The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Effects of fly ash characteristics and alkaline activator components on compressive strength of fly ash-based geopolymer mortar
Open accessAbstract
The compressive strength of fly ash-based geopolymer mortar (FBGM) made from five different sources of fly ash was examined. The weight ratio of alkaline activator to fly ash content (AL/FA), the weight ratio of sodium silicate to sodium hydroxide (Na2SiO3/NaOH) and concentration of the NaOH were considered the main parameters. A total of 180 FBGM mixes were prepared and tested for compressive strength. The results indicated that the optimum AL/FA ratio for activating fly ashes was in the range of 0.5 and 0.6. The compressive strength of the FBGM that were mixed with different fly ashes exhibited different response to the increase of the Na2SiO3/NaOH ratio and NaOH concentration. Fly ashes with a high content of fine particles and amorphous components such as SiO2 and Al2O3 activated at a low dosage of Na2SiO3/NaOH ratio and NaOH. While the activation of fly ashes with a low content of fine particles and amorphous components required a high dosage of Na2SiO3/NaOH ratio and NaOH. An artificial neural network was developed and the analytical results showed high performance in predicting the compressive strengths of the FBGM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927
The characterisation of source materials in fly ash-based geopolymers
van Jaarsveld, J. G. S., van Deventer, J. S. J., & Lukey, G. C. (2003) · Materials Letters · doi:10.1016/s0167-577x(02)00971-0 · Cited by 416
Rickard, W. D. A., Williams, R., Temuujin, J., & van Riessen, A. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.01.005 · Cited by 243
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Wang, A., Zheng, Y., Zhang, Z., Liu, K., Li, Y., Shi, L., & Sun, D. (2020) · Engineering · doi:10.1016/j.eng.2019.08.019 · Cited by 389
John, S. K., Nadir, Y., & Girija, K. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122443 · Cited by 290
Fly ash based geopolymer stabilisation of silty clay/blast furnace slag for subgrade applications
Sukprasert, S., Hoy, M., Horpibulsuk, S., Arulrajah, A., Rashid, A. S. A., & Nazir, R. (2021) · Road Materials and Pavement Design · doi:10.1080/14680629.2019.1621190 · Cited by 99
Metadata
- Authors
- Hadi, M. N. S., Al-Azzawi, M., & Yu, T.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 175
- Pages
- 41-54
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2802707565
- Cited by
- 199
- References
- 3
- FWCI
- 14.59
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.