Additive layer manufacturing of poly (ether ether ketone) via FDM

Metal Additive Manufacturing: A Review

Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984

Additive Manufacturing Technologies

Gibson, I., Rosen, D. W., & Stucker, B. E. (2009) · Springer eBooks · doi:10.1007/978-1-4419-1120-9 · Cited by 4,440

Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing

Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299

A review on stereolithography and its applications in biomedical engineering

Melchels, F. P. W., Feijén, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,473

Anisotropic material properties of fused deposition modeling ABS

Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,396

Additive manufacturing: technology, applications and research needs

Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,188

3D printing with polymers: Challenges among expanding options and opportunities

Stansbury, J. W., & Idacavage, M. J. (2015) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,758

Recent advances in 3D printing of biomaterials

Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734

Parametric appraisal of mechanical property of fused deposition modelling processed parts

Sood, A. K., Ohdar, R., & Mahapatra, S. S. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,380

A review on 3D micro-additive manufacturing technologies

Vaezi, M., Seitz, H., & Yang, S. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,344

FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments

Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,095

Recent Progress on Polymer Materials for Additive Manufacturing

Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 776

A critical review on the fused deposition modeling of thermoplastic polymer composites

Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 719

Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges

Chen, L., Liang, S., Liu, Y., & Zhang, L. (2021) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2021.100648 · Cited by 629

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Wang, P., Zou, B., Ding, S., Li, L., & Huang, C. (2020) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.05.040 · Cited by 376

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications

Han, X., Yang, D., Yang, C., Spintzyk, S., Scheideler, L., Li, P., Li, D., Geis‐Gerstorfer, J., & Rupp, F. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8020240 · Cited by 365

Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing

Arif, M. F., Alhashmi, H., Varadarajan, K. M., Koo, J. H., Hart, A. J., & Kumar, S. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107625 · Cited by 245

Fused filament fabrication of peek: A review of process-structure-property relationships

Zanjanijam, A. R., Major, I., Lyons, J. G., Lafont, U., & Devine, D. M. (2020) · Polymers · doi:10.3390/polym12081665 · Cited by 240

Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG’s Mechanical Properties to FDM Printing Process Parameters

Algarni, M., & Ghazali, S. M. (2021) · Crystals · doi:10.3390/cryst11080995 · Cited by 237

Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers

Das, A., Chatham, C. A., Fallon, J. J., Zawaski, C. E., Gilmer, E. L., Williams, C. B., & Bortner, M. J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101218 · Cited by 242

3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective

Tian, X., TODOROKI, A., Liu, T., Wu, L., Hou, Z., Ueda, M., Hirano, Y., Matsuzaki, R., Mizukami, K., Iizuka, K., et al. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100016 · Cited by 235

Semi-crystalline feedstock for filament-based 3D printing of polymers

Vaes, D., & Puyvelde, P. V. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101411 · Cited by 235

3D printing of polyether-ether-ketone for biomedical applications

Singh, S., Prakash, C., & Ramakrishna, S. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.035 · Cited by 230

Polymer Recycling in Additive Manufacturing: an Opportunity for the Circular Economy

Shanmugam, V., Das, O., Neisiany, R. E., Babu, K., Singh, S., Hedenqvist, M. S., Berto, F., & Ramakrishna, S. (2020) · Materials Circular Economy · doi:10.1007/s42824-020-00012-0 · Cited by 227

Additive manufacturing of bone scaffolds

Yang, Y., Wang, G., Liang, H., Gao, C., Peng, S., Shen, L., & Shuai, C. (2018) · International Journal of Bioprinting · doi:10.18063/ijb.v5i1.148 · Cited by 229

Developments of PEEK (Polyetheretherketone) as a biomedical material: A focused review

Verma, S., Sharma, N., Kango, S., & Sharma, S. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110295 · Cited by 211

Development of short basalt fiber reinforced polylactide composites and their feasible evaluation for 3D printing applications

Sang, L., Han, S., Li, Z., Yang, X., & Hou, W. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.085 · Cited by 188

Effect of 3D printing process parameters on surface and mechanical properties of FFF-printed PEEK

Pulipaka, A., Gide, K. M., Beheshti, A., & Bagheri, Z. S. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.11.057 · Cited by 188

Materials for space exploration and settlement

Ghidini, T. (2018) · Nature Materials · doi:10.1038/s41563-018-0184-4 · Cited by 178

Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments

Harris, M., Potgieter, J., Archer, R. H., & Arif, K. M. (2019) · Materials · doi:10.3390/ma12101664 · Cited by 178

The thermal properties of FDM printed polymeric materials: A review

Shanmugam, V., Babu, K., Kannan, G., Mensah, R. A., Samantaray, S. K., & Das, O. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.110902 · Cited by 180

Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling

Ceretti, D. V. A., Edeleva, M., Cardon, L., & D’hooge, D. (2023) · Molecules · doi:10.3390/molecules28052344 · Cited by 169

An Experimental Study of Nozzle Temperature and Heat Treatment (Annealing) Effects on Mechanical Properties of High‐Temperature Polylactic Acid in Fused Deposition Modeling

Akhoundi, B., Nabipour, M., Hajami, F., & Shakoori, D. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25353 · Cited by 156

Additive Manufacturing of Polyether Ether Ketone (PEEK) for Space Applications: A Nanosat Polymeric Structure

Rinaldi, M., Cecchini, F., Pigliaru, L., Ghidini, T., Lumaca, F., & Nanni, F. M. C. (2020) · Polymers · doi:10.3390/polym13010011 · Cited by 155

Flexural Properties and Fracture Behavior of CF/PEEK in Orthogonal Building Orientation by FDM: Microstructure and Mechanism

Li, Q., Zhao, W. G., Li, Y., Yang, W., & Wang, G. (2019) · Polymers · doi:10.3390/polym11040656 · Cited by 156

Novel 3D porous biocomposite scaffolds fabricated by fused deposition modeling and gas foaming combined technology

Song, P., Zhou, C., Fan, H., Zhang, B., Pei, X., Fan, Y., Jiang, Q. Y., Bao, R., Yang, Q., Dong, Z., et al. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.06.029 · Cited by 147

Mechanical characterization of biocompatible PEEK by FDM

Zhao, Y., Zhao, K., Li, Y., & Chen, F. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.063 · Cited by 146

3D printed conductive thermoplastic polyurethane/carbon nanotube composites for capacitive and piezoresistive sensing in soft pneumatic actuators

Hohimer, C. J., Petrossian, G., Ameli, A., Mo, C., & Pötschke, P. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101281 · Cited by 147

The Effects of Combined Infill Patterns on Mechanical Properties in FDM Process

Dezaki, M. L., & Ariffin, M. K. A. M. (2020) · Polymers · doi:10.3390/polym12122792 · Cited by 143

3D printed PEEK/HA composites for bone tissue engineering applications: Effect of material formulation on mechanical performance and bioactive potential

Manzoor, F., Golbang, A., Jindal, S. K., Dixon, D., McIlhagger, A., Harkin‐Jones, E., Crawford, D., & Mancuso, E. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104601 · Cited by 142

Interlayer bonding strength of 3D printed PEEK specimens

Liaw, C., Tolbert, J. W., Chow, L. W., & Güvendiren, M. (2021) · Soft Matter · doi:10.1039/d1sm00417d · Cited by 128

Recent advances in additive manufacturing of engineering thermoplastics: challenges and opportunities

Picard, M. C., Mohanty, A. K., & Misra, M. (2020) · RSC Advances · doi:10.1039/d0ra04857g · Cited by 127

Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages?

Başgül, C., Yu, T., MacDonald, D. W., Siskey, R. L., Marcolongo, M. S., & Kurtz, S. M. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103455 · Cited by 123

Improvement of the layer-layer adhesion in FFF 3D printed PEEK/carbon fibre composites

Rodzeń, K., Harkin‐Jones, E., Wegrzyn, M., Sharma, P. K., & Zhigunov, A. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106532 · Cited by 122

Advances in hybrid fibers reinforced polymer-based composites prepared by FDM: A review on mechanical properties and prospects

Li, S., Cheng, P., Ahzi, S., Peng, Y. L., Wang, K., Francisco Chinesta, C., & Correia, J. P. M. (2023) · Composites Communications · doi:10.1016/j.coco.2023.101592 · Cited by 119

An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts

Magri, A. E., Vanaei, S., & Vaudreuil, S. (2021) · High Performance Polymers · doi:10.1177/09540083211009961 · Cited by 106

An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants

Han, X., Sharma, N., Xu, Z., Scheideler, L., Geis‐Gerstorfer, J., Rupp, F., Thieringer, F. M., & Spintzyk, S. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8060771 · Cited by 105

