Mimicking mussel adhesion to improve interfacial properties in composites
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The macroscale properties of polymer-matrix composites depend immensely on the quality of the interaction between the reinforcement phase and the bulk polymer. This work presents a method to improve the interfacial adhesion between metal-oxides and a polymer matrix by performing surface-initiated polymerization (SIP) by way of a biomimetic initiator. The initiator was modeled after 3,4-dihydroxy-L-phenylalanine (dopa), an amino acid that is highly concentrated in mussel foot adhesive proteins. Mechanical pull out tests of NiTi and Ti-6Al-4V wires from poly (methyl methacrylate) (PMMA) were performed to directly test the interfacial adhesion. These tests demonstrated improvements in maximum interfacial shear stress of 116% for SIP-modified NiTi wires and 60% for SIP-modified Ti-6Al-4V wires over unmodified specimens. Polymer chain growth from the metal oxides was validated using x-ray photoemission spectroscopy (XPS), ellipsometry, scanning electron microscopy (SEM), and contact angle analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Single-molecule mechanics of mussel adhesion
Lee, H., Scherer, N. F., & Messersmith, P. B. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0605552103 · Cited by 2,112
Self-citationPolyphosphoprotein from the Adhesive Pads of Mytilus edulis
Waite, J. H., & Qin, X. (2001) · Biochemistry · doi:10.1021/bi002718x · Cited by 610
Papov, V. V., Diamond, T. V., Biemann, K., & Waite, J. H. (1995) · Journal of Biological Chemistry · doi:10.1074/jbc.270.34.20183 · Cited by 329 · cited 1×
“edulis foot protein-3 [21] and 26 mol% of foot protein-5 [22] that are found at the substrate–pad interface.”
BackgroundPolymer nanocomposites: A small part of the story
Schadler, L. S., Brinson, L. C., & Sawyer, W. G. (2007) · JOM · doi:10.1007/s11837-007-0040-5 · Cited by 298
Self-citation
Cited by
Barbey, R., Lavanant, L., Paripovic, D., Schüwer, N., Sugnaux, C., Tugulu, S., & Klok, H.-A. (2009) · Chemical Reviews · doi:10.1021/cr900045a · Cited by 1,753
Bioinspired catecholic chemistry for surface modification
Ye, Q., Zhou, F., & Liu, W. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15026j · Cited by 1,177
Zoppe, J. O., Ataman, N. C., Mocny, P., Wang, J., Moraes, J., & Klok, H.-A. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00314 · Cited by 1,046
Catechol‐Based Biomimetic Functional Materials
Sedó, J., Saiz‐Poseu, J., Busqué, F., & Ruiz‐Molina, D. (2013) · Advanced Materials · doi:10.1002/adma.201202343 · Cited by 752
Catechols as versatile platforms in polymer chemistry
Faure, E., Falentin-Daudré, C., Jérôme, C., Lyskawa, J., Fournier, D., Woisel, P., & Detrembleur, C. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.004 · Cited by 616
Metadata
- Authors
- HAMMING, L., FAN, X., MESSERSMITH, P., & BRINSON, L.
- Venue
- Composites Science and Technology
- Publisher
- Elsevier BV
- Published
- 2008-07
- Volume
- 68
- Issue
- 9
- Pages
- 2042-2048
- ISSN
- 0266-3538 (ISSN-L)
- OpenAlex
- W2090024293
- Cited by
- 72
- References
- 4
- FWCI
- 2.38
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.