Crystallinity studies of PEKK and carbon fibre/PEKK composites: A review

Kinetics of Phase Change. I General Theory

Avrami, M. (1939) · The Journal of Chemical Physics · doi:10.1063/1.1750380 · Cited by 11,417

Kinetics of non-isothermal crystallization

Ozawa, T. (1971) · Polymer · doi:10.1016/0032-3861(71)90041-3 · Cited by 2,414

The morphology of poly(aryl-ether-ether-ketone)

Blundell, D. J., & Osborn, B. N. (1983) · Polymer · doi:10.1016/0032-3861(83)90144-1 · Cited by 1,064

Crystallization behaviour of poly(ether-ether-ketone)

Cebe, P., & Hong, S.-D. (1986) · Polymer · doi:10.1016/0032-3861(86)90006-6 · Cited by 715

Crystallization of bulk polymers with chain folding: theory of growth of lamellar spherulites

Hoffman, J., & Lauritzen, J. I. (1961) · Journal of Research of the National Bureau of Standards Section A Physics and Chemistry · doi:10.6028/jres.065a.035 · Cited by 708

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662

Polyetheretherketone (PEEK) for medical applications

Panayotov, I. V., Orti, V., Cuisinier, F., & Yachouh, J. (2016) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-016-5731-4 · Cited by 608

Non-isothermal crystallization of polymers

Lorenzo, M. L. D., & Silvestre, C. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(99)00019-2 · Cited by 579

Some aspects of nonisothermal crystallization of polymers. II. Consideration of the isokinetic condition

Nakamura, K., Katayama, K., & Amano, T. (1973) · Journal of Applied Polymer Science · doi:10.1002/app.1973.070170404 · Cited by 449

Glass transition and melting behavior of poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) (PEEK)

Cheng, S. Z. D., Cao, M. Y., & Wunderlich, B. (1986) · Macromolecules · doi:10.1021/ma00161a015 · Cited by 442

Process modelling of In-situ consolidated thermoplastic composite by automated fibre placement – A review

Donough, M. J., Shafaq, S., John, N. A. S., Phillips, A. W., & Prusty, B. G. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107179 · Cited by 124

Description of Poly(aryl-ether-ketone) Materials (PAEKs), Polyetheretherketone (PEEK) and Polyetherketoneketone (PEKK) for Application as a Dental Material: A Materials Science Review

Zol, S. M., Alauddin, M. S., Said, Z., Ghazali, M. I. M., Lee, H.-E., Farid, D. A. M., Zahari, N. A. H., Al-Khadim, A. H. A., & Aziz, A. H. A. (2023) · Polymers · doi:10.3390/polym15092170 · Cited by 114

Crystallisation behaviour and morphological studies of PEKK and carbon fibre/PEKK composites

Pérez-Martín, H., Mackenzie, P., Baidak, A., Brádaigh, C. M. Ó., & Ray, D. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.106992 · Cited by 101

Evaluating the influence of service conditions on the out-of-plane and in-plane loading performance and damage behavior of unidirectional CF/PEKK composites for aerospace applications

Yıldırım, C., Ulus, H., Şaş, H. S., & Yıldız, M. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112637 · Cited by 100

Recent Advances on High‐Performance Polyaryletherketone Materials for Additive Manufacturing

Chen, P., Wang, H., Su, J. D., Tian, Y., Wen, S., Su, B., Cao, Y., Chen, B., Zhou, K., Yan, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202200750 · Cited by 101

An investigation of the influence of matrix properties and fibre–matrix interface behaviour on the mechanical performance of carbon fibre-reinforced PEKK and PEEK composites

Ramaswamy, K., Modi, V., Rao, P. S., Martin, P. P., McCarthy, C. T., & O’Higgins, R. M. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107359 · Cited by 94

In situ Consolidation of Carbon Fiber PAEK via Laser-Assisted Automated Fiber Placement

Heathman, N., Koirala, P., Yap, T., Emami, A., & Tehrani, M. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110405 · Cited by 83