Impact of nanosilica on the friction and wear of a PEEK/CF composite coating manufactured by fused deposition modeling (FDM)

Lin, L., Ecke, N., Huang, M., Pei, X., & Schlarb, A. K. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107428 · Cited by 103

Comparative evaluation of supervised machine learning algorithms in the prediction of the relative density of 316L stainless steel fabricated by selective laser melting

Barrionuevo, G., Ramos-Grez, J. A., Walczak, M., & Betancourt, C. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06596-4 · Cited by 97

Recent Advances on High‐Performance Polyaryletherketone Materials for Additive Manufacturing

Chen, P., Wang, H., Su, J. D., Tian, Y., Wen, S., Su, B., Cao, Y., Chen, B., Zhou, K., Yan, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202200750 · Cited by 101

Additive manufacturing of polyetheretherketone and its composites: A review

Francis, J. N., Banerjee, I., Chugh, A., & Singh, J. (2022) · Polymer Composites · doi:10.1002/pc.26961 · Cited by 99

Mechanical properties of thermoplastic parts produced by fused deposition modeling:a review

Bakır, A. A., Atik, R., & Özerinç, S. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2020-0061 · Cited by 88

Tensile and Bending Strength Improvements in PEEK Parts Using Fused Deposition Modelling 3D Printing Considering Multi-Factor Coupling

Li, Y., & Lou, Y. (2020) · Polymers · doi:10.3390/polym12112497 · Cited by 86

Thin-film electronics on active substrates: review of materials, technologies and applications

Catania, F., Oliveira, H. D. S., Lugoda, P., Cantarella, G., & Munzenrieder, N. S. (2022) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ac6af4 · Cited by 88

A review on the potential of polylactic acid based thermoplastic elastomer as filament material for fused deposition modelling

Musa, L., Nitiyah, K. K., Rahim, S. Z. A., Rasidi, M. S. M., Rennie, A., Rahman, R., Kanani, A. Y., & Azmi, A. A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.08.057 · Cited by 91

Flexure Behaviors of ABS-Based Composites Containing Carbon and Kevlar Fibers by Material Extrusion 3D Printing

Wang, K., Li, S., Rao, Y., Wu, Y., Peng, Y. L., Yao, S., Zhang, H., & Ahzi, S. (2019) · Polymers · doi:10.3390/polym11111878 · Cited by 83

Advances in fused deposition modeling of discontinuous fiber/polymer composites

Hu, C. Q., & Qin, Q. (2020) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2020.100867 · Cited by 80

Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuous-Fiber-Reinforced PEEK Composites

Wang, P., & Zou, B. (2022) · Coatings · doi:10.3390/coatings12060827 · Cited by 82

From materials to devices using fused deposition modeling: A state-of-art review

Zhang, P., Wang, Z., Li, J., Li, X., & Cheng, L. (2020) · Nanotechnology Reviews · doi:10.1515/ntrev-2020-0101 · Cited by 78

Effects of printing parameters on the tensile behavior of 3D ‐printed acrylonitrile styrene acrylate ( ASA ) material in Z direction

Magri, A. E., Ouassil, S., & Vaudreuil, S. (2022) · Polymer Engineering and Science · doi:10.1002/pen.25891 · Cited by 80

Additive Manufacturing in Off-Site Construction: Review and Future Directions

Pasco, J., Lei, Z., & Aranas, C. (2022) · Buildings · doi:10.3390/buildings12010053 · Cited by 76

Comparison of various 3D printed and milled PAEK materials: Effect of printing direction and artificial aging on Martens parameters

Prechtel, A., Reymus, M., Edelhoff, D., Hickel, R., & Stawarczyk, B. (2019) · Dental Materials · doi:10.1016/j.dental.2019.11.017 · Cited by 71

Simultaneous reinforcement of both rigidity and energy absorption of polyamide-based composites with hybrid continuous fibers by 3D printing

Wang, K., Li, S., Wu, Y., Rao, Y., & Peng, Y. L. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.113854 · Cited by 67

3D printing of high performance polymer-bonded PEEK-NdFeB magnetic composite materials

Pigliaru, L., Rinaldi, M., Ciccacci, L., Norman, A. F., Rohr, T., Ghidini, T., & Nanni, F. M. C. (2020) · Functional Composite Materials · doi:10.1186/s42252-020-00006-w · Cited by 65

Effect of temperature history during additive manufacturing on crystalline morphology of PEEK

