 6

Fused Filament Fabrication of Slow-Crystallizing Polyaryletherketones: Crystallinity and Mechanical Properties Linked to Processing and Post-Treatment Parameters

Doyle, L., Pérez-Ferrero, X. M., Molleja, J. G., Losada, R., Romero, P., & Fernandéz‐Blázquez, J. P. (2024) · Polymers · doi:10.3390/polym16233354 · Cited by 9

Simulation study on internal structure design and surface mineralization modification of 3D printed PEEK

Chen, B., Tuo, X., Gong, Y., & Zhou, Y. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.136209 · Cited by 6

Effect of alternate fill pattern on mechanical properties of FDM printed PC-PBT alloy

Singhal, P., Sujithra, R., & Saritha, D. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.04.470 · Cited by 6

Effect of Zn-nanoHA concentration on the mechanical performance and bioactivity of 3D printed PEEK composites for craniofacial implants

Manzoor, F., Golbang, A., McIlhagger, A., Harkin‐Jones, E., Crawford, D., & Mancuso, E. (2022) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1080/14658011.2022.2108986 · Cited by 6

Study of tribotechnical characteristics of 3D printed abs plastic samples

Slavkina, V. E., & Lopatina, Y. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/963/1/012032 · Cited by 6

Bonding between high-performance polymer processed by Fused Filament Fabrication and PEEK/carbon fiber laminate

Caprais, I., Joyot, P., Duc, E., & Deseur, S. (2021) · ESAFORM 2021 · doi:10.25518/esaform21.2335 · Cited by 6

Low Melt Viscosity High‐Performance Polyether Ether Ketone—Carbon Fibers Composites for Additive Manufacturing: An Insight on Microstructure, Crystallinity, and Correlation With Thermo‐Mechanical Properties

Caschera, D., Campi, G., de, T., Bragaglia, M., Paleari, L., Sibillano, T., Rinaldi, M., & Nanni, F. M. C. (2025) · Polymer Composites · doi:10.1002/pc.70247 · Cited by 5

PEEK/PEI Polymer Blends for Fused Filament Fabrication: Processing, Properties, and Printability

McCrickard, C., Boyd, A., Rodzeń, K., Archer, E., Manzoor, F., & Ullah, J. (2025) · Polymers · doi:10.3390/polym18010113 · Cited by 7

Research progress on bio-inspired composite structures based on ceramic 3D printing: a review

Kong, D., Wu, H., Zhang, Q., Lv, D., Han, Y., Zhang, Z., & Ren, L. (2026) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ae3a5b · Cited by 5

Computational thermal analysis of large-format additive manufacturing for CF/PAEK with integrated localized heating

Shen, J., Wang, K., Davies, R., Evans, K. E., & Ghita, O. R. (2026) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2026.01.090 · Cited by 5

Mechanical and microstructural investigation of three-dimensionally printed PEEK polymer

Karunanithi, C., & Natarajan, S. (2024) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062241264950 · Cited by 5

Cellulose fiber (palm fiber and teff straw) reinforced 3D printed composites with enhanced fracture resistance

Bukate, B. B., Lemu, H. G., Femi, O. E., Tolcha, M. A., Joseph, A., & Tiwary, C. S. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.112944 · Cited by 5

Study of the tensile strength of a polymer composite material based on ABS-plastic and impregnated in epoxy resin with different types of hardener

Филиппова, А., Lopatina, Y. A., & Sviridov, A. S. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1990/1/012015 · Cited by 5

3D-Printed high performance PEEK/CF-PEEK polymer composites—An investigation on microstructural characteristics and mechanical performance

Santhosh, M. S. B., Chandramohan, P., & Raghu, R. (2024) · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · doi:10.1177/09544089241284469 · Cited by 4

Enhancing interlayer mechanical properties of poly (ether ether ketone) fused deposition modeling parts by parameter optimization and post-annealing

Xu, J., He, Y., Shi, S., Hao, S., Tian, J., Chen, Y., Dai, S., & Yang, C. (2025) · Progress in Additive Manufacturing · doi:10.1007/s40964-025-01395-9 · Cited by 4

Optimizing PEEK impact strength through multi-objective FDM 3D printing

Padhy, C. P., Simhambhatla, S., & Bhattacharjee, D. (2023) · JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES · doi:10.15282/jmes.17.4.2023.6.0770 · Cited by 4

Impact Strength of 3D Printed Polyether-ether-ketone (PEEK)

