The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Mix proportions and mechanical properties of concrete containing very high-volume of Class F fly ash
Open accessAbstract
Two types of Class F fly ash with 4.6% and 7.8% loss on ignition were used for an experimental investigation dealing with concrete incorporating very high volumes of Class F fly ash (HVFA). A rational mix design method was developed for concrete with 20–80% fly ash replacement for cement. Tests were performed for fresh and hardened concrete properties. Test results indicated that the setting times and the air content of fly-ash concrete increased as the fly ash replacement level increased. The compressive and flexural strength of the HVFA concrete mixtures demonstrated continuous and significant improvement at late ages of 91 and 365 days. Relation was formulated for flexural and compressive strength for all grades of HVFA concrete. The concrete mixture containing low-LOI fly ash exhibited superior mechanical properties than those of the corresponding mixture containing high-LOI fly ash. These results confirm the feasibility that up to 80% of Class F fly ash can be suitably used as cement replacement in concrete by using a rational mixture proportions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Performance characteristics of high-volume Class F fly ash concrete
Siddique, R. (2003) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.09.002 · Cited by 647
State of the Art Report on High-Strength Concrete
ACI Committee (1984) · ACI Journal Proceedings · doi:10.14359/10692 · Cited by 622
A study on high strength concrete prepared with large volumes of low calcium fly ash
Poon, C. S., Lam, L., & Wong, Y. L. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00271-9 · Cited by 410
Bouzoubaâ, N., Zhang, M. H., & Malhotra, V. M. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00592-0 · Cited by 230
Shah, S. P., & Ahmad, S. H. (1985) · PCI Journal · doi:10.15554/pcij.11011985.92.119 · Cited by 206
High-Volume Fly Ash Concrete with High Strength and Low Drying Shrinkage
Atiş, C. D. (2003) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2003)15:2(153 · Cited by 202
Durability of concrete incorporating high-volume of low-calcium (ASTM Class F) fly ash
Malhotra, V. M. (1990) · Cement and Concrete Composites · doi:10.1016/0958-9465(90)90006-j · Cited by 181
(1987) · ACI Materials Journal · doi:10.14359/1612 · Cited by 174
Properties of fresh concrete containing large amounts of fly ash
Ravina, D., & Mehta, P. K. (1986) · Cement and Concrete Research · doi:10.1016/0008-8846(86)90139-0 · Cited by 132
Durability of Concrete Incorporating High Volumes of Fly Ash From Sources in the U.S.A.
Bilodeau, A., Sivasundaram, V., Painter, K. E., & Malhotra, V. M. (1994) · ACI Materials Journal · doi:10.14359/4411 · Cited by 122
Cited by
Silva, R. V., de Brito, J., & Dhir, R. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.117 · Cited by 1,229
Xu, G., & Shi, X. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.010 · Cited by 521
de Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
Nayak, D. K., Abhilash, P. P., Singh, R., Kumar, R., & Kumar, V. (2022) · Cleaner Materials · doi:10.1016/j.clema.2022.100143 · Cited by 347
Atiş, C. D., Görür, E. B., Karahan, O., Bilim, C., İlkentapar, S., & Luga, E. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.089 · Cited by 329
Metadata
- Authors
- Huang, C.-H., Lin, S.-K., Chang, C.-S., & Chen, H.-J.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2013-09
- Volume
- 46
- Pages
- 71-78
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2114368359
- Cited by
- 302
- References
- 14
- FWCI
- 23.21
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mix proportions and mechanical properties of concrete containing very high-volume of Class F fly ash. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2013.04.016
- The paper
- Huang, C.-H., Lin, S.-K., Chang, C.-S., & Chen, H.-J. (2013). Mix proportions and mechanical properties of concrete containing very high-volume of Class F fly ash. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2013.04.016
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.