The effect of cooling rates on crystallization and low-velocity impact behaviour of carbon fibre reinforced poly(aryl ether ketone) composites

Zhang, J., Liu, G., An, P., Yu, K., Huang, J. Y., Gu, Y., Cao, R., Cao, R., Liu, H., Chen, C., et al. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110569 · Cited by 71

Review on recycling of carbon fibre reinforced thermoplastics with a focus on polyetheretherketone

Teltschik, J. X., Matter, J., Woebbeking, S., Jahn, K., Adasme, Y. B., Paepegem, W. V., Drechsler, K., & Tallawi, M. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108236 · Cited by 73

Effect of atmospheric plasma treatment on Mode-I and Mode-II fracture toughness properties of adhesively bonded carbon fiber/PEKK composite joints

Yıldırım, C., Ulus, H., Beylergi̇l, B., Al‐Nadhari, A., Topal, S., & Yıldız, M. (2023) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2023.109463 · Cited by 68

Detecting, characterising and assessing PEEK’s and CF-PEEK’s thermal degradation in rapid high-temperature processing

Gaitanelis, D. G., Worrall, C. M., & Kazilas, M. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110096 · Cited by 63

Effect of voids and crystallinity on the interlaminar shear strength of in-situ manufactured CF/PEEK laminates using repass treatment

Wu, D., Miao, Q., Dai, Z., Niu, F., & Ma, G. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109448 · Cited by 62

Ultrasonic welding of short carbon fiber reinforced PEEK with spherical surface anvils

Yang, Y., Li, Y., Liu, Z., Li, Y., Ao, S., & Luo, Z. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109599 · Cited by 60

Consolidation of continuous-carbon-fiber-reinforced PAEK composites: a review

Arquier, R., Iliopoulos, I., Régnier, G., & Miquelard‐Garnier, G. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104036 · Cited by 60

Controlling Crystallization: A Key Factor During 3d Printing with the Advanced Semi-Crystalline Polymeric Materials Peek, Pekk 6002 and Pekk 7002

Rodzeń, K., McIlhagger, A., Strachota, B., Strachota, A., Meenan, B. J., & Boyd, A. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200668 · Cited by 58

A comprehensive review of lunar-based manufacturing and construction

Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57

Additive Manufacturing of Polyaryletherketone (PAEK) polymers and their composites

Yap, T., Heathman, N., Phillips, T. B., Beaman, J. J., & Tehrani, M. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.111019 · Cited by 58

Characterizing damage evolution of CF/PEKK composites under tensile loading through multi-instrument structural health monitoring techniques

Yıldırım, C., Tabrizi, I. E., Al‐Nadhari, A., Topal, S., Beylergi̇l, B., & Yıldız, M. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107817 · Cited by 47

Effect of printing parameters on tensile, thermal and structural properties of 3D ‐printed poly (ether ketone ketone) PEKK material using fused deposition modeling

Magri, A. E., Vaudreuil, S., ayad, A. B., Hakimi, A. E., Otmani, R. E., & Amegouz, D. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54078 · Cited by 44

Comparison and analysis of measurements for crystallinity of PEEK and CF / PEEK composites

Lu, C., Xu, C., Lü, X., Ji, W., Li, S., Ma, J., & Ba, S. (2024) · Polymer Composites · doi:10.1002/pc.29418 · Cited by 43

Strain sensing of structural composites by integrated piezoresistive CNT yarn sensors

Zarzoso, M., Mikhalchan, A., Mocerino, D., Romero, P., Losada, R., Vilatela, J. J., & González, C. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111752 · Cited by 41

Characterization and analysis of the interlaminar behavior of thermoplastic composites considering fiber bridging and R-curve effects

Tijs, B. H. A. H., Abdel-Monsef, S., Renart, J., Turón, A., & Bisagni, C. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107101 · Cited by 40

Influence of deposition rates on the mode I fracture toughness of in-situ consolidated thermoplastic composites