Gong, H., Xing, X., & Nel, J. H. (2019) · doi:10.26153/tsw/17309 · Cited by 4

The Foundational Principles of FDM

Srivastava, R., & Thakur, A. (2025) · IGI Global eBooks · doi:10.4018/979-8-3373-0533-2.ch012 · Cited by 3

Experimental investigation of fused filament fabrication process parameters on the mechanical performance of carbon fibre reinforced PEEK composites

Vasu, V. K., Nayak, P. H., Kumar, R. S., Praveen Kumar, M., V, Pawar, M. D., N, D. K. B., Vijayavardhana, C., L, V. D., & Prasad, C. D. (2026) · Canadian Metallurgical Quarterly · doi:10.1080/00084433.2026.2631254 · Cited by 3

Room Temperature Photocurable PEEK Polymer Formulations for High-Performance 3D Printing Applications

Pal, S., Gaikwad, Y., & Asha, S. K. (2024) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.4c00275 · Cited by 3

A systematic review of the process parameters, mechanical characteristics and applications of polyether ether ketone (PEEK) and its composites by additive manufacturing

VijayKashimatt, M. G. (2024) · Engineering Research Express · doi:10.1088/2631-8695/ad6af7 · Cited by 3

Mechanical and surface characterisation of additively manufactured polyetheretherketone for the tribo test

Prajapati, S. K., & Gnanamoorthy, R. (2024) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2024-0188 · Cited by 3

Investigating the influence of infill pattern and layer height on the mechanical and bonding behavior of additively manufactured PEEK for dental applications

Türksayar, A. A. D., Petersmann, S., Spintzyk, S., & Kurt, İ. B. Y. (2025) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2025.03.010 · Cited by 3

Determination of Cyclic Load Limits for Plasma‐Sprayed Copper Tracks on Material Extrusion‐Based Printed Surfaces

Stiller, T., Hausberger, A., Berer, M., Schwan, A. M., Hinterer, A., Spalt, S., Pinter, G., & Lackner, J. M. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200567 · Cited by 3

Investigation on the forming process of polylactic acid in material extrusion additive manufacturing technique

Jiang, S., Yun, C., Ying, H., Chen, J., Zhao, C., & Yao, H. (2024) · International Journal of Material Forming · doi:10.1007/s12289-024-01828-w · Cited by 3

Analysis of thermal behavior in 3D printing of continuous fiber reinforced polymer composites

Li, S. (2024) · Materials research proceedings · doi:10.21741/9781644903131-283 · Cited by 3

Investigating the tensile properties and crystallinity of 3D-printed poly (ether ether ketone)/poly (ether imide) [PEEK/PEI] blend in the Z-direction by fused filament fabrication

Magri, A. E. (2024) · Progress in Additive Manufacturing · doi:10.1007/s40964-024-00754-2 · Cited by 4

Effect of infill orientation on the wear behaviour of 3D printed polyetheretherketone

Prajapati, S. K., & Gnanamoorthy, R. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-10390-4 · Cited by 3

Complex architecture fabrication with photosensitive PEEK-based ink via vat photopolymerization and two-step thermal treatment

Zhang, Z., Song, K., Zhuang, R., Jianxian, H., Yang, Y., Pan, Y., Mino, T., Hirose, K., & Umezu, S. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.104840 · Cited by 3

On the Influence of Manufacturing Strategy of 3D-Printed Polymer Substrates on Cold Spray Deposition

Viscusi, A., Astarita, A., Borrelli, D., Caraviello, A., Carrino, L., Gatta, R. D., Lopresto, V., Papa, I., Perna, A. S., Sansone, R., et al. (2021) · ESAFORM 2021 · doi:10.25518/esaform21.3003 · Cited by 3

Significantly improved interlayer strength in 3D printed polyetheretherketone components by regulating the crystallization behavior

Qin, X., Zhang, H., Li, J., Liu, Z., Zhou, M., Xue, D., Bai, G., Zhou, A., Yang, X., & Sui, G. (2025) · Progress in Additive Manufacturing · doi:10.1007/s40964-025-01454-1 · Cited by 2

Investigating the effect of printing parameters on the porosity and tensile behavior of 3D-printed PEEK in Z-direction

Magri, A. E., Bouchkara, Z., Vaudreuil, S., & Vanaei, H. R. (2026) · Progress in Additive Manufacturing · doi:10.1007/s40964-026-01718-4 · Cited by 2

Fused deposition modeling (FDM) of polyether-ether-ketone (PEEK) dental implants: A systematic review of the effect of printing parameters on mechanical behaviour and surface quality

