Rheological properties of cellulose nanocrystals engineered polylactic acid nanocomposites
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract Ecofriendly materials such as polylactic acid (PLA) and cellulose nanocrystals (CNCs) are widely sought as potential substitute for petrochemical-based plastics. Uniform dispersion of cellulose nanocrystals in polymer matrices has inhibited their wide-spread application. In this study the influence of masterbatch preparation techniques on molecular structure, melt strength, rheological and dynamic mechanical properties of nanocomposite were systematically analyzed. Film casting and spin-coating methods were used to prepare masterbatches. Nanocomposites were obtained by masterbatch dilution via melt compounding followed by injection molding process. The higher molecular weight and lower molecular number were observed in spin-coated samples in comparison with film cast nanocomposites. The spin-coated nanocomposites exhibited higher storage modulus than film cast samples in the glassy state. However, tan δ curves exhibited higher peak value in spin-coated nanocomposites, which were in good agreement with higher dispersity index of spin-coated samples. The complex viscosity of PLA and nanocomposites exhibited non-Newtonian behavior at a low shear rate, followed by shear thinning phenomenon. The spin-coated nanocomposites demonstrated higher complex viscosity than film cast samples, which was attributed to higher molecular weight in spin-coated samples. The shear-thinning tendency in spin-coated samples was higher than film cast nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ray, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
Effect of natural weather on the structure and properties of polylactide/Cloisite 30B nanocomposites
Zaidi, L., Kaci, M., Bruzaud, S., Bourmaud, A., & Grohens, Y. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.05.014 · Cited by 150
Hassan, E., Wei, Y., null, H. J., & Muhuo, Y. (2013) · Journal of Fiber Bioengineering and Informatics · doi:10.3993/jfbi03201308 · Cited by 124
Cited by
Current applications of poly(lactic acid) composites in tissue engineering and drug delivery
Liu, S., Qin, S., He, M., Zhou, D., Qin, Q., & Wang, H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108238 · Cited by 533
Cellulose nanocrystal based composites: A review
Shojaeiarani, J., Bajwa, D. S., & Chanda, S. (2021) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2021.100164 · Cited by 269
Self-citationTrivedi, A. K., & Gupta, M. K. (2024) · Scientific Reports · doi:10.1038/s41598-024-71619-5 · Cited by 49
“This behavior illustrates that the addition of CNC by 1 wt% probably formed the interconnected network structure with the matrix that inhibited the mobility of the PLA chains 53 .”
BackgroundYan, C., Jiang, Y.-P., Hou, D.-F., Yang, W., & Yang, M.-B. (2020) · Polymer · doi:10.1016/j.polymer.2019.122021 · Cited by 23
Metadata
- Authors
- Shojaeiarani, J., Bajwa, D. S., Stark, N. M., & Bajwa, S. G.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 161
- Pages
- 483-489
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2906951821
- Cited by
- 76
- References
- 3
- FWCI
- 2.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rheological properties of cellulose nanocrystals engineered polylactic acid nanocomposites. https://app.cochat.ai/papers/10.1016/j.compositesb.2018.12.128
- The paper
- Shojaeiarani, J., Bajwa, D. S., Stark, N. M., & Bajwa, S. G. (2019). Rheological properties of cellulose nanocrystals engineered polylactic acid nanocomposites. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2018.12.128
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.