Shafaq, S., Donough, M. J., Farnsworth, A. L., Phillips, A. W., John, N. A. S., & Prusty, B. G. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110474 · Cited by 41

High-strength carbon fiber-reinforced polyether-ether-ketone composites with longer fiber retention length manufactured via screw extrusion-based 3D printing

Lu, S., Zhang, B., Niu, J., Yang, C., Sun, C., Wang, L., & Li, D. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104200 · Cited by 37

A review of 3D printing continuous carbon fiber reinforced thermoplastic polymers: Materials, processes, performance enhancement, and failure analysis

Zhang, Y., Zheng, W., Wang, Y., Ma, K., Feng, X., Ji, Q., Guo, W., & Lu, B. (2025) · Polymer Composites · doi:10.1002/pc.29895 · Cited by 38

Ultra- and high-performance polymers for material extrusion additive manufacturing: Recent advancements, challenges, and optimization perspectives

Vidakis, N., Petousis, M., Spyridaki, M., Mountakis, N., Dimitriou, E., & Michailidis, N. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101086 · Cited by 39

Sulfur-driven reactive processing of multiscale graphene/carbon fiber- polyether ether ketone (PEEK) composites with tailored crystallinity and enhanced mechanical performance

de Castro, E. M., Bozorgmehrian, F., Carrola, M., Koerner, H., Samouei, H., & Asadi, A. A. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112180 · Cited by 36

Crystallinity of neat and carbon fiber-reinforced polyamide-6 processed at different cooling rates

Simaafrookhteh, S., Thillo, T. V., Lomov, S. V., & Ivens, J. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108520 · Cited by 35

A multiscale viscoelastic constitutive model of unidirectional carbon fiber reinforced PEEK over a wide temperature range

Li, Z., Lei, M., Kou, Q., Ma, X., Wen, L., Xiao, J., & Hou, X. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.117258 · Cited by 33

The effect of laser assisted tape placement processing conditions on microstructural evolution, residual stress and interlaminar shear strength of carbon fibre/PEEK laminates

Ma, H., Bandaru, A. K., & Weaver, P. M. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111293 · Cited by 33

Taguchi optimization of 3D printed short carbon fiber polyetherketoneketone (CFR PEKK)

Rabinowitz, A., DeSantis, P. M., Basgul, C., Spece, H., & Kurtz, S. M. (2023) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2023.105981 · Cited by 33

Thermoplastic Extrusion Additive Manufacturing of High-Performance Carbon Fiber PEEK Lattices

Santiago, C. C., Yelamanchi, B., Peña, J. Á., Lamb, J., Roguski, K., Turzyński, F., Faruqui, R., Choo, K., du Plessis, A., Sillani, F., et al. (2021) · Crystals · doi:10.3390/cryst11121453 · Cited by 27

Polymer-based graphene composite molding: a review

Xu, F., Gao, M., Wang, H., Liu, H., Yan, F., Zhao, H., & Yao, Q. (2023) · RSC Advances · doi:10.1039/d2ra07744b · Cited by 28

Designing of carbon fiber-reinforced polymer (CFRP) composites for a second-life in the aeronautic industry: strategies towards a more sustainable future

Borges, C., Chícharo, A., Araújo, A., Silva, J., & Santos, R. M. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1179270 · Cited by 27

Thin-ply thermoplastic composites: From weak to robust transverse performance through microstructural and morphological tuning

Schlothauer, A., Pappas, G. A., & Ermanni, P. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110764 · Cited by 26

Effect of Processing Parameters on Bonding Performance of a Carbon Fiber/Polyetheretherketone Thermoplastic Composite Prepared by Induction Welding

Choi, B., Kang, C.-S., Yoo, M.-H., & Seo, M. (2023) · Materials · doi:10.3390/ma16113954 · Cited by 26

Experimental investigation of the recycling of carbon fiber polyetherketoneketone thermoplastic composite