El-Amier, N., Tahboub, K., Jafarpour, D., Bhoopathi, P., Zimmermann, E. A., & Souza, R. (2026) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2026.107575 · Cited by 2

Hybrid energy storage system design for mobile multi-material fused deposition modeling

Chen, Y., Liu, Y., Chen, J., Wang, Z., & Tang, B. (2020) · AIP Advances · doi:10.1063/5.0014097 · Cited by 2

A Feature-Specific Local Cooling System to Control Tensile Strength and Dimensional Accuracy in Fused Filament Fabrication

Mueller, K. M. A., Pammer, S. T., Leonhardt, S., & Mela, P. (2021) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2021.0098 · Cited by 2

Evaluation of the influence of process parameters on crystallinity and tensile strength of 3D printed PEEK parts

Triminì, V., Varetti, S., Percoco, G., Corvaglia, S. G., Gallo, N., & Scavo, I. (2023) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062231198784 · Cited by 2

Radiopaque filaments for fused filament fabrication (FFF) 3D printing

Zekraoui, S., Lescot, T., Taemeh, M. A., & Fortin, M. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.104914 · Cited by 2

Experimental and Theoretical Analysis on the Dynamic Characteristics of Fused Filament Fabrication Plates

Jiang, S., Zhan, M., Sun, M., Dai, W., & Zhao, C. (2019) · Shock and Vibration · doi:10.1155/2019/1219435 · Cited by 2

Printing process and application progress of 3D printing continuous fiber reinforced composites

Cao, F., ZhiYong, Z. E. N. G., HUANG, J., Zhang, F., Qian, K., & Li, W. (2023) · Scientia Sinica Technologica · doi:10.1360/sst-2023-0077 · Cited by 2

An investigation on thermal behavior and stress-warpage of poly-ether-ether-ketone parts by fused deposition modeling

Zhang, H., Chen, C., Wang, J., Yang, Y., Jia, L., Yuan, X., Hui, J., Lv, J., & Yan, Z. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-17423-z · Cited by 3

Dynamic response of 3D printed functionally graded sandwich foams

Bonthu, D., Bharath, H. S., Bekinal, S. I., Jeyaraj, P., & Doddamani, M. R. (2023) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2023-0016 · Cited by 1

Analysis of the Mechanical and Physical Behaviors of 3D-Printed PEEK Structures under Different Parameters

Murat, F., Yavuz, O., Temel, M. S., Korkmaz, İ. H., & Kaymaz, İ. (2024) · International Journal of Pioneering Technology and Engineering · doi:10.56158/jpte.2024.62.3.01 · Cited by 1

In vitro assessment of corrosion, antibacterial properties, and degradation behavior of zirconia-coated polyetheretherketone (PEEK)

Karunanithi, C., Natarajan, S., Manivasagam, G., & Sathiyanarayanan, J. (2024) · Journal of Bioactive and Compatible Polymers · doi:10.1177/08839115241287214 · Cited by 1

Laser-selective curing for enhancement of interlayer bonding of 3D-printing polydimethylsiloxane-based structures

Cheng, Q., Wang, F., Wang, W., Yang, W., Ren, Z., Xi, W., Feng, C., Zhang, F., & Lin, X. (2025) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2025.09.064 · Cited by 1

3D-Printed Continuous Fiber Composites: An Overview of Materials, Systems and Processes

Ricardo, M. D. B., Anderson, J., Thiago, D. F. S., Luiz, C. P., Ilaria, C., Francesca, N., & Antonio, C. A. J. (2025) · Advanced Materials & Sustainable Manufacturing · doi:10.70322/amsm.2025.10018 · Cited by 1

3D printing Lift-Off? The use of additive manufacturing in spacecraft components

Dalmarco, G., Mendes, R. A. D. L. R., Simões, A. C., & Avila, A. M. S. (2026) · Acta Astronautica · doi:10.1016/j.actaastro.2026.03.057 · Cited by 1

3D Print Continuation Process Parameter Setting to Optimize the Tensile Strength

Herianto, H., Setyawan, M. R., & Mastrisiswadi, H. (2022) · International Journal on Advanced Science Engineering and Information Technology · doi:10.18517/ijaseit.12.1.13973 · Cited by 1

Void Content Measurement of the 3D Printed PEEK Materials by X-Ray Micro Computed Tomography

Emolaga, C. S., de Yro, P. A. N., Arañez, S. A. C., Reyes, J. P., Visaya, B. A., Basilia, B. A., Monsada, A. M., & Advíncula, R. C. (2022) · Diffusion Foundations and Materials Applications · doi:10.4028/p-c00t77 · Cited by 1

