Ductility improvements of PLA-based binary and ternary blends with controlled morphology using PBAT, PBSA, and nanoclay
The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
In this study, binary and ternary immiscible blends of polylactide (PLA) with poly[(butylene adipate)-co-terephthalate] (PBAT) and poly[(butylene succinate)-co-adipate] (PBSA) were prepared through an injection-molding (IM) process. Blend nanocomposites of PLA/PBAT/nanoclay were also prepared using a twin-screw extruder (TSE) followed by IM. An amorphous PLA (A-PLA), a semicrystalline PLA (SC-PLA), and their mixture were used as the matrix to investigate the matrix crystallization effect on blend morphology evolution and ductility enhancements. The results showed that in PLA/PBAT blends with 75/25 wt ratio, the increase in PLA crystallization capability caused finer and more homogenous blend morphology and hence the ductility increased significantly from around 5% to ~205%. In contrast, the ductility enhancements of co-continuous PLA/PBAT blends with 50/50 wt ratio became more profound when the PLA matrix was more amorphous. In PLA/PBSA blends, however, no ductility improvement was observed as the vitrification of PLA could hinder the PBSA crystallization which resulted in a non-uniform blend structure. In ternary blends, a matrix-core shell morphology was obtained and led to the improvements of the flexural strength and modulus. The use of nanoclay also significantly promoted the ductility of PLA/PBAT blends with 75/25 wt ratio, specifically in blends with A-PLA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Self-citationKhoshkava, V., & Kamal, M. R. (2013) · Biomacromolecules · doi:10.1021/bm400784j · Cited by 235
(Co)polymers of L‐lactide, 2. Mechanical properties
Grijpma, D. W., & Pennings, A. J. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950516 · Cited by 191
Cited by
Aversa, C., Barletta, M., Cappiello, G., & Gisario, A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111304 · Cited by 213
Sooraj, V., Bhagavatula, S. G. K., & Kannan, M. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57087 · Cited by 16
Li, H., Zhang, X., Wang, J., Xing, Q., Li, R., & Dong, X. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.56490 · Cited by 7
Metadata
- Authors
- Nofar, M., Salehiyan, R., Ciftci, U., Jalali, A., & Durmuş, A.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 182
- Pages
- 107661
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2989781778
- Cited by
- 188
- References
- 12
- FWCI
- 7.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ductility improvements of PLA-based binary and ternary blends with controlled morphology using PBAT, PBSA, and nanoclay. https://app.cochat.ai/papers/10.1016/j.compositesb.2019.107661
- The paper
- Nofar, M., Salehiyan, R., Ciftci, U., Jalali, A., & Durmuş, A. (2020). Ductility improvements of PLA-based binary and ternary blends with controlled morphology using PBAT, PBSA, and nanoclay. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2019.107661
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.