ZEYREK, B. Y., Aydogan, B., Dilekcan, E., & Öztürk, F. (2023) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057231200011 · Cited by 25

In-situ infrared annealing for laser-assisted automated fiber placement to enhance interlaminar properties without sacrificing laydown efficiency

Wang, X., Chen, C., Hu, S., Chen, Z., Jiang, W., Shen, G., Huang, Z., & Zhou, H. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108214 · Cited by 25

Bio‐based semi‐aromatic waterborne PIEK ‐C sizing agent to construct a robust interface for CF / PEEK composites

Xie, Y., Zhuang, H., Pei, W., Guo, J., Ma, Y., Kong, L., Ao, Y., Liu, L., & Liu, Y. (2024) · Polymer Composites · doi:10.1002/pc.28745 · Cited by 25

Full Characterization of Water Transport Properties in Polyetherketoneketone (PEKK)

Lesimple, G., Iliopoulos, I., Marijon, J.-B., & Bruno Fayolle, C. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c01515 · Cited by 25

A methodology for online characterization of the deconsolidation of fiber-reinforced thermoplastic composite laminates

Amedewovo, L., Lévy, A., Plessix, B. D. P. D., Aubril, J., Arrivé, A., Orgéas, L., & Corre, S. L. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107412 · Cited by 25

Mechanism and behavior of laser irradiation on carbon fiber reinforced polyetheretherketone (CF/PEEK) during the laser-assisted in-situ consolidation additive manufacturing process

Ji, Y., Luan, C., Yao, X., Ding, Z., Niu, C., Dong, N., & Fu, J. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103713 · Cited by 25

Ultrasonic welding of thermoplastic composites: A comparison between polyetheretherketone and low-melt polyaryletherketone as resin in the adherends and energy directors

Brito, C. B. G., Teuwen, J. J. E., Dransfeld, C. A., & Villegas, I. F. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112264 · Cited by 23

Effect of crystallinity and morphology on the mechanical properties of CF/PEKK composites manufactured under compression moulding and automated tape placement

Pérez-Martín, H., Buchalik-Bopp, S., Guettler, B. E., Mackenzie, P., Baidak, A., Brádaigh, C. M. Ó., & Ray, D. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.106442 · Cited by 23

The key technologies for fiber-reinforced polymer composites manufacturing: A state-of-the-art review

Cao, Z., Zhan, L., Ma, B., Li, S., Xie, M., & Guo, J. (2025) · Thin-Walled Structures · doi:10.1016/j.tws.2025.113773 · Cited by 24

CF/PEEK interleaved laminates with PEEK film interleaving manufactured by laser-assisted forming: Microstructure and interlaminar shear strength

Miao, Q., Dai, Z., Ma, G., Niu, F., & Wu, D. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107592 · Cited by 22

Microstructural and micromechanical property characterisation of CF/PEKK composites using nanoindentation

Pérez-Martín, H., Mackenzie, P., Baidak, A., Brádaigh, C. M. Ó., & Ray, D. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112359 · Cited by 22

Geometry and temperature effects on tensile properties and failure behaviors of open-hole and bolted-joint CF/PEKK composites

Li, X., Kumar, S., Hwang, D., Shin, D., Bae, S.-Y., & Kim, Y. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108336 · Cited by 21

Pin-loaded tensile behavior and failure analysis of CF/PEKK composites under extreme temperature

Li, X., Kumar, S., Hwang, D., Shin, D., & Kim, Y. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107823 · Cited by 20

Investigation of color and physicomechanical properties of peek and pekk after storage in a different medium

Kaya, N., Sasany, R., YANIKOĞLU, N., & Tosun, B. (2024) · Scientific Reports · doi:10.1038/s41598-024-54695-5 · Cited by 19

Characterization and analysis of conduction welded thermoplastic composite joints considering the influence of manufacturing

Tijs, B. H. A. H., Turón, A., & Bisagni, C. (2024) · Composite Structures · doi:10.1016/j.compstruct.2024.118505 · Cited by 19