Machine Learning Regressors in Forecasting Mechanical Properties in Advanced Manufacturing Processes

Barrionuevo, G. O., Ramos-Grez, J. A., & Montero, F. J. (2024) · Lecture notes in networks and systems · doi:10.1007/978-3-031-52255-0_20 · Cited by 1

3D Printable Antimicrobial Polymer Blend

Daniels, M., Rautenbach, M., du Plessis, A., & Pfukwa, R. (2024) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400071 · Cited by 1

On Wear Properties of 3D Printed Hybrid Blended PLA Composite

Kumar, S. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00042-0 · Cited by 1

Comprehensive Analysis of Fused Deposition Modeling Process Conditions for Enhancing Mechanical Properties and Surface Quality of 3d-Printed Poly-Ether-Ether-KetonePreprint

Zhao, K., Gao, J., Li, W., Wang, J., Wang, X., & Sha, C. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4612027 · Cited by 1

Characterization of Polymers and Polymer‐Based Composites for Material Extrusion Additive Manufacturing

León, A. D. S. D., & Maturi, M. (2025) · doi:10.1002/9783527844807.ch3 · Cited by 1

Polymers

Fink, J. K. (2018) · doi:10.1002/9781119555308.ch2

Mathematical Approach for the Determination of the Surface Roughness in the Milling of Poly-Ether-Ether-Cethone (PEEK)

(2022) · International Journal of Emerging Trends in Engineering Research · doi:10.30534/ijeter/2022/091022022

The Influence of Synthesis Modes on the Structure and Properties of Polyethylene Samples Produced by FDM Printing

Кондрашов, С. В., Пыхтин, А. А., Larionov, S. A., Sapego, Y. A., & Melnikov, A. A. (2022) · Polymer Science Series D · doi:10.1134/s1995421222040414

Influence of Process Parameters of 3D Printed PEEK on Crystallinity and Mechanical Performances

Triminì, V., Varetti, S., Percoco, G., Corvaglia, S. G., Gallo, N., & Scavo, I. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-28547-9_21

Introduction

Doddamani, M. R., Bharath, H. S., Prabhakar, P., & Gururaja, S. (2023) · Materials horizons · doi:10.1007/978-981-99-1730-3_1

3D printing of glass microballoon–based syntactic foams

Bharath, H. S., Patil, B., & Doddamani, M. R. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95189-0.00004-4

Comparison of Friction Performance of Polyether ether ketone Fabricated Using Different Methods Under Dry Sliding ConditionsPreprint

Prajapati, S. K., & Gnanamoorthy, R. (2024) · Research Square · doi:10.21203/rs.3.rs-4011448/v1

Additive Manufacturing of Polymer Materials for Industrial Applications

Kalman, J. (2024) · doi:10.32920/25412572

Additive Manufacturing of Polymer Materials for Industrial Applications

Kalman, J. J. W. (2024) · doi:10.32920/25412572.v1

Material Extrusion-Based Additive Manufacturing of Polyetheretherketone Cranial Implants: Geometrical Accuracy (Pre-Post-Sterilization) and Mechanical Performance in a Surgical Configuration vs. Human Cranial BonePreprint

Smith, J. A. M., Petersmann, S., Dominkovic, D., Ali, K. M., Schäfer, U., & Arbeiter, F. J. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4798418

Analysis of Performance of Additively Manufactured Reinforced Ablatives

Kafi, A. A., Michalski, Q., Pahuja, R., Wu, H., Koo, J. H., & Bateman, S. A. (2024) · Journal of Spacecraft and Rockets · doi:10.2514/1.a35905

Determining Impact Strength of Extrusion-Based 3D-Printed PEEK Using Multi-criteria Decision-Making (MCDM)

Padhy, C. P., Suryakumar, S., Bhattacharjee, D., & Prabhu, T. R. (2024) · Springer Proceedings in Materials · doi:10.1007/978-981-97-5963-7_3

Minimization of Degradation and Optimization of the Printing Parameters for Enhancing Sustainability of Additive Manufacturing

Edeleva, M., Zafeiris, K., Fiório, R., D’hooge, D., Charitidis, C. A., & Cardon, L. (2025) · Springer handbooks · doi:10.1007/978-3-031-66209-6_32

Biomedical applications of polyether ether ketone and its composites

Jayan, J. S., Pradeep, P., Venu, G., & Saigayathri, M. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-24061-4.00018-7