Lee, A., Wynn, M., Quigley, L., Salviato, M., & Zobeiry, N. (2022) · Advances in Industrial and Manufacturing Engineering · doi:10.1016/j.aime.2022.100085 · Cited by 70

Neutron Shielding Performance of 3D-Printed Boron Carbide PEEK Composites

Wu, Y., Cao, Y., Wu, Y., & Li, D. (2020) · Materials · doi:10.3390/ma13102314 · Cited by 63

Slow and fast crystallising poly aryl ether ketones (PAEKs) in 3D printing: Crystallisation kinetics, morphology, and mechanical properties

Yi, N., Davies, R., Chaplin, A., McCutchion, P., & Ghita, O. R. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101843 · Cited by 62

The technology of continuous fibre-reinforced polymers: a review on extrusion additive manufacturing methods

Pandelidi, C., Bateman, S. A., Piegert, S., Hoehner, R., Kelbassa, I., & Brandt, M. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06837-6 · Cited by 61

Poly (Ether-Ether-Ketone) for Biomedical Applications: From Enhancing Bioactivity to Reinforced-Bioactive Composites—An Overview

Senra, M. R., Marques, M. D. F. V., & Monteiro, S. N. (2023) · Polymers · doi:10.3390/polym15020373 · Cited by 61

The effect of in-plane layer orientation on mixed-mode I-II fracture behavior of 3D-printed poly-carbonate specimens

Bahrami, B., Ayatollahi, M. R., Sedighi, I., Pérez, M. A., & García‐Granada, A. (2020) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2020.107018 · Cited by 61

Box-Behnken modeling to quantify the impact of control parameters on the energy and tensile efficiency of PEEK in MEX 3D-printing

Vidakis, N., Petousis, M., Mountakis, N., & Karapidakis, E. S. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e18363 · Cited by 60

Modeling the fracture behavior of 3D-printed PLA as a laminate composite: Influence of printing parameters on failure and mechanical properties

Bragaglia, M., Cecchini, F., Paleari, L., Ferrara, M., Rinaldi, M., & Nanni, F. M. C. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.117379 · Cited by 59

Controlling Crystallization: A Key Factor During 3d Printing with the Advanced Semi-Crystalline Polymeric Materials Peek, Pekk 6002 and Pekk 7002

Rodzeń, K., McIlhagger, A., Strachota, B., Strachota, A., Meenan, B. J., & Boyd, A. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200668 · Cited by 58

A comprehensive review of lunar-based manufacturing and construction

Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57

3D and 4D printing: A review of virgin polymers used in fused deposition modeling

Makki, T., Vattathurvalappil, S. H., Theravalappil, R., Nazir, A., Alhajeri, A., Azeem, M. A., Mahdi, E., Ummer, A. C., & Ali, U. (2024) · Composites Part C Open Access · doi:10.1016/j.jcomc.2024.100472 · Cited by 57

Preparation and characterization of poly (ether ether ketone)/poly (ether imide)[PEEK/PEI] blends for fused filament fabrication

El Magri, A., El Mabrouk, K., & Vaudreuil, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06172-x · Cited by 55

Mechanical performance and bioactivation of 3D-printed PEEK for high-performance implant manufacture: a review

Rendas, P., Figueiredo, L., Machado, C. M., Mourão, A., Vidal, C., & Soares, B. A. R. (2022) · Progress in Biomaterials · doi:10.1007/s40204-022-00214-6 · Cited by 56

Additive Manufacturing of Polyaryletherketone (PAEK) polymers and their composites

Yap, T., Heathman, N., Phillips, T. B., Beaman, J. J., & Tehrani, M. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.111019 · Cited by 58

3D printing high interfacial bonding polyether ether ketone components via pyrolysis reactions

Li, Q., Zhao, W. G., Niu, B., Wang, Y., Wu, X., Ji, J., Li, Y., Zhao, T., Li, H., & Wang, G. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109333 · Cited by 58

Additive manufacturing: a review on mechanical properties of polyjet and FDM printed parts

Chandramohan, P., Raghu, R., & Dhanraj, P. K. (2021) · Polymer Bulletin · doi:10.1007/s00289-021-03899-0 · Cited by 57

Improvement of tensile and flexural properties of 3D printed PEEK through the increase of interfacial adhesion

Rendas, P., Figueiredo, L., Geraldo, M., Vidal, C., & Soares, B. A. R. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.03.024 · Cited by 55