Isothermal crystallization of Poly(ether ether ketone)/carbon fiber composites

Zhang, X., Flanigan, R., de Kort, G. W., Colby, R. H., & Rhoades, A. M. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112386 · Cited by 19

Effect of Carbon Nanotubes on the Mechanical, Crystallization, Electrical and Thermal Conductivity Properties of CNT/CCF/PEKK Composites

Yan, X., Qiao, L., Tan, H., Tan, H., Liu, C., Zhu, K., Liu, C., & Xu, S. (2022) · Materials · doi:10.3390/ma15144950 · Cited by 19

Study on microstructures and mechanical performance of laser transmission welding of poly-ether-ether-ketone (PEEK) and carbon fiber reinforced PEEK (CFR-PEEK)

Liu, Y., Zhang, W., Liu, J., Guan, Y., & Ding, X. (2022) · Journal of Laser Applications · doi:10.2351/7.0000823 · Cited by 19

Structure, Thermal, and Mechanical Behavior of the Polysulfone Solution Impregnated Unidirectional Carbon Fiber Yarns

Chukov, D. I., Tcherdyntsev, V. V., Stepashkin, A. A., & Zadorozhnyy, M. Y. (2023) · Polymers · doi:10.3390/polym15234601 · Cited by 19

Exploring the self-nucleation effect: Transforming crystalline morphology for improved mechanical performance of carbon fiber reinforced polyphenylene sulfide composites

Yi, R., Yu, M., Li, Z., Ji, C., Li, J. S., Zhang, C., Shen, J., Zhou, J., & Zhu, S. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111231 · Cited by 19

Engineering the Crystalline Architecture for Enhanced Properties in Fast-Rate Processing of Poly(ether ether ketone) (PEEK) Nanocomposites

Bidabadi, B. S., de Castro, E. M., Carrola, M., Koirala, P., Tehrani, M., & Asadi, A. A. (2024) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.4c00217 · Cited by 19

Characterization of low-velocity impact response and damage tolerance of thermoplastic/thermoset composite laminates under strong and complex preload

Zhao, Z., Zhou, J., Cai, H., Yang, X., Kou, G., Yan, H., & Yang, Z. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112530 · Cited by 18

Additively manufactured short carbon fiber reinforced polyetheretherketone by coating polyetherimide at the interface using fused filament fabrication

Wang, P., Zhang, H., Cao, Y., Pan, A., & Wu, W. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52438 · Cited by 17

Interfacial performance and build orientation of 3D ‐printed poly(ether‐ketone‐ketone) reinforced by continuous carbon fiber

Fan, T., Zhou, Z., Zhang, H., Zhao, X., Chen, Y., & Wang, H. (2023) · Polymer Composites · doi:10.1002/pc.28000 · Cited by 17

Critical review of interlaminar damage process and failure analysis in fiber-reinforced composite laminates encompassing fiber-bridging phenomenon

pour, M. G., Koloor, S. S. R., Petrů, M., & Ayatollahi, M. R. (2025) · Journal of Composite Materials · doi:10.1177/00219983251313669 · Cited by 16

Crystallization kinetics and equilibrium melting temperature of poly(ether ketone ketone) with high terephthalate content utilizing fast scanning calorimetry

Pomatto, M. E., & Moore, R. B. (2023) · Polymer · doi:10.1016/j.polymer.2023.125810 · Cited by 16

Deconsolidation of carbon fiber-reinforced PEKK laminates: 3D real-time in situ observation with synchrotron X-ray microtomography

Amedewovo, L., Orgéas, L., Plessix, B. D. P. D., Lefevre, N., Lévy, A., & Corre, S. L. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107917 · Cited by 16

Influence of rapid high-temperature processing on the interface of CF/PEEK, a quick and effective method for enhancing the IFSS

Gaitanelis, D. G., Worrall, C. M., & Kazilas, M. (2024) · Composites Science and Technology · doi:10.1016/j.compscitech.2024.110564 · Cited by 16