Preparation and applications of polyether ether ketone based composites

Gupta, V., Kulkarni, D. M., Thiruselvam, N. I., Chaudhari, V. V., & Suraj, S. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-24061-4.00001-1

The material extrusion additive manufacturing process with ultrasonic-vibration aided machining

Jiang, S., Yun, C., Chen, J., Ying, H., Zhao, C., & yao, H. (2026) · International Journal of Material Forming · doi:10.1007/s12289-025-01941-4

In situ shear behavior of Co-extruded 3D-Printed carbon fiber reinforced thermoplastic composites with polyamide matrix

Dong, L., Tang, X., Zhang, H., & Lou, X. (2026) · Journal of Reinforced Plastics and Composites · doi:10.1177/07316844261439270

Bibliometric analysis of 3D print in education

Mastrisiswadi, H., Wibowo, A. W. A., Ismianti, Husaini, R., Kasih, P. H., & Rahmawati, K. (2026) · AIP conference proceedings · doi:10.1063/5.0317169

Additive manufacturing of the high-performance thermoplastic : experimental study and numerical simulation of the Fused Filament Fabrication

Balani, S. B. (2019) · doi:10.70675/fb46d3d2z3b3cz4ecezaddfzf312949bb7d1 · Cited by 7

Synthesis and properties of polyetheretherketone-based copolymers with controlled degree of crystallinity

Zhansitov, A. A., Тимуровна, Ш. К., Kurdanova, Z. I., Shokumova, M. U., Orazaev, A. K., Simonov-Yemelyanov, I. D., & Khashirova, S. Y. (2026) · Plasticheskie massy · doi:10.35164/0554-2901-2026-02-13-16

MXene-engineered aramid fiber interfaces toward enhanced tribological interface stability in PEEK compositesPreprint

Yan, S., Wang, L., Wang, B., Yu, L., Zhang, J., Cao, X., Huang, L., Zhou, A., & Liu, X. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6993116

Microwave-Induced Interlayer Bonding of Extruded Polyether Ether Ketone via Calcium–Zinc Ferrite and Carbon Nanotube Synergy

Wu, W., Zhou, M., Chen, J., Huang, Z., Chen, R., Feng, J., Yu, H., Ding, S., Du, C., & Shan, B. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c01739

A review of FDM methods, microstructure, and structure–property relationships in polymer composites

Bharti, R., Mursaleen, M., & Dey, A. (2026) · Advanced Composite Materials · doi:10.1080/09243046.2026.2713975

Future trends and innovations in fused filament fabrication 3D printing

Hasanzadeh, R. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-45223-9.00011-0

Advances in material extrusion additive manufacturing of ultra-performance polymers and composites for space applications

Rashed, K., Olaiya, N. G., Kafi, A. A., Simons, R., Peracchi, S., Ameli, A., & Bateman, S. A. (2026) · Progress in Additive Manufacturing · doi:10.1007/s40964-026-01984-2

Orientation and fiber content effects on the mechanical and microstructural properties of additively manufactured CFR-PEEK composites for cranio-maxillofacial implants

Oteiza, J. Z., Seiler, D., de Wild, M., Thieringer, F. M., & Sharma, N. (2026) · Materials Today Communications · doi:10.1016/j.mtcomm.2026.116403

Surface Integrity and Mechanical Performance of Vertically Printed FDM-PLA After Laser Polishing: Coupled Effects of Scan Orientation and Hatch Distance

Stolárik, G., Vandžura, R., Radchenko, S., Hlaváček, P., & Geľatko, M. (2026) · Polymers · doi:10.3390/polym18202559

A comprehensive analysis on the processing-structure-property relationships of FDM-based 3-D printed polyetheretherketone (PEEK) structures

Sikder, P., Challa, B. T., & Gummadi, S. K. (2022) · Materialia · doi:10.1016/j.mtla.2022.101427 · Cited by 118

Comprehensive Analysis of Fused Deposition Modeling Process Conditions for Enhancing Mechanical Properties and Surface Quality of 3d-Printed Poly-Ether-Ether-KetonePreprint

Zhao, K., Gao, J., Li, W., Wang, J., Wang, X., & Sha, C. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4612027 · Cited by 1

Influence of Process Parameters of 3D Printed PEEK on Crystallinity and Mechanical Performances

Triminì, V., Varetti, S., Percoco, G., Corvaglia, S. G., Gallo, N., & Scavo, I. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-28547-9_21

Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone

Wang, P., Pan, A., Xia, L., Cao, Y., Zhang, H., & Wu, W. (2022) · High Performance Polymers · doi:10.1177/09540083211067388 · Cited by 33

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 462