Production and characterization of PEEK/IF-WS2 nanocomposites for additive manufacturing: Simultaneous improvement in processing characteristics and material properties

Golbang, A., Harkin‐Jones, E., Wegrzyn, M., Campbell, G., Archer, E., & McIlhagger, A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100920 · Cited by 54

Fracture load of 3D printed PEEK inlays compared with milled ones, direct resin composite fillings, and sound teeth

Prechtel, A., Stawarczyk, B., Hickel, R., Edelhoff, D., & Reymus, M. (2020) · Clinical Oral Investigations · doi:10.1007/s00784-020-03216-5 · Cited by 52

High-performance carbon fiber reinforced polyether-ether-ketone composite pellets 3D-Printed via screw-extrusion additive manufacturing

Hu, Z., He, J., Chen, W., Liu, W., Ding, J., He, C., Wang, S., Ning, F., & Li, X. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2023.110362 · Cited by 51

Advancements in Metal Additive Manufacturing: A Comprehensive Review of Material Extrusion with Highly Filled Polymers

Sadaf, M., Bragaglia, M., Perše, L. S., & Nanni, F. M. C. (2024) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp8010014 · Cited by 52

Fused-Filament Fabrication of Short Carbon Fiber-Reinforced Polyamide: Parameter Optimization for Improved Performance under Uniaxial Tensile Loading

Belei, C. A. F., Joeressen, J., & Amancio‐Filho, S. T. (2022) · Polymers · doi:10.3390/polym14071292 · Cited by 52

3D Printing of ABS Barium Ferrite Composites

Hanemann, T., Syperek, D., & Nötzel, D. (2020) · Materials · doi:10.3390/ma13061481 · Cited by 50

Additive manufacturing of polyether ether ketone-based composites for space application: a mini-review

Rinaldi, M., Ferrara, M., Pigliaru, L., Allegranza, C., & Nanni, F. M. C. (2021) · CEAS Space Journal · doi:10.1007/s12567-021-00401-4 · Cited by 49

Effect of fiber content on mechanical properties of carbon fiber-reinforced polyether-ether-ketone composites prepared using screw extrusion-based online mixing 3D printing

Lu, S., Zhang, B., Niu, J., Yang, C., Sun, C., Wang, L., & Li, D. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.103976 · Cited by 50

Mechanical and morphological characterization of spherical cell porous structures manufactured using FDM process

Ali, N. B., Khlif, M., Hammami, D., & Bradaï, C. (2019) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2019.106527 · Cited by 50

Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects

Gordeev, E. G., & Ananikov, V. P. (2020) · Russian Chemical Reviews · doi:10.1070/rcr4980 · Cited by 48

Mechanical behavior of 3D printed syntactic foam composites

Bharath, H. S., Sawardekar, A., Waddar, S., Pitchaimani, J., & Doddamani, M. R. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.112832 · Cited by 47

Slowing crystallization to enhance interlayer strength of 3D printed poly (ether ether ketone) parts by molecular design

Shang, Y., Xu, Q., Jiang, B., Yang, Y., Liu, X. H., Jiang, Z., Yu, C. Y., Li, X., & Zhang, H. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103104 · Cited by 47

Enhanced interlayer strength in 3D printed poly (ether ether ketone) parts

Xu, Q., Xu, W., Yang, Y., Yin, X., Zhou, C., Han, J., Li, X., Shang, Y., & Zhang, H. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102852 · Cited by 44

The Surface Characteristics, Microstructure and Mechanical Properties of PEEK Printed by Fused Deposition Modeling with Different Raster Angles

Gao, S., Liu, R., Xin, H., Liang, H., Wang, Y., & Jia, J. (2021) · Polymers · doi:10.3390/polym14010077 · Cited by 43

Effect of Infill Parameters on the Compressive Strength of 3D-Printed Nylon-Based Material

Liu, J., Naeem, M. A., Kouzbary, M. A., Kouzbary, H. A., Shasmin, H. N., Arifin, N., Razak, N. A. A., & Osman, N. A. A. (2023) · Polymers · doi:10.3390/polym15020255 · Cited by 43

Research on the Fused Deposition Modeling of Polyether Ether Ketone

Gao, R., Xie, J., Yang, J., Zhuo, C., Fu, J., & Zhao, P. (2021) · Polymers · doi:10.3390/polym13142344 · Cited by 44

Label-Free Physical Techniques and Methodologies for Proteins Detection in Microfluidic Biosensor Structures