Inverse effects of cooling rates on the interfacial shear strength of carbon Fiber/PEEK composites with and without presence of transcrystal layers

Yu, K., Zhang, J., Liu, G., Yao, J., Liu, H., & Chen, C. (2024) · Polymer · doi:10.1016/j.polymer.2024.127067 · Cited by 16

Nonuniform crystallization of PEEK in fused filament fabrication and its influence on subsequent mechanical properties

Han, Z., Xiong, Y., Chen, K., Zhao, Z., Xiao, J., Wen, L., Lei, M., & Hou, X. (2025) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2025.106208 · Cited by 15

Raman spectroscopy investigation on amorphous polyetherketoneketone (PEKK)

Delbé, K., & Chabert, F. (2023) · Vibrational Spectroscopy · doi:10.1016/j.vibspec.2023.103620 · Cited by 15

Effects of 3D printing parameters on the flexural properties of semi-crystalline PEKK

Maloney, A., Major, I., Gately, N., & Devine, D. M. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.111152 · Cited by 16

Coupling between thermal ageing/degradation and creep behavior of PEKK and C/PEKK composites above the glass transition temperature

Pedoto, G., Grandidier, J.-C., Gigliotti, M., & Vinet, A. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106717 · Cited by 15

Role of the inter‐ply microstructure in the consolidation quality of high‐performance thermoplastic composites

Arquier, R., Sabatier, H., Iliopoulos, I., Régnier, G., & Miquelard‐Garnier, G. (2023) · Polymer Composites · doi:10.1002/pc.27847 · Cited by 15

Longitudinal failure mechanisms and crack resistance curves of unidirectional thermoplastic composites

Danzi, F., Campos, P. J. S., Arteiro, A., Dalli, D., Furtado, C., Chevalier, J., Tavares, R. P., Lani, F., & Camanho, P. P. (2023) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2023.109147 · Cited by 14

Online characterization of moisture transport in a high-performance carbon fiber-reinforced thermoplastic composite at high temperatures: Identification of diffusion kinetics

Amedewovo, L., Lévy, A., Plessix, B. D. P. D., Orgéas, L., & Corre, S. L. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110629 · Cited by 14

Pre-compositing polyetherketoneketone with short-cut carbon fibers into advanced powder materials toward composites with fully-adhered interfaces

Wang, X., Qu, Y., Bai, J., Xu, F., Ding, B., & Zhang, X. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107930 · Cited by 12

Geometric effects on the fracture toughness and delamination behaviors of carbon fiber/polyetherketoneketone composites with open holes and bolted joints

Lee, K.-M., Kumar, S., Kim, S.-Y., Shin, D., Wu, C., Bae, S.-Y., & Kim, Y. (2025) · Thin-Walled Structures · doi:10.1016/j.tws.2025.113045 · Cited by 13

Exploring Process‐Structure–Property Relationships of PEKK and PEEK in Fused Filament Fabrication

Maloney, A., Major, I., Gately, N., & Devine, D. M. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57347 · Cited by 13

Thermal and Crystallization Properties of the Alternated Tere/Iso PEKK Copolymer: Importance in High-Temperature Laser Sintering

Cherri, A., Iliopoulos, I., Régnier, G., Brulé, B., Lê, G., & Tencé‐Girault, S. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00096 · Cited by 13

Effects of crystallization and thermal degradation behavior on mechanical properties of fiber‐reinforced composites during post‐annealing

Wang, J., Li, X., Wu, T., Chen, Z., Zhao, R., Wang, Z., & Liang, J. (2024) · Polymer Composites · doi:10.1002/pc.29397 · Cited by 12

Three-dimensional printed exoskeletons and orthoses for the upper limb—A systematic review

Silva, J., Gonçalves, S., Silva, H., & Silva, M. (2024) · Prosthetics and Orthotics International · doi:10.1097/pxr.0000000000000318 · Cited by 12

