The DOI matches its Crossref record; 150 of the 152 references it cites were found in a registry or an index.
Optical and thermal performance of glazing units containing PCM in buildings: A review
Abstract
Abstract Glazing units are important for providing passive solar gain and air ventilation in buildings, but their thermal performance is very poor compared to other building components, which results that energy loss from building envelope becomes much more drastic when the glazing area is large. Incorporating phase change material (PCM) in the glazing unit is an effective approach to increase its thermal performance. The glazing unit containing PCM can absorb part of the solar radiation for thermal energy storage while letting the visible radiation enter the indoor ambient for daylighting, which results in reduction of the temperature fluctuations and improvement of the thermal comfort of indoor occupants. A lot of researchers investigated optical and thermal performance of window systems containing PCM in buildings. However, there is a lack of published research review including numerical methods of optical and thermal performance and physical parameters of PCM used in the glazing units, especially for the optical performance of glazing units containing PCM. The present work reviews the experimental and simulation researches on the optical and thermal performance of glazing units containing PCM and discusses the employed research methods, mathematical models and important conclusions drawn. Finally, the challenges and future works of glazing units containing PCM are addressed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Therefore, and bearing in mind that it has different melting points, it can be used to enhance indoor thermal performance by using it in double-glazed units, thereby reducing the energy demand of the building [28].”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [28]
In the citing paper
“Eutectic phase change materials involve a combination of two or more types of phase change materials, which usually consist of organic-organic (Capric-laurie/Lauric palmitic/Myristic-stearic), inorganic-inorganic (LiOH-KOH/MgKCl 2 -KCl/BACl 2 -KCl-NaCl) and inorganic-organic (Napthalenebenzoicacid/Urea NH 4 Br) materials [28].”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [28]
In the citing paper
“Some inevitable drawbacks of paraffin limit its application in practice, such as low thermal conductivity (about 0.2À0.4W/ m K and high volume expansion during phase transition [22,28].”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [28]
In the citing paper
“Paraffin due to its crucial properties consisting of a high heat of fusion, fluctuated stage change temperature, high phase change enthalpy, zero super cooling characteristics, lower vapour pressure, and being chemically inert (without corrosion and toxicity), with constant conductivity cyclic stability has been applied for energy storage [26,28].”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [28]
Citations
Cites
Barron, R. F. (1999) · CRC Press eBooks · doi:10.1201/b15230-9 · Cited by 3,537
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Khudhair, A. M., & Farid, M. M. (2003) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00131-6 · Cited by 1,398
PCM thermal storage in buildings: A state of art
Tyagi, V. V., & Buddhi, D. (2005) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.10.002 · Cited by 1,137
Aerogel insulation for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.12.012 · Cited by 1,094
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H. J., Nejat, P., Majid, M. Z. A., Wahid, M. B. A., Jomehzadeh, F., Famileh, I. Z., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,082
Phase change materials for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.026 · Cited by 1,048
Toward aerogel based thermal superinsulation in buildings: A comprehensive review
Cüce, E., Cuce, P. M., Wood, C. J., & Riffat, S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.03.017 · Cited by 806
Iguchi, M., & Ilegbusi, O. J. (2013) · Springer eBooks · doi:10.1007/978-4-431-54020-5_6 · Cited by 710
Fenestration of today and tomorrow: A state-of-the-art review and future research opportunities
Jelle, B. P., Hynd, A., Gustavsen, A., Arasteh, D., Goudey, H., & Hart, R. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.08.010 · Cited by 554
Research works printed but not linked: 3
- Zhong, 2014, Dynamic heat transfer characteristics of PCM-filled glass window and hollow glass window, CIESC J., 65, 114
- Mohammad, 2017, Thermal performance evaluation of low-E coated building glazing systems, Naqshejahan, 6, 025
- Kolacek, 2017, Experimental and numerical research of the thermal properties of a PCM window panel, Sustainability, 9, 1, 10.3390/su9071222 · DOI
Cited by
Latent thermal energy storage technologies and applications: A review
Jouhara, H., Żabnieńska-Góra, A., Khordehgah, N., Ahmad, D., & Lipinski, T. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2020.100039 · Cited by 543
“Therefore, and bearing in mind that it has different melting points, it can be used to enhance indoor thermal performance by using it in double-glazed units, thereby reducing the energy demand of the building [28].”
BackgroundMethodInfluentialHassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Zhang, S., Ocłoń, P., Klemeš, J. J., Michorczyk, P., Pielichowska, K., & Pielichowski, K. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112560 · Cited by 275
Rathore, P. K. S., Gupta, N. K., Yadav, D., Shukla, S. K., & Kaul, S. (2022) · Sustainable Cities and Society · doi:10.1016/j.scs.2022.103690 · Cited by 268
Nundy, S., Mesloub, A., Alsolami, B. M., & Ghosh, A. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126854 · Cited by 254
Metadata
- Authors
- Li, D., Wu, Y., Wang, B., Liu, C., & Arıcı, M.
- Affiliations
- Northeast Petroleum University (CN)
- Kocaeli Üniversitesi (TR)
- Corresponding author
- Li, Dong
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 233
- Pages
- 117327
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2981757296
- Cited by
- 216
- References
- 152
- Citations by year
- 2026: 12 · 2025: 19 · 2024: 38 · 2023: 36 · 2022: 26 · 2021: 53 · 2020: 32
- FWCI
- 15.61
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Construction and Building Materials (publishedVersion)
- Kocaeli Üniversitesi - AVESİS (submittedVersion)
- Funders
- Northeast Petroleum University
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Building and Construction › Solar Energy Systems and Technologies
- Physical Sciences › Engineering › Building and Construction › Building Energy and Comfort Optimization
- Keywords
- phase change materials, glazing units, windows, optical performance, thermal performance, solar energy storage, daylighting, thermal comfort, thermal simulation model
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