Коноплев, Г., Agafonova, D. S., Bakhchova, L., Mukhin, N. V., Kurachkina, M., Schmidt, M.-P., Верлов, Н. А., Sidorov, A. I., Oseev, A., Stepanova, O. S., et al. (2022) · Biomedicines · doi:10.3390/biomedicines10020207 · Cited by 43

Fused filament fabrication of nylon 6/66 copolymer: parametric study comparing full factorial and Taguchi design of experiments

Rashed, K., Kafi, A. A., Simons, R., & Bateman, S. A. (2022) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2021-0139 · Cited by 43

Mechanical Properties of Fused Deposition Modeling of Polyetheretherketone (PEEK) and Interest for Dental Restorations: A Systematic Review

Moby, V., Dupagne, L., Fouquet, V., Attal, J., François, P., & Dursun, E. (2022) · Materials · doi:10.3390/ma15196801 · Cited by 39

A machine learning approach for the prediction of melting efficiency in wire arc additive manufacturing

Barrionuevo, G., Sequeira-Almeida, P. M., Ríos, S., Ramos-Grez, J. A., & Williams, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08966-y · Cited by 41

Laser powder bed fusion of poly-ether-ether-ketone/bioactive glass composites: Processability, mechanical properties, and bioactivity

Wang, H., Chen, P., Shu, Z., Chen, A., Su, J. D., Wu, H., Chen, Z., Yang, L., Yan, C., & Shi, Y. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109805 · Cited by 41

Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks

Sadaf, M., Cano, S., González-Gutiérrez, J., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály, L., Kitzmantel, M., & Nanni, F. M. C. (2022) · Polymers · doi:10.3390/polym14224962 · Cited by 40

Fabricating 3D printable BIIR/PP TPV via masterbatch and interfacial compatibilization

Hou, J., Zhong, M. Q., Pan, X., Chen, L., Wu, X. W., Kong, Z., Yuan, Y., Yan, S., Zhang, J., & Duan, Y. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108220 · Cited by 40

Effects of fused filament fabrication process parameters on tensile properties of polyether ketone ketone (PEKK)

Rashed, K., Kafi, A., Simons, R., & Bateman, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10134-1 · Cited by 39

Fused filament fabrication of polyetheretherketone/multiwalled carbon nanotube nanocomposites: the effect of thermally conductive nanometric filler on the printability and related properties

Rinaldi, M., Ghidini, T., & Nanni, F. M. C. (2021) · Polymer International · doi:10.1002/pi.6206 · Cited by 40

Optimization of material extrusion additive manufacturing process parameters for polyether ketone ketone (PEKK)

Rashed, K., Kafi, A., Simons, R., & Bateman, S. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11167-w · Cited by 38

Investigation of Dimensional Integrity and Surface Quality of Different Thin-Walled Geometric Parts Produced via Fused Deposition Modeling 3D Printing

Taşdemir, V. (2021) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-021-05809-x · Cited by 38

Contributions of interfaces on the mechanical behavior of 3D printed continuous fiber reinforced composites

Li, S., Wang, K., Zhu, W., Peng, Y. L., Ahzi, S., & Francisco Chinesta, C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127842 · Cited by 38

Essential work of fracture studies of 3D Printed PEEK (Poly-ether-ether-ketone) polymer

Sharma, G., Vuppuluri, A., & Suresh, K. (2022) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2022.108656 · Cited by 38

A comprehensive analysis on the processing-structure-property relationships of FDM-based 3-D printed polyetheretherketone (PEEK) structures

Sikder, P., Challa, B. T., & Gummadi, S. K. (2022) · Materialia · doi:10.1016/j.mtla.2022.101427 · Cited by 118

Comprehensive Analysis of Fused Deposition Modeling Process Conditions for Enhancing Mechanical Properties and Surface Quality of 3d-Printed Poly-Ether-Ether-KetonePreprint

Zhao, K., Gao, J., Li, W., Wang, J., Wang, X., & Sha, C. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4612027 · Cited by 1

Influence of Process Parameters of 3D Printed PEEK on Crystallinity and Mechanical Performances

Triminì, V., Varetti, S., Percoco, G., Corvaglia, S. G., Gallo, N., & Scavo, I. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-28547-9_21

Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone

Wang, P., Pan, A., Xia, L., Cao, Y., Zhang, H., & Wu, W. (2022) · High Performance Polymers · doi:10.1177/09540083211067388 · Cited by 33

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 462