The synergistic effect and origin of strength in carbon fiber reinforced PAEK , PEEK , and PEKK high‐performance thermoplastic composites manufactured by multi‐scale aqueous dispersion coating

Balakumaran, V., Alagirusamy, R., & Kalyanasundaram, D. (2024) · Polymer Composites · doi:10.1002/pc.28682 · Cited by 12

Identifying thermal effects during 3D printing by comparing in-layer infrared pre- and postheating of carbon fiber reinforced polyamide 6

Nesheim, O. S., Eikevåg, S. W., Steinert, M., & Elverum, C. W. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.104705 · Cited by 12

Investigating Interfacial Properties vs Interphase Thickness in a Thermoplastic Composite

Koirala, P., Safdari, M., Mangolini, F., & Tehrani, M. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112444 · Cited by 12

Resin content calculation of carbon fiber/poly (ether ether ketone) by thermogravimetric analysis

Lu, C., Ma, W.-L., Ba, S., & Zhang, D. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107861 · Cited by 12

Isothermal crystallization behavior of poly-ether-ether-ketone/bioactive glass composites and its correlation with scaffold warpage in laser powder bed fusion process

Wang, H., Chen, P., Su, J. D., Chen, Z., Yang, L., Yan, C., & Shi, Y. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103852 · Cited by 11

Comparative study of surface preparation for paint adhesion on CF-PEKK composites: Plasma, Chemical, and Flame treatment

Nandi, A., Biswal, A. K., Nguyen, A. T. T., Nordyke, L., BEHLING, E. R. B. E. R., Foulds, T., Schultz, K. A., & Vashisth, A. (2024) · Applied Surface Science · doi:10.1016/j.apsusc.2024.160533 · Cited by 12

Characterization and modeling of laser transmission welded polyetherketoneketone (PEKK) joints: Influence of process parameters and annealing on weld properties

Matus-Aguirre, M., Cosson, B., Garnier, C., Schmidt, F., Asséko, A. C. A., & Chabert, F. (2024) · Journal of Advanced Joining Processes · doi:10.1016/j.jajp.2024.100252 · Cited by 11

Visualization and investigation of healing mechanism in carbon fiber reinforced Elium ® composites

Khan, T., Ali, M. A., Irfan, M. S., Cantwell, W. J., & Umer, R. (2022) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057221145551 · Cited by 11

Polyetherketoneketone/carbon fiber composites with an amorphous interface prepared by solution impregnation

Zhang, F., Li, B., Jiao, M.-X., Li, Y., Yang, Y., Yang, Y., Yang, Y., & Zhang, X. (2024) · New Carbon Materials · doi:10.1016/s1872-5805(22)60646-2 · Cited by 10

Characterization of the thermomechanical and aging behaviour of PAEK and CF/PAEK composites under long-term high-temperatures

Yang, H., Gao, D.-T., Liu, G., Chen, C.-H., & Yao, J. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.111043 · Cited by 10

Enhanced processability and mechanical properties of poly-ether-ether-ketone/nano-silicon nitride composite scaffolds fabricated by laser powder bed fusion

Wang, H.-Z., Chen, P., Su, J., Li, Y., Tian, Y., Qi, L., Yan, C.-Z., & Shi, Y.-S. (2025) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2024.12.051 · Cited by 10

A multiscale analysis framework for formation and failure of the thermoplastic interface

Lei, M., Ren, S., Wang, S., Zhao, Z., Xiao, J., Wen, L., & Hou, X. (2022) · Mechanics of Materials · doi:10.1016/j.mechmat.2022.104270 · Cited by 10

Crystallization and melting behavior of poly(ether ketone ketone) (PEKK) copolymers synthesized by facile one-step method

Shang, J., Song, P., Li, G.-H., Sun, Q.-M., Li, Y., & Wei, Z.-Y. (2023) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-023-12518-1 · Cited by 8

