The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Novel lightweight concrete containing manufactured plastic aggregate
Open accessAbstract
Abstract Plastic waste and its low recycling rate make a significant contribution towards the pollution of the environment. It is therefore essential that plastic waste is utilised in different applications, such as aggregates in concrete. In this paper, an investigation of a manufactured plastic aggregate as a replacement for volcanic lightweight aggregate and Lytag aggregate in concrete is presented. The influence of replacement level on the fresh, hardened and microstructure properties of concrete was investigated. The slump, compressive strength, flexural strength, splitting tensile strength and elastic modulus decreased with the increase in replacement level. Neither the fresh density nor the hardened density was significantly affected by replacement level. The Lytag and conventional lightweight concrete mixes had a brittle failure; whereas the concrete mixes incorporating the manufactured plastic aggregate had a ductile post-peak behaviour. The results suggest that the concrete mix containing the manufactured plastic aggregate at a replacement level of 25% can be used in structural and non-structural applications requiring moderate strength and ductility. Predictive models were proposed and demonstrated to be in good agreement with the experimental results for the mechanical properties of the concrete mixes incorporating the manufactured plastic aggregate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Albano, C., Camacho, N., Hernández, M., Matheus, A., & Gutiérrez, A. (2009) · Waste Management · doi:10.1016/j.wasman.2009.05.007 · Cited by 504
Cited by
de Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
Use of recycled plastic as fine aggregate in cementitious composites: A review
Almeshal, I., Tayeh, B. A., Alyousef, R., Alabduljabbar, H., Mustafa Mohamed, A., & Alaskar, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119146 · Cited by 313
Mechanical and physical properties and morphology of concrete containing plastic waste as aggregate
Belmokaddem, M., Mahi, A., Senhadji, Y., & Pekmezci, B. Y. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119559 · Cited by 256
A review on the influence of recycled plastic aggregate on the engineering properties of concrete
Guo, Y.-C., Li, X.-M., Zhang, J., & Lin, J.-X. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.107787 · Cited by 56
Mechanical, physical and microstructural properties of a mortar with melted plastic waste binder
Thiam, M., & Fall, M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124190 · Cited by 27
Metadata
- Authors
- Alqahtani, F. K., Ghataora, G., Khan, M. I., & Dirar, S.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2017-09
- Volume
- 148
- Pages
- 386-397
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2614042289
- Cited by
- 167
- References
- 1
- FWCI
- 13.31
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Novel lightweight concrete containing manufactured plastic aggregate. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2017.05.011
- The paper
- Alqahtani, F. K., Ghataora, G., Khan, M. I., & Dirar, S. (2017). Novel lightweight concrete containing manufactured plastic aggregate. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2017.05.011
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.