Crystallization kinetics analysis and modeling of aerospace PAEK materials

Ledesma, R. I., Wohl, C. J., & Grimsley, B. W. (2024) · Polymer Engineering and Science · doi:10.1002/pen.26813 · Cited by 9

Construction of micro–nanostructure for interlayer reinforcement and toughening of carbon fiber/poly(phthalazinone ether sulfone ketone) with coaxially spun polyimide/polyvinylpyrrolidone–carbon nanotube core–shell fibers after stepwise etching

Chen, X., Zhang, Y., Qiao, Y., Zhang, E., Zhao, W., Jian, X., & Liu, C. (2025) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2025.109222 · Cited by 9

Single-step method for the immobilization of hydroxyapatite on 3D-printed porous polyetherketoneketone implants for the enhanced cell adhesion and osteogenic differentiation

Goreninskii, S., Акимченко, И. О., Vorobyev, A. M., Анатольевич, К. М., Efremov, Y. M., Sudarev, E. A., Timashev, P. S., Zvyagin, A. V., Больбасов, Е. Н., & Tverdokhlebov, S. I. (2025) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2025.114777 · Cited by 9

Semi-fluorinated (6F) polyaryl ethers and polyphenylenes via interfacial electrophilic condensation polymerization with hexafluoroacetone hydrate

Muñoz, G. A., Chamberlain, K. M., Athukorale, S. A., Pittman, C. U., & Smith, D. W. (2023) · Polymer · doi:10.1016/j.polymer.2023.126642 · Cited by 8

Elucidation of crystalline morphology, crystallinity and mechanical properties of carbon fibre/PEEK composites under different cooling rates

Bandaru, A. K., Lahellec, S., Ma, H., Barnana, H. D., & O’Higgins, R. M. (2024) · Journal of Composite Materials · doi:10.1177/00219983241297571 · Cited by 8

State-of-the-art of poly(ether ether ketone) matrix reinforced with nanocarbons (carbon nanotube/carbon black) and carbon fibers—promising design, physical attributes and futuristic opportunities

Kausar, A. (2025) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057251344251 · Cited by 8

The Effect of Low-Temperature Plasma Treatment on the Adhesive Bonding Performance of CF/PEKK Surfaces

Liwei, W., Dong, Z., & Wang, R. (2025) · Surfaces · doi:10.3390/surfaces8030041 · Cited by 8

An integrated stamp forming and injection overmolding process for thermoplastic composite components: Enhancing overmolding interface

Liu, J., Quan, D., Ma, Y., Bai, S., Wang, X., Yang, X., & Zhao, G. (2025) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2025.08.022 · Cited by 8

Investigation of thermoforming processes of aerostructures: Simulation and microstructural analysis

Çobanoğlu, M., Ece, R. E., Ünlü, B., Öz, Y., Toros, S., & Öztürk, F. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13629-1 · Cited by 8

Crystallisation behaviour and morphological studies of PEKK and carbon fibre/PEKK composites

Pérez-Martín, H., Mackenzie, P., Baidak, A., Brádaigh, C. M. Ó., & Ray, D. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.106992 · Cited by 101

The Influence of Carbon Fiber on Crystallization and Morphology of Poly(Ether Ketone Ketone) Composites Towards High Rate Thermoplastic Manufacturing Processes

Enos, N. R., McNair, O. D., & Wiggins, J. S. (2024) · SAMPE JOURNAL · doi:10.33599/sj.v60no6.02 · Cited by 1

The crystallisation of Poly (aryl ether etherketone) (PEEK) and its carbon fibre composites

Herrod-Taylor, A. J. (2011) · UPT. Syiah Kuala University Library (Syiah Kuala University) · Cited by 4

Performances mécaniques de matériaux composites à matrice thermoplastique PEKK liées aux paramètres de mise en oeuvre

Choupin, T. (2017) · HAL

Studying crystallinity gradients in high performance thermoplastic composites manufactured by automated tape placement

Pérez-Martín, H. (2024) · ERA · doi:10.7